{"title":"Davey Centrifugal Pumps","description":"\u003cp\u003eDavey centrifugal pumps are designed for reliable water transfer, pressure boosting, and irrigation applications across residential, agricultural, and commercial environments. Built for Australian conditions, Davey pumps are known for their durability, strong performance, and long service life.\u003c\/p\u003e\n\u003cp\u003eThe range includes single-stage centrifugal pumps suitable for clean water applications such as tank transfer, irrigation systems, and general water supply. With robust construction and proven engineering, Davey centrifugal pumps deliver dependable performance for everyday use.\u003c\/p\u003e\n\u003cp\u003eShop Davey centrifugal pumps online with Australia-wide delivery and expert support.\u003c\/p\u003e","products":[{"product_id":"davey-boremaster-60061r-noryl-high-flow-centrifugal-irrigation-pump","title":"Davey Boremaster 60061R Noryl High Flow Centrifugal Irrigation Pump with Single Impeller","description":"\u003cp\u003eThe Davey Boremaster 60061R is a rugged single-stage centrifugal irrigation pump designed specifically for Western Australian conditions.\u003c\/p\u003e\n\u003cp\u003eEngineered for shallow well applications with suction lift up to 7 metres, the 60061R delivers high flow performance for garden reticulation, water transfer and irrigation systems. With a maximum head of 31.6 metres and flow up to 315 L\/Min, this pump is built for reliable residential and light rural use.\u003c\/p\u003e\n\u003cp\u003eFeaturing a glass-filled Noryl pump casing with reinforced inlet and outlet ports, stainless steel shaft and IP56 TEFC motor, the Boremaster range is built for durability, frequent starts and long service life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle stage centrifugal irrigation pump\u003c\/li\u003e\n\u003cli\u003eMaximum head: 31.6 m\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 315 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7 m\u003c\/li\u003e\n\u003cli\u003eGlass-filled Noryl pump casing\u003c\/li\u003e\n\u003cli\u003eReinforced inlet and outlet ports\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft\u003c\/li\u003e\n\u003cli\u003eDouble contact mechanical seal\u003c\/li\u003e\n\u003cli\u003eIP56 TEFC motor\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal overload protection (single phase)\u003c\/li\u003e\n\u003cli\u003e2m power lead with 10A Australian plug\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent starts\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50530808889591,"sku":"60061R","price":895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/DaveyBoremaster60061RNorylHighFlowCentrifugalIrrigationPump.png?v=1772501836"},{"product_id":"davey-dynaprime-x201-noryl-self-priming-transfer-pump-with-single-impeller","title":"Davey Dynaprime X201 Noryl Self Priming Transfer Pump with Single Impeller","description":"\u003cp\u003eThe Davey Dynaprime X201 is a compact, economical self-priming transfer pump designed for clean or grey water applications including water supply, tank draining, septic transfer and irrigation duties.\u003c\/p\u003e\n\u003cp\u003eFeaturing a single-stage open vane impeller and stainless steel wear plate, the Dynaprime X201 is capable of handling small fibres and soft solids while delivering reliable performance. The inbuilt check valve allows quick self-priming up to 7.5 metres suction lift.\u003c\/p\u003e\n\u003cp\u003eConstructed from corrosion-resistant glass-filled Noryl with a marine grade aluminium motor shell, the X201 is built for durability and frequent starts. Ideal for farm, irrigation and general water transfer applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-priming centrifugal transfer pump\u003c\/li\u003e\n\u003cli\u003eSingle stage (single impeller)\u003c\/li\u003e\n\u003cli\u003eOpen vane impeller design\u003c\/li\u003e\n\u003cli\u003eMaximum head: 18 m\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 195 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.5 m\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl pump casing\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller wear plate\u003c\/li\u003e\n\u003cli\u003eInbuilt check valve\u003c\/li\u003e\n\u003cli\u003eMechanical shaft seal (carbon\/ceramic)\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 protection\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent starts\u003c\/li\u003e\n\u003cli\u003eEasy priming via top-mounted priming plug\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50530835333367,"sku":"74101","price":975.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/DaveyDynaprimeX201NorylSelfPrimingTransferPumpwithSingleImpeller.png?v=1772504231"},{"product_id":"davey-xf171-stainless-steel-centrifugal-transfer-pump-with-single-impeller","title":"Davey XF171 Stainless Steel Centrifugal Transfer Pump with Single Impeller","description":"\u003cp\u003eThe Davey XF171 is a compact and reliable single stage centrifugal transfer pump designed for clean water applications including irrigation, aquaculture, hydroponics, washing systems and general water transfer.\u003c\/p\u003e\n\u003cp\u003eEngineered with corrosion-resistant components and a stainless steel pump shaft, the XF171 delivers strong performance with flows up to 175 L\/Min and heads up to 17 metres. The TEFC IP55 motor provides protection against dust, moisture and harsh operating conditions.\u003c\/p\u003e\n\u003cp\u003eBuilt for frequent starts and continuous duty, the XF171 features a high-quality mechanical seal, permanently split capacitor motor design and automatic reset thermal overload protection for long service life and dependable operation.\u003c\/p\u003e\n\u003cp\u003eIdeal for farm and irrigation applications where durability and compact performance are essential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle stage centrifugal transfer pump\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 175 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum head: 17 m\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.5 m\u003c\/li\u003e\n\u003cli\u003eTEFC IP55 motor\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eGlass filled corrosion resistant pump casing\u003c\/li\u003e\n\u003cli\u003eClosed vane corrosion proof impeller\u003c\/li\u003e\n\u003cli\u003eHigh quality carbon\/ceramic mechanical seal\u003c\/li\u003e\n\u003cli\u003ePermanently split capacitor motor\u003c\/li\u003e\n\u003cli\u003eAutomatic reset thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent starts\u003c\/li\u003e\n\u003cli\u003e2m power lead with 10A Australian plug\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50530864660727,"sku":"71101","price":625.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/DaveyXF171StainlessSteelCentrifugalTransferPumpwithSingleImpeller.png?v=1772505452"},{"product_id":"davey-xf92-stainless-steel-centrifugal-transfer-pump-with-twin-impeller","title":"Davey XF92 Stainless Steel Centrifugal Transfer Pump with Twin Impeller","description":"\u003cp\u003eThe Davey XF92 is a compact twin stage centrifugal transfer pump designed for higher head clean water applications including irrigation, tank filling, hydroponics, aquaculture and general water transfer.\u003c\/p\u003e\n\u003cp\u003eFeaturing a twin impeller design, the XF92 delivers improved pressure performance with heads up to 28 metres while maintaining efficient flow rates up to 98 L\/Min. Built with corrosion-resistant materials and a 304 stainless steel pump shaft, it is engineered for long service life in demanding farm and irrigation environments.\u003c\/p\u003e\n\u003cp\u003eThe TEFC IP55 motor provides protection against dust and moisture, while the permanently split capacitor design and automatic reset thermal overload protection ensure reliable starting and safe operation.\u003c\/p\u003e\n\u003cp\u003eIdeal for installations requiring stronger pressure than standard single stage transfer pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwin stage centrifugal transfer pump\u003c\/li\u003e\n\u003cli\u003eTwin impeller design for higher head performance\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 98 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum head: 28 m\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.0 m\u003c\/li\u003e\n\u003cli\u003eTEFC IP55 motor\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eStainless steel pump casing (twin stage models)\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant impellers\u003c\/li\u003e\n\u003cli\u003eHigh quality carbon\/ceramic mechanical seal\u003c\/li\u003e\n\u003cli\u003ePermanently split capacitor motor\u003c\/li\u003e\n\u003cli\u003eAutomatic reset thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent starts\u003c\/li\u003e\n\u003cli\u003e2m power lead with 10A Australian plug\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50530868625655,"sku":"71401","price":750.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/DaveyXF171StainlessSteelCentrifugalTransferPumpwithSingleImpeller.png?v=1772505452"},{"product_id":"davey-xf221-glass-filled-noryl-electric-transfer-pump-for-irrigation-and-liquid-transfer-with-closed-vane-impeller","title":"Davey XF221 Technopolymer Electric Transfer Pump for Liquid Transfer with Closed Vane Impeller","description":"\u003cp\u003eThe Davey XF221 electric transfer pump is designed for handling clean, non-volatile liquids in applications such as irrigation, aquaculture, hydroponics, washing systems, and general liquid transfer. It is suitable for installations where reliable and consistent water movement is required.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 225 L\/Min and develops pressure up to approximately 20 m head, providing strong performance for medium head transfer duties. It is ideal for systems that require steady flow with moderate pressure capability.\u003c\/p\u003e\n\u003cp\u003eThe pump is constructed with a glass filled Noryl casing and a closed vane corrosion-proof impeller, ensuring efficient hydraulic performance and durability. Internal components such as the stainless steel shaft and mechanical seal are designed for long service life and reliable operation.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.70 kW single phase motor operating on 240V supply at 2850 rpm. The TEFC motor design with IP55 protection and Class F insulation ensures dependable performance in harsh environments, while built-in thermal overload protection enhances operational safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl pump casing with corrosion resistance\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for durability\u003c\/li\u003e\n\u003cli\u003eHigh quality mechanical shaft seal\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for reliable performance\u003c\/li\u003e\n\u003cli\u003eInbuilt automatic thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCompact and easy to service design\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729363112183,"sku":"71201","price":770.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/XF221.png?v=1777704551"},{"product_id":"davey-xf192-stainless-steel-electric-transfer-pump-for-hydroponic-systems-with-closed-vane-impeller","title":"Davey XF192 Stainless Steel Electric Transfer Pump for Hydroponic Systems with Closed Vane Impeller","description":"\u003cp\u003eThe Davey XF192 electric transfer pump is designed for handling clean, non-volatile liquids in applications such as irrigation systems, hydroponics, aquaculture, washing systems, and general liquid transfer. It is ideal for installations requiring reliable and consistent water movement without solids.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 190 L\/Min and develops pressure up to approximately 33 m head, making it suitable for applications requiring higher pressure compared to standard transfer pumps while maintaining stable flow performance.\u003c\/p\u003e\n\u003cp\u003eThe pump features a durable construction with corrosion-resistant materials, including stainless steel components and a closed vane impeller for efficient hydraulic performance. Internal sealing and shaft components are engineered to ensure long service life and dependable operation.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.80 kW single phase motor operating on 240V supply at 2850 rpm. The TEFC motor design with IP55 protection and Class F insulation ensures reliable operation in demanding environments, while built-in thermal overload protection enhances safety during continuous use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant pump construction\u003c\/li\u003e\n\u003cli\u003eStainless steel shaft for durability\u003c\/li\u003e\n\u003cli\u003eHigh quality mechanical shaft seal\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for reliable operation\u003c\/li\u003e\n\u003cli\u003eInbuilt automatic thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCompact and easy to service design\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729387819255,"sku":"71301","price":980.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-xf192-stainless-steel-electric-transfer-pump-hydroponic-systems-closed-vane-impeller.png?v=1777704097"},{"product_id":"davey-xf171s-glass-filled-noryl-electric-transfer-pump-for-chemical-handling-with-closed-vane-impeller","title":"Davey XF171S Technopolymer Electric Transfer Pump for Chemical Handling with Closed Vane Impeller","description":"\u003cp\u003eThe Davey XF171S electric transfer pump is designed for handling clean, non-volatile liquids in applications such as aquaculture, hydroponics, desalinated water systems, washing systems, and mild chemical transfer. It is suitable for environments where corrosion resistance and reliability are important.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 175 L\/Min and develops pressure up to approximately 17 m head, making it ideal for moderate head transfer duties where consistent liquid movement is required.\u003c\/p\u003e\n\u003cp\u003eThe pump is constructed with a corrosion-resistant glass filled Noryl casing and features a closed vane impeller for efficient hydraulic performance. It is equipped with a silicon carbide mechanical seal, which provides superior durability and makes it suitable for handling mildly aggressive liquids.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.53 kW single phase motor operating on 240V supply at 2850 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection and Thermotection safeguard the pump during adverse operating conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon carbide (SIC) mechanical seal for chemical resistance\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl corrosion-resistant casing\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.5 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for durability\u003c\/li\u003e\n\u003cli\u003eInbuilt thermal overload protection\u003c\/li\u003e\n\u003cli\u003eThermotection against closed head operation\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start and continuous operation\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729479241975,"sku":"71101S","price":691.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-xf171s-glass-filled-noryl-electric-transfer-pump-chemical-handling-closed-vane-impeller.png?v=1777705089"},{"product_id":"davey-xf192s-316-stainless-steel-electric-transfer-pump-for-corrosive-liquid-handling-with-closed-vane-impeller","title":"Davey XF192S Stainless Steel Electric Transfer Pump for Corrosive Liquid Handling with Closed Vane Impeller","description":"\u003cp\u003eThe Davey XF192S electric transfer pump is designed for handling clean, non-volatile liquids in demanding environments such as aquaculture, hydroponics, desalinated water systems, washing systems, and mild chemical applications. It is ideal for installations where corrosion resistance and durability are critical.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 190 L\/Min and develops pressure up to approximately 33 m head, providing strong performance for applications requiring higher pressure along with steady flow.\u003c\/p\u003e\n\u003cp\u003eThe pump features a 316 stainless steel casing combined with a closed vane impeller, ensuring excellent corrosion resistance and efficient hydraulic performance. It is equipped with a silicon carbide mechanical seal, offering superior durability when handling mildly aggressive or chemically treated liquids.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.80 kW single phase motor operating on 240V supply at 2850 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection and Thermotection safeguard the pump during closed head or adverse conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 stainless steel pump casing for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSilicon carbide (SIC) mechanical seal for chemical durability\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.5 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for long service life\u003c\/li\u003e\n\u003cli\u003eInbuilt thermal overload protection\u003c\/li\u003e\n\u003cli\u003eThermotection against closed head operation\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent starts and continuous operation\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729510928631,"sku":"71301S","price":1150.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-xf192s-316-stainless-steel-electric-transfer-pump-corrosive-liquid-handling-closed-vane-impeller.png?v=1777705489"},{"product_id":"davey-62001-dynaflo-technopolymer-centrifugal-transfer-pump-for-washdown-systems-with-single-impeller","title":"Davey 62001 Dynaflo Centrifugal Transfer Pump for Washdown Systems with Single Impeller","description":"\u003cp\u003eBuilt for demanding washdown and fluid handling duties, the Davey 62001 Dynaflo 6200 is designed to deliver consistent flow where frequent use and reliability are essential. It is well suited to environments such as dairies, factory floors, irrigation setups, and tank supply systems.\u003c\/p\u003e\n\n\u003cp\u003eThe pump produces up to 270 L\/Min while reaching a maximum pressure of 250 kPa, equivalent to 25.5 m head. With a suction capability of up to 7 m, it supports above-ground installations where stable priming and steady output are required.\u003c\/p\u003e\n\n\u003cp\u003eIts performance is driven by a single stage centrifugal design that enables efficient water movement without unnecessary complexity. The casing is manufactured from glass filled Noryl and reinforced with metal inlet and outlet ports, providing strength under continuous operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eOperational durability is supported by a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings. The TEFC motor offers IP56 protection and includes built-in thermal overload protection, allowing the pump to handle frequent starts and extended run times.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for flows up to 270 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum head up to 25.5 m\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl casing with reinforced ports\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for durability\u003c\/li\u003e\n\u003cli\u003eDouble contact seal with greased bearings\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eSuitable for frequent start applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729808363767,"sku":"62001","price":1150.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62001-dynaflo-technopolymer-centrifugal-transfer-pump-for-washdown-systems-with-single-impeller.png?v=1777708808"},{"product_id":"davey-62101-dynaflo-technopolymer-centrifugal-transfer-pump-for-irrigation-supply-with-single-impeller","title":"Davey 62101 Dynaflo Technopolymer Transfer Pump for Irrigation Supply with Single Impeller","description":"\u003cp\u003eDesigned to support irrigation distribution and general fluid handling across agricultural settings, the Davey 62101 Dynaflo 6210 provides increased output where higher flow demand is required. Its configuration suits applications where consistent delivery across multiple outlets is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers a maximum flow of 315 L\/Min and operates up to a pressure of 310 kPa, equivalent to 31.6 m head. With suction capability up to 7 m, it is suited to above-ground installations requiring dependable priming and steady flow performance.\u003c\/p\u003e\n\n\u003cp\u003eA single stage centrifugal design drives the hydraulic performance, allowing efficient movement of water without complex staging. The casing is constructed from glass filled Noryl and reinforced at critical connection points to maintain structural integrity under continuous use.\u003c\/p\u003e\n\n\u003cp\u003eInternal components include a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings to support durability. The TEFC motor features IP56 protection and incorporates thermal overload protection, enabling reliable operation during frequent start and stop cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for flows up to 315 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum head up to 31.6 m\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl casing with reinforced ports\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for durability\u003c\/li\u003e\n\u003cli\u003eDouble contact seal with greased bearings\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eSuitable for frequent start applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729829335287,"sku":"62101","price":1275.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62101-dynaflo-technopolymer-centrifugal-transfer-pump-for-irrigation-supply-with-single-impeller.png?v=1777710247"},{"product_id":"davey-62103-dynaflo-technopolymer-transfer-pump-for-tank-filling-with-single-impeller","title":"Davey 62103 Dynaflo Technopolymer Transfer Pump for Tank Filling with Single Impeller","description":"\u003cp\u003eDesigned to support irrigation distribution and general fluid handling across agricultural settings, the Davey 62101 Dynaflo 6210 provides increased output where higher flow demand is required. Its configuration suits applications where consistent delivery across multiple outlets is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers a maximum flow of 315 L\/Min and operates up to a pressure of 310 kPa, equivalent to 31.6 m head. With suction capability up to 7 m, it is suited to above-ground installations requiring dependable priming and steady flow performance.\u003c\/p\u003e\n\n\u003cp\u003eA single stage centrifugal design drives the hydraulic performance, allowing efficient movement of water without complex staging. The casing is constructed from glass filled Noryl and reinforced at critical connection points to maintain structural integrity under continuous use.\u003c\/p\u003e\n\n\u003cp\u003eInternal components include a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings to support durability. The TEFC motor features IP56 protection and incorporates thermal overload protection, enabling reliable operation during frequent start and stop cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for flows up to 315 L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum head up to 31.6 m\u003c\/li\u003e\n\u003cli\u003eGlass filled Noryl casing with reinforced ports\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for durability\u003c\/li\u003e\n\u003cli\u003eDouble contact seal with greased bearings\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eSuitable for frequent start applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729859645687,"sku":"62103","price":1335.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62103-dynaflo-technopolymer-transfer-pump-for-tank-filling-with-single-impeller.png?v=1777710804"},{"product_id":"davey-xf171-technopolymer-transfer-pump-for-pressure-boosting-with-closed-vane-impeller","title":"Davey XF171 Technopolymer Transfer Pump for Pressure Boosting with Closed Vane Impeller","description":"\u003cp\u003eThe Davey XF171 electric transfer pump is designed for handling clean, non-volatile liquids in applications such as pressure boosting, circulation systems, irrigation, and general transfer duties. It is suitable for installations where consistent flow and reliable performance are required without the presence of solids or fibres.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 160 L\/Min and develops pressure up to approximately 16 m head, making it suitable for moderate head transfer and circulation applications.\u003c\/p\u003e\n\u003cp\u003eThe pump is constructed using glass filled nylon 12 components, offering strong corrosion resistance and long-term durability. It features a closed vane impeller for efficient hydraulic performance, along with a stainless steel shaft and mechanical seal for dependable operation.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.45 kW output motor operating on 240V supply. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous or frequent use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003eGlass filled nylon 12 corrosion-resistant construction\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical shaft seal for reliable operation\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7.5 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for durability\u003c\/li\u003e\n\u003cli\u003eInbuilt thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for pressure boosting and circulation systems\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729861415159,"sku":"71101D","price":708.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-xf171-technopolymer-electric-transfer-pump-pressure-boosting-systems-closed-vane-impeller.png?v=1777710929"},{"product_id":"davey-62201-dynaflo-cast-iron-transfer-pump-for-irrigation-feed-with-single-impeller","title":"Davey 62201 Dynaflo Cast Iron Transfer Pump for Irrigation Feed with Single Impeller","description":"\u003cp\u003eHandling higher volumes across irrigation and storage systems requires a pump that can maintain both durability and steady output. The Davey 62201 Dynaflo 6220 is built for these conditions, supporting continuous operation where consistent delivery is critical.\u003c\/p\u003e\n\n\u003cp\u003eIt produces up to 360 L\/Min and operates at a maximum pressure of 380 kPa, which corresponds to 38.7 m head. With suction capability up to 7 m, the unit is suitable for above-ground installations where reliable priming is required.\u003c\/p\u003e\n\n\u003cp\u003eRather than relying on multi-stage components, the pump uses a single stage centrifugal arrangement to achieve efficient fluid movement. The casing is manufactured from cast iron and finished with a baked polyester coating, providing structural strength and resistance to wear in demanding environments.\u003c\/p\u003e\n\n\u003cp\u003eKey internal components include a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings to support long-term performance. The TEFC motor is built with IP56 protection and includes thermal overload protection, allowing dependable operation under frequent start conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron pump casing with baked polyester finish\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDouble contact mechanical seal for durability\u003c\/li\u003e\n\u003cli\u003eHigh temperature greased bearings for smooth operation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729870065911,"sku":"62201","price":2040.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62201-dynaflo-cast-iron-transfer-pump-for-irrigation-feed-with-single-impeller.png?v=1777711081"},{"product_id":"davey-62203-dynaflo-cast-iron-transfer-pump-for-bulk-water-supply-with-single-impeller","title":"Davey 62203 Dynaflo Cast Iron Transfer Pump for Bulk Water Supply with Single Impeller","description":"\u003cp\u003eBuilt for moving large volumes between storage points, the Davey 62203 Dynaflo 6220 is suited to applications where flow continuity is more critical than pressure boosting. It performs reliably in setups involving tank-to-tank transfer, storage handling, and open discharge movement.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to 360 L\/Min and develops a maximum pressure of 380 kPa, equivalent to 38.7 m head. With suction capability up to 7 m, it is designed for above-ground installations where consistent priming and uninterrupted flow are required.\u003c\/p\u003e\n\n\u003cp\u003eA single stage centrifugal mechanism drives the hydraulic performance, allowing efficient movement of water without multi-stage complexity. The cast iron casing, finished with a baked polyester coating, provides strength and durability under continuous duty conditions.\u003c\/p\u003e\n\n\u003cp\u003eKey internal components include a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings to support extended service life. The TEFC motor offers IP56 protection and includes thermal overload protection, ensuring reliable operation during frequent start cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron pump casing with baked polyester finish\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDouble contact mechanical seal for durability\u003c\/li\u003e\n\u003cli\u003eHigh temperature greased bearings for smooth operation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729870721271,"sku":"62203","price":2110.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62203-dynaflo-cast-iron-transfer-pump-for-bulk-water-movement-with-single-impeller.png?v=1777712247"},{"product_id":"davey-62303-dynaflo-cast-iron-transfer-pump-for-high-volume-transfer-with-single-impeller","title":"Davey 62303 Dynaflo Cast Iron Transfer Pump for High Volume Transfer with Single Impeller","description":"\u003cp\u003eMoving larger volumes across storage and distribution points requires a pump designed for throughput rather than pressure boosting. The Davey 62303 Dynaflo 6230 is suited to these conditions, supporting high-volume transfer across tanks, holding systems, and open discharge setups.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to 460 L\/Min and develops a maximum pressure of 410 kPa, equivalent to 41.8 m head. With suction capability up to 7 m, it is designed for above-ground installations where consistent priming and steady flow are essential.\u003c\/p\u003e\n\n\u003cp\u003eIts operation is based on a single stage centrifugal mechanism, allowing efficient fluid movement without the complexity of multi-stage designs. The cast iron casing, finished with a baked polyester coating, provides structural strength and resistance to wear during continuous duty operation.\u003c\/p\u003e\n\n\u003cp\u003eDurability is supported by a 304 stainless steel shaft, double contact mechanical seal, and high temperature greased bearings. The TEFC motor includes IP56 protection and built-in thermal overload protection, ensuring reliable performance under frequent start and extended run conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron pump casing with baked polyester finish\u003c\/li\u003e\n\u003cli\u003e304 stainless steel shaft for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDouble contact mechanical seal for durability\u003c\/li\u003e\n\u003cli\u003eHigh temperature greased bearings for smooth operation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729873113335,"sku":"62303","price":2430.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62303-dynaflo-cast-iron-transfer-pump-for-high-volume-transfer-with-single-impeller.png?v=1777712500"},{"product_id":"davey-cy70-75-a-stainless-steel-transfer-pump-for-dairy-washdown-systems-with-closed-vane-impeller","title":"Davey CY70-75\/A Stainless Steel Transfer Pump for Dairy Washdown Systems with Closed Vane Impeller","description":"\u003cp\u003eThe Davey CY70-75\/A transfer pump is designed for handling clean, non-volatile liquids in demanding environments such as dairy washdown, washing systems, small scale irrigation, and pressure boosting applications. It is suitable for installations requiring reliable and hygienic liquid transfer.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 150 L\/Min and develops pressure up to approximately 27 m head, making it suitable for moderate pressure applications with consistent flow requirements.\u003c\/p\u003e\n\u003cp\u003eThe pump features a 304 stainless steel construction including casing and impeller, providing excellent corrosion resistance and suitability for high temperature applications. Internal components are engineered for durability and long service life.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.75 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection enhances safety during continuous use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel casing and impeller construction\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient clean liquid transfer\u003c\/li\u003e\n\u003cli\u003eSuitable for high temperature liquids up to 80°C\u003c\/li\u003e\n\u003cli\u003eMechanical shaft seal with EPDM\/Viton elastomers\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for durability\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for dairy washdown and hygienic applications\u003c\/li\u003e\n\u003cli\u003eLow maintenance and easy installation design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729875308791,"sku":"CY70-75\/A","price":900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cy70-75a-304-stainless-steel-electric-transfer-pump-dairy-washdown-systems-closed-vane-impeller.png?v=1777712559"},{"product_id":"davey-cy70-90-a-stainless-steel-transfer-pump-for-irrigation-systems-with-closed-vane-impeller","title":"Davey CY70-90\/A Stainless Steel Transfer Pump for Irrigation Systems with Closed Vane Impeller","description":"\u003cp\u003eThe Davey CY70-90\/A transfer pump is designed for handling clean, non-volatile liquids in applications such as irrigation, washdown systems, water transfer, and pressure boosting. It is ideal for installations requiring higher flow capacity with reliable performance.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 200 L\/Min and develops pressure up to approximately 30 m head, providing strong performance for medium head transfer duties.\u003c\/p\u003e\n\u003cp\u003eThe pump features a 304 stainless steel casing and impeller, offering excellent corrosion resistance and durability. It is suitable for high temperature liquid handling and demanding operating conditions.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.90 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures dependable performance, while thermal overload protection enhances operational safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel pump construction\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMaximum liquid temperature up to 80°C\u003c\/li\u003e\n\u003cli\u003eMechanical shaft seal with EPDM\/Viton elastomers\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for reliable operation\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for irrigation and transfer applications\u003c\/li\u003e\n\u003cli\u003eEasy installation and low maintenance design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729878094071,"sku":"CY70-90\/A","price":1005.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cy70-90a-304-stainless-steel-electric-transfer-pump-irrigation-systems-closed-vane-impeller.png?v=1777713084"},{"product_id":"davey-cy70-110-a-stainless-steel-transfer-pump-for-pressure-boosting-systems-with-closed-vane-impeller","title":"Davey CY70-110\/A Stainless Steel Transfer Pump for Pressure Boosting Systems with Closed Vane Impeller","description":"\u003cp\u003eThe Davey CY70-110\/A transfer pump is designed for handling clean, non-volatile liquids in applications such as pressure boosting, washdown systems, irrigation, and water transfer. It is suitable for installations requiring higher pressure performance.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 120 L\/Min and develops pressure up to approximately 36 m head, making it ideal for high-pressure transfer duties.\u003c\/p\u003e\n\u003cp\u003eThe pump features a robust 304 stainless steel construction including casing and impeller, ensuring excellent corrosion resistance and suitability for high temperature liquid handling.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.10 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection supports safe and continuous use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel casing and impeller\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient performance\u003c\/li\u003e\n\u003cli\u003eMaximum liquid temperature up to 80°C\u003c\/li\u003e\n\u003cli\u003eMechanical shaft seal with EPDM\/Viton elastomers\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation for durability\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for high pressure applications\u003c\/li\u003e\n\u003cli\u003eLow maintenance and easy installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729883566327,"sku":"CY70-110\/A","price":1309.85,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cy70-110a-304-stainless-steel-electric-transfer-pump-pressure-boosting-systems-closed-vane-impeller.png?v=1777713374"},{"product_id":"davey-62201ss-dynaflo-stainless-steel-transfer-pump-for-saltwater-handling-with-single-impeller","title":"Davey 62201SS Dynaflo Stainless Steel Transfer Pump for Saltwater Handling with Single Impeller","description":"\u003cp\u003eDesigned for environments where fluid quality can affect standard pump materials, the Davey 62201SS Dynaflo 6220 is built to handle aggressive and corrosive liquids including seawater, brackish water, and light brines. Its construction allows reliable operation in applications where material durability is critical.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to 360 L\/Min and operates at a maximum pressure of 380 kPa, equivalent to 38.7 m head. With suction capability up to 7 m, it is suitable for above-ground installations requiring steady priming and consistent flow performance.\u003c\/p\u003e\n\n\u003cp\u003eA single stage centrifugal mechanism drives the hydraulic performance, enabling efficient transfer across storage, handling, and distribution systems. The pump casing is manufactured from cast 316 stainless steel, offering high resistance to corrosion and extended service life in demanding conditions.\u003c\/p\u003e\n\n\u003cp\u003eInternal components include a 316 stainless steel shaft and silicon carbide mechanical seal, supported by high temperature greased bearings for smooth operation. The TEFC motor features IP56 protection and built-in thermal overload protection, ensuring dependable performance during frequent start cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast 316 stainless steel pump casing for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e316 stainless steel shaft for extended service life\u003c\/li\u003e\n\u003cli\u003eSilicon carbide mechanical seal for durability\u003c\/li\u003e\n\u003cli\u003eO-ring sealed priming plugs for easy operation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eThermal overload protection with automatic reset\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729891594487,"sku":"62201SS","price":2750.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/62303SS-Dynaflo_1100x800_654e701c-f85e-4db8-b359-c6fde5a82d6a.png?v=1777713261"},{"product_id":"davey-62203ss-dynaflo-stainless-steel-transfer-pump-for-seawater-transfer-with-single-impeller","title":"Davey 62203SS Dynaflo Stainless Steel Transfer Pump for Seawater Transfer with Single Impeller","description":"\u003cp\u003eWhere fluid composition demands corrosion-resistant materials, the Davey 62203SS Dynaflo 6220 is designed to operate reliably with seawater, brackish water, and light brines. Its construction makes it suitable for environments where standard cast iron pumps may not provide long-term durability.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to 350 L\/Min and develops a maximum pressure of 380 kPa, equivalent to 38.7 m head. With suction capability up to 7 m, it supports above-ground installations requiring stable priming and continuous flow performance.\u003c\/p\u003e\n\n\u003cp\u003eIts operation is based on a single stage centrifugal transfer design, allowing efficient fluid movement across storage and handling systems without multi-stage complexity. The pump casing is manufactured from cast 316 stainless steel, providing high resistance to corrosion in aggressive water conditions.\u003c\/p\u003e\n\n\u003cp\u003eInternal components include a 316 stainless steel shaft and silicon carbide mechanical seal, supported by high temperature greased bearings for smooth and reliable operation. The TEFC motor is built with IP56 protection and supports consistent performance during extended duty cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast 316 stainless steel pump casing for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e316 stainless steel shaft for extended service life\u003c\/li\u003e\n\u003cli\u003eSilicon carbide mechanical seal for durability\u003c\/li\u003e\n\u003cli\u003eO-ring sealed priming plugs for easy operation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start applications\u003c\/li\u003e\n\u003cli\u003eDouble contact seal with high temperature greased bearings\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant motor mounting feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729895395575,"sku":"62203SS","price":2750.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-62203ss-dynaflo-316-stainless-steel-transfer-pump-for-saltwater-handling-with-single-impeller.png?v=1777714034"},{"product_id":"davey-dynaflo-62303ss-stainless-steel-transfer-pump-for-high-volume-irrigation-with-single-impeller","title":"Davey Dynaflo 62303SS Stainless Steel Transfer Pump for High Volume Irrigation with Single Impeller","description":"\u003cp\u003eThe Davey Dynaflo 62303SS transfer pump is designed for handling clean, non-volatile liquids in demanding applications such as irrigation, water transfer, tank filling, sprinkler supply, and washdown systems. It is suitable for use with fresh water, sea water, and lightly saline or brackish water conditions.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 440 L\/Min and develops pressure up to approximately 40 m head, providing strong performance for high volume transfer and moderate to high head applications.\u003c\/p\u003e\n\u003cp\u003eThe pump features a robust cast 316 stainless steel casing combined with corrosion-resistant internal components, making it suitable for aggressive water environments. It is equipped with a silicon carbide mechanical seal and a 316 stainless steel shaft, ensuring durability and long service life.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 3.0 kW three phase motor operating on 415V supply at 50Hz. The TEFC motor with IP56 protection and Class F insulation ensures reliable performance in harsh environments, while the pump is designed for frequent starts and long operational life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast 316 stainless steel pump casing for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSilicon carbide mechanical seal for long service life\u003c\/li\u003e\n\u003cli\u003e316 stainless steel shaft for aggressive water applications\u003c\/li\u003e\n\u003cli\u003eClosed vane impeller for efficient hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMaximum suction lift: 7 m\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eClass F insulation for durability\u003c\/li\u003e\n\u003cli\u003eDesigned for frequent start operations\u003c\/li\u003e\n\u003cli\u003eSuitable for saline and brackish water applications\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: 1°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50729895854327,"sku":"62303SS","price":3060.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-dynaflo-62303ss-stainless-steel-transfer-pump-for-high-volume-irrigation-with-single-impeller.png?v=1777714182"},{"product_id":"davey-cs32160-1-5s-304-stainless-steel-centrifugal-pump-for-industrial-applications-with-single-impeller","title":"Davey CS32160-1.5S Stainless Steel Centrifugal Pump for Industrial Applications with Single Impeller","description":"\u003cp\u003eSuited to clean water and process duties, the Davey CS32160-1.5S is designed for installations where corrosion resistance and hygienic construction are important. It is commonly applied across vineyard operations, dairy washdown, chiller systems, and small industrial applications requiring consistent performance.\u003c\/p\u003e\n\u003cp\u003eThe pump delivers flow up to approximately 312 L\/Min, derived from a performance point of 5.0 L\/sec, and operates at a maximum head of around 29 m based on the hydraulic curve. This allows stable operation across a range of duty conditions where both flow and moderate pressure are required.\u003c\/p\u003e\n\u003cp\u003eIts design follows a single stage end suction centrifugal configuration built to DIN (EN733) standards. The casing and impeller are manufactured from pressed 304 stainless steel, providing corrosion resistance and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor enables efficient maintenance of the wet end components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed 304 stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on 304 stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736216080631,"sku":"CS32160-1.5S","price":2082.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32160-1-5s-304-stainless-steel-centrifugal-pump-for-industrial-applications-with-single-impeller.png?v=1777862665"},{"product_id":"davey-cs32160-2-2s-stainless-steel-centrifugal-pump-for-process-water-systems-with-single-impeller","title":"Davey CS32160-2.2S Stainless Steel Centrifugal Pump for Process Water Systems with Single Impeller","description":"\u003cp\u003eDesigned for clean water and process duties, the Davey CS32160-2.2S is suited to installations where corrosion resistance and consistent hydraulic performance are required. It is commonly used across vineyard operations, dairy washdown systems, chiller circuits, and smaller process-based industrial setups.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers flow up to approximately 360 L\/Min and operates at a maximum head of around 36 m based on the performance curve. This allows it to maintain stable output across a wide operating range where both flow and pressure are required for system efficiency.\u003c\/p\u003e\n\n\u003cp\u003eIts design follows a single stage end suction centrifugal configuration built to DIN (EN733) standards. The casing and impeller are manufactured from pressed stainless steel, providing durability and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor enables efficient maintenance and reduced downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736225779959,"sku":"CS32160-2.2S","price":2422.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32160-2-2s-stainless-steel-centrifugal-pump-for-process-water-systems-with-single-impeller.png?v=1777863635"},{"product_id":"davey-cs40125-1-5s-stainless-steel-centrifugal-pump-for-washdown-systems-with-single-impeller","title":"Davey CS40125-1.5S Stainless Steel Centrifugal Pump for Washdown Systems with Single Impeller","description":"\u003cp\u003eDesigned for clean water duties where hygiene and corrosion resistance are important, the Davey CS40125-1.5S is suited to applications such as washdown systems, food-related processes, and smaller operational setups requiring consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers flow up to approximately 540 L\/Min and operates at a maximum head of around 20 m based on the performance curve. This allows reliable operation across systems where higher flow and moderate pressure are required for effective distribution.\u003c\/p\u003e\n\n\u003cp\u003eIts design follows a single stage end suction centrifugal configuration built to DIN (EN733) standards. The casing and impeller are manufactured from pressed stainless steel, providing durability and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor supports efficient maintenance and reduced downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736230858999,"sku":"CS40125-1.5S","price":2952.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40125-1-5s-stainless-steel-centrifugal-pump-for-washdown-systems-with-single-impeller.png?v=1777864202"},{"product_id":"davey-hm60-06-stainless-steel-multistage-centrifugal-pump-for-pressure-boosting-with-closed-impeller","title":"Davey HM60-06 Stainless Steel Multistage Centrifugal Pump for Pressure Boosting with Closed Impeller","description":"\u003cp\u003eThe Davey HM60-06 horizontal multistage centrifugal pump is designed for clean water supply, pressure boosting, irrigation, and transfer applications. It is suitable for residential, agricultural, and commercial systems where stable pressure and efficient performance are required.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 80 L\/Min and develops pressure up to approx. 45 m head. The multistage design allows the pump to generate higher pressure while maintaining smooth and consistent water delivery across varying operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe pump is constructed entirely with stainless steel hydraulic components, including casing, impellers, and stage assemblies. The closed multistage impeller design improves efficiency, reduces internal losses, and ensures reliable long-term performance in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.58 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures dependable operation, while built-in thermal overload protection provides safety during continuous use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact design for easy installation\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736231743735,"sku":"HM60-06","price":1120.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm60-06-304-stainless-steel-multistage-centrifugal-pump-pressure-boosting-systems-closed-multistage-impeller.png?v=1777864685"},{"product_id":"davey-cs40125-2-2s-stainless-steel-centrifugal-pump-for-cooling-water-circulation-with-single-impeller","title":"Davey CS40125-2.2S Stainless Steel Centrifugal Pump for Cooling Water Circulation with Single Impeller","description":"\u003cp\u003eBuilt for systems requiring consistent flow across temperature-controlled processes, the Davey CS40125-2.2S is suited to applications such as cooling water circulation, washdown operations, and smaller process-based installations where reliability is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers flow up to approximately 660 L\/Min and operates at a maximum head of around 25 m based on the performance curve. This provides stable performance across duty points where higher flow and moderate pressure are required for efficient system operation.\u003c\/p\u003e\n\n\u003cp\u003eIts construction follows a single stage end suction centrifugal design built to DIN (EN733) standards. The casing and impeller are manufactured from pressed stainless steel, providing durability and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor supports efficient maintenance and reduced downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736231809271,"sku":"CS40125-2.2S","price":3193.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40125-2-2s-stainless-steel-centrifugal-pump-for-cooling-water-circulation-with-single-impeller.png?v=1777865030"},{"product_id":"davey-hm60-08-stainless-steel-multistage-centrifugal-pump-for-pressure-boosting-with-closed-impeller","title":"Davey HM60-08 Stainless Steel Multistage Centrifugal Pump for Pressure Boosting with Closed Impeller","description":"\u003cp\u003eThe Davey HM60-08 horizontal multistage centrifugal pump is designed for clean water supply, pressure boosting, irrigation, and transfer applications. It is suitable for residential, agricultural, and commercial systems where higher pressure performance is required compared to lower stage models.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 80 L\/Min and develops pressure up to approx. 56 m head. The additional stages improve pressure capability while maintaining stable and efficient water delivery across operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe pump features fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design ensures high efficiency, reduced internal losses, and long service life in clean liquid applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.72 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the unit during continuous duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact and easy installation design\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736231874807,"sku":"HM60-08","price":1280.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm60-08-304-stainless-steel-multistage-centrifugal-pump-pressure-boosting-systems-closed-multistage-impeller.png?v=1777865248"},{"product_id":"davey-cs32125-1-1-3s-stainless-steel-centrifugal-pump-for-clean-water-supply-with-single-impeller","title":"Davey CS32125-1.1\/3S Stainless Steel Centrifugal Pump for Clean Water Supply with Single Impeller","description":"\u003cp\u003eDesigned for clean water duties requiring reliable and corrosion-resistant construction, the Davey CS32125-1.1\/3S is suited to applications such as washdown operations, treated water transfer, and smaller process-based installations where consistent performance is required.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers flow up to approximately 270 L\/Min and operates at a maximum head of around 24 m based on the performance curve. This allows stable operation across systems where moderate flow and pressure are required for effective distribution.\u003c\/p\u003e\n\n\u003cp\u003eIts construction follows a single stage end suction centrifugal design built to DIN (EN733) standards. The casing and impeller are manufactured from pressed stainless steel, providing durability and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor enables efficient maintenance and reduced downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736233545975,"sku":"CS32125-1.1\/3S","price":2035.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32125-1-1-3s-stainless-steel-centrifugal-pump-for-clean-water-systems-with-single-impeller.png?v=1777869568"},{"product_id":"davey-hm60-10-stainless-steel-multistage-centrifugal-pump-for-high-pressure-boosting-with-closed-impeller","title":"Davey HM60-10 Stainless Steel Multistage Centrifugal Pump for High Pressure Boosting with Closed Impeller","description":"\u003cp\u003eThe Davey HM60-10 horizontal multistage centrifugal pump is designed for clean water supply, high pressure boosting, irrigation systems, and commercial water transfer applications. It is ideal for installations requiring higher pressure performance compared to lower stage models.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 80 L\/Min and develops pressure up to approx. 68 m head. The additional stages enhance pressure output while maintaining smooth and efficient water delivery.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic design including casing, impellers, and stage assemblies. The closed multistage impeller construction ensures high efficiency, reduced energy loss, and long-term durability in clean liquid applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.94 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact and easy installation design\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736233578743,"sku":"HM60-10","price":1530.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm60-10-304-stainless-steel-multistage-centrifugal-pump-pressure-boosting-systems-closed-multistage-impeller.png?v=1777865611"},{"product_id":"davey-cs32160-1-5-3s-stainless-steel-centrifugal-pump-for-chiller-water-systems-with-single-impeller","title":"Davey CS32160-1.5\/3S Stainless Steel Centrifugal Pump for Chiller Water Systems with Single Impeller","description":"\u003cp\u003eDesigned for installations requiring consistent circulation of temperature-controlled fluids, the Davey CS32160-1.5\/3S is suited to applications such as chiller water systems, washdown operations, and smaller process-based installations where reliable flow is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers flow up to approximately 312 L\/Min, based on a performance point of 5.2 L\/sec, and operates at a maximum head of around 29 m as indicated by the performance curve. This allows stable operation across duty points where both flow and moderate pressure are required.\u003c\/p\u003e\n\n\u003cp\u003eIts construction follows a single stage end suction centrifugal design built to DIN (EN733) standards. The casing and impeller are manufactured from pressed stainless steel, providing corrosion resistance and suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor enables efficient maintenance and reduced downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressed stainless steel construction for clean water applications\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal (-20°C to +110°C capability)\u003c\/li\u003e\n\u003cli\u003eDIN (EN733) standard design with companion flanges\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for simplified servicing\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for easy maintenance\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute design for hydraulic performance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736236658935,"sku":"CS32160-1.5\/3S","price":2214.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32160-1-5-3s-stainless-steel-centrifugal-pump-for-chiller-water-systems-with-single-impeller.png?v=1777866436"},{"product_id":"davey-cs32160-2-2-3s-stainless-steel-centrifugal-pump-for-treated-water-systems-with-single-impeller","title":"Davey CS32160-2.2\/3S Stainless Steel Centrifugal Pump for Treated Water Systems with Single Impeller","description":"\u003cp\u003eSuited to applications requiring stable delivery of clean and conditioned water, the Davey CS32160-2.2\/3S is commonly used across process water systems, chiller circuits, and smaller industrial installations where consistent operation is required.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to 300 L\/Min, based on a performance point of 5.0 L\/sec, and operates to a maximum head of approximately 29 m according to the hydraulic curve. This allows it to maintain balanced performance across varying system demands without excessive pressure fluctuation.\u003c\/p\u003e\n\n\u003cp\u003eBuilt to DIN (EN733) standards, the pump uses a single stage end suction centrifugal design. The pressed stainless steel casing and impeller provide corrosion resistance, making it suitable for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit is equipped with a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disturbing pipework, while the replaceable stub shaft motor supports efficient maintenance of internal components.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for maintenance without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified servicing\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring for improved hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent flow performance\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMounted on a stainless steel base for structural durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736237314295,"sku":"CS32160-2.2\/3S","price":2129.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32160-2-2-3s-stainless-steel-centrifugal-pump-for-treated-water-systems-with-single-impeller.png?v=1777866702"},{"product_id":"davey-hm90-08-stainless-steel-high-pressure-multistage-pump-for-water-transfer-with-closed-impeller","title":"Davey HM90-08 Stainless Steel Multistage Centrifugal Pump for Water Transfer with Closed Impeller","description":"\u003cp\u003eThe Davey HM90-08 horizontal multistage centrifugal pump is designed for clean water supply, irrigation, pressure boosting, and transfer applications. It is suitable for residential, agricultural, and commercial installations requiring higher flow and stable pressure performance.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 130 L\/Min and develops pressure up to approx. 45 m head. The multistage configuration enables efficient pressure generation while maintaining smooth and consistent water delivery.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic design including casing, impellers, and stage assemblies. The closed multistage impeller system enhances efficiency, reduces internal wear, and ensures long-term durability in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 0.78 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection provides safe and continuous performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact and easy installation design\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736242655479,"sku":"HM90-08","price":1435.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm90-08-304-stainless-steel-multistage-centrifugal-pump-pressure-boosting.png?v=1777867799"},{"product_id":"davey-cs32200-3-0-3s-stainless-steel-centrifugal-pump-for-dairy-washdown-with-single-impeller","title":"Davey CS32200-3.0\/3S Stainless Steel Centrifugal Pump for Dairy Washdown with Single Impeller","description":"\u003cp\u003eFor operations where cleanliness, reliability, and steady pressure are essential, the Davey CS32200-3.0\/3S is commonly applied in dairy washdown systems and hygiene-focused environments. Its construction and performance characteristics allow it to handle continuous duty conditions where consistent delivery is required.\u003c\/p\u003e\n\n\u003cp\u003eWith the ability to produce up to approximately 380 L\/Min and reach a maximum head of around 45 m, the pump is suited to systems that demand stronger pressure while maintaining stable flow across varying operating points.\u003c\/p\u003e\n\n\u003cp\u003eThe unit is built around a DIN (EN733) end suction centrifugal design, using pressed stainless steel for both the casing and impeller. This material selection supports resistance to corrosion and ensures compatibility with clean water and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eA high temperature mechanical seal enables operation with liquid temperatures ranging from -20°C to +110°C. Maintenance is simplified through a back pull-out arrangement, allowing internal servicing without pipe removal, while the replaceable stub shaft motor supports efficient long-term upkeep.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) compliant end suction pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design enabling maintenance without pipe disturbance\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified servicing\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent flow characteristics\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMounted on stainless steel base for durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736242688247,"sku":"CS32200-3.0\/3S","price":2809.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32200-3-0-3s-stainless-steel-centrifugal-pump-for-dairy-washdown-systems-with-single-impeller.png?v=1777868172"},{"product_id":"davey-hm90-11-stainless-steel-multistage-centrifugal-pump-for-pressure-boosting-with-closed-impeller","title":"Davey HM90-11 Stainless Steel Multistage Centrifugal Pump for Pressure Boosting with Closed Impeller","description":"\u003cp\u003eThe Davey HM90-11 horizontal multistage centrifugal pump is designed for clean water supply, irrigation, pressure boosting, and transfer applications. It is suitable for residential, agricultural, and commercial installations requiring higher pressure performance with stable flow.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 130 L\/Min and develops pressure up to approx. 58 m head. The additional stages allow the pump to generate higher pressure while maintaining efficient and smooth water delivery.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic design including casing, impellers, and stage assemblies. The closed multistage impeller construction ensures high efficiency, reduced internal losses, and long service life in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.05 kW motor operating on 220–240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact and easy installation design\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736248455415,"sku":"HM90-11","price":1630.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm90-11-304-stainless-steel-multistage-centrifugal-pump-pressure-boosting.png?v=1777868920"},{"product_id":"davey-cs32200-4-0-3s-stainless-steel-centrifugal-pump-for-high-pressure-washdown-with-single-impeller","title":"Davey CS32200-4.0\/3S Stainless Steel Centrifugal Pump for High Pressure Washdown with Single Impeller","description":"\u003cp\u003eWhere stronger pressure output is required for cleaning and fluid handling tasks, the Davey CS32200-4.0\/3S provides a dependable solution. It is commonly used in high pressure washdown systems and demanding environments where consistent delivery is critical for operational efficiency.\u003c\/p\u003e\n\n\u003cp\u003eCapable of delivering up to approximately 400 L\/Min and reaching a maximum head of around 55 m, the pump supports applications that require higher pressure while maintaining steady flow across varying demand conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe design is based on a DIN (EN733) end suction centrifugal configuration, utilising pressed stainless steel for both the casing and impeller. This construction enhances durability and provides resistance against corrosion when handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eEquipped with a high temperature mechanical seal, the pump can handle liquid temperatures from -20°C to +110°C. Maintenance access is simplified through a back pull-out design, allowing internal servicing without disconnecting pipework, while the replaceable stub shaft motor supports long-term serviceability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe removal\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent hydraulic performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for structural durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736248488183,"sku":"CS32200-4.0\/3S","price":2911.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs32200-4-0-3s-stainless-steel-centrifugal-pump-for-high-pressure-washdown-with-single-impeller.png?v=1777868865"},{"product_id":"davey-cs40125-1-5-3s-stainless-steel-centrifugal-pump-for-bulk-water-transfer-with-single-impeller","title":"Davey CS40125-1.5\/3S Stainless Steel Centrifugal Pump for Bulk Water Transfer with Single Impeller","description":"\u003cp\u003eWhen applications demand higher flow delivery rather than elevated pressure, the Davey CS40125-1.5\/3S provides a dependable solution. It is well suited to bulk water transfer duties across washdown operations, fluid movement systems, and smaller industrial setups where volume is the primary requirement.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to approximately 540 L\/Min and operates at a maximum head of around 20 m based on the hydraulic performance curve. This makes it ideal for installations where steady high flow is required with moderate pressure conditions.\u003c\/p\u003e\n\n\u003cp\u003eIts construction follows a DIN (EN733) end suction centrifugal design, incorporating a pressed stainless steel casing and impeller. This configuration offers corrosion resistance and ensures suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit is equipped with a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. Maintenance is simplified through a back pull-out design, allowing servicing without disconnecting pipework, while the replaceable stub shaft motor supports long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent hydraulic performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736250749175,"sku":"CS40125-1.5\/3S","price":2188.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40125-1-5-3s-stainless-steel-centrifugal-pump-for-bulk-water-transfer-with-single-impeller.png?v=1777869118"},{"product_id":"davey-hm90-13-stainless-steel-multistage-pump-for-elevated-water-supply-with-closed-impeller","title":"Davey HM90-13 Stainless Steel Multistage Centrifugal Pump for Elevated Water Supply with Closed Impeller","description":"\u003cp\u003eThe Davey HM90-13 horizontal multistage centrifugal pump is designed for clean water supply, irrigation systems, high pressure boosting, and transfer applications. It is suitable for residential, agricultural, and commercial installations requiring strong pressure performance with stable flow.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of approximately 130 L\/Min and develops pressure up to around 68 m head. The higher number of stages enables the pump to generate increased pressure while maintaining efficient and consistent water delivery.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design improves efficiency, reduces internal losses, and ensures long service life in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.40 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP55 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eCompact and easy installation design\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP55 enclosure\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736252190967,"sku":"HM90-13","price":1760.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm90-13-304-stainless-steel-multistage-centrifugal-pump-high-pressure-boosting.png?v=1777869432"},{"product_id":"davey-cs40125-2-2-3s-stainless-steel-centrifugal-pump-for-tank-filling-systems-with-single-impeller","title":"Davey CS40125-2.2\/3S Stainless Steel Centrifugal Pump for Tank Filling Systems with Single Impeller","description":"\u003cp\u003eWhere rapid movement of clean water is required across storage or distribution points, the Davey CS40125-2.2\/3S offers a dependable solution. It is particularly suited to tank filling systems, fluid transfer setups, and installations where maintaining strong flow rates is more critical than high pressure.\u003c\/p\u003e\n\u003cp\u003eDelivering up to approximately 660 L\/Min with a maximum head of around 25 m, the pump supports applications that require high volume throughput while maintaining stable and consistent performance across operating conditions.\u003c\/p\u003e\n\u003cp\u003eBuilt to DIN (EN733) standards, the pump features a single stage end suction centrifugal design. Its pressed stainless-steel casing and impeller provide corrosion resistance and durability when handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\u003cp\u003eThe unit is equipped with a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out configuration enables servicing without removing pipework, while the replaceable stub shaft motor simplifies maintenance over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent flow performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736252387575,"sku":"CS40125-2.2\/3S","price":2261.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40125-2-2-3s-stainless-steel-centrifugal-pump-for-tank-filling-systems-with-single-impeller.png?v=1777869414"},{"product_id":"davey-cs40160-3-0-3s-stainless-steel-centrifugal-pump-for-distribution-systems-with-single-impeller","title":"Davey CS40160-3.0\/3S Stainless Steel Centrifugal Pump for Distribution Systems with Single Impeller","description":"\u003cp\u003eFor installations where both flow capacity and delivery pressure need to be balanced, the Davey CS40160-3.0\/3S provides a reliable solution. It is well suited to distribution systems, washdown operations, and process environments where steady performance is required across varying demand conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to approximately 730 L\/Min and operates at a maximum head of around 33 m based on the performance curve. This combination allows it to maintain consistent output where higher flow rates must be supported alongside moderate pressure requirements.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to DIN (EN733) standards, the pump features a single stage end suction centrifugal design. The pressed stainless steel casing and impeller provide corrosion resistance and ensure suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eA high temperature mechanical seal enables operation with liquid temperatures from -20°C to +110°C. The back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor simplifies maintenance and reduces downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for maintenance without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified servicing\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent flow performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736254681335,"sku":"CS40160-3.0\/3S","price":2618.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40160-3-0-3s-stainless-steel-centrifugal-pump-for-distribution-systems-with-single-impeller.png?v=1777870265"},{"product_id":"davey-cs40160-4-0-3s-stainless-steel-centrifugal-pump-for-high-flow-distribution-with-single-impeller","title":"Davey CS40160-4.0\/3S Stainless Steel Centrifugal Pump for High Flow Distribution with Single Impeller","description":"\u003cp\u003eWhen systems demand increased flow capacity along with consistent delivery pressure, the Davey CS40160-4.0\/3S provides a balanced solution. It is well suited to high flow distribution duties, washdown environments, and process systems where reliable output is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is capable of delivering up to approximately 830 L\/Min while reaching a maximum head of around 39 m. This performance range supports applications where higher throughput is required without compromising on pressure stability.\u003c\/p\u003e\n\n\u003cp\u003eBuilt in accordance with DIN (EN733) standards, the pump features a single stage end suction centrifugal configuration. The pressed stainless steel casing and impeller offer corrosion resistance and durability for handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eA high temperature mechanical seal allows operation with liquid temperatures from -20°C to +110°C. Maintenance is simplified through a back pull-out design, enabling servicing without disturbing pipework, while the replaceable stub shaft motor supports efficient long-term operation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent flow characteristics\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736262217975,"sku":"CS40160-4.0\/3S","price":2669.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40160-4-0-3s-stainless-steel-centrifugal-pump-for-high-flow-distribution-with-single-impeller.png?v=1777870632"},{"product_id":"davey-hm160-15-stainless-steel-multistage-centrifugal-pump-for-tank-filling-with-closed-impeller","title":"Davey HM160-15 Stainless Steel Multistage Centrifugal Pump for Tank Filling with Closed Impeller","description":"\u003cp\u003eThe Davey HM160-15 horizontal multistage centrifugal pump is designed for clean water supply, irrigation, tank filling, and high flow transfer applications. It is suitable for agricultural, commercial, and industrial installations where large volume water delivery is required.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 250 L\/Min and develops pressure up to approximately 47 m head, making it ideal for applications requiring high flow with moderate pressure performance.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design ensures efficient operation, reduced internal losses, and long service life in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.50 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP56 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eHigh flow performance for large volume transfer\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736263135479,"sku":"HM160-15","price":1950.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm160-15-304-stainless-steel-multistage-centrifugal-pump-high-volume-water-supply.png?v=1777871200"},{"product_id":"davey-cs40200-5-5-3s-stainless-steel-centrifugal-pump-for-pressure-boosting-systems-with-single-impeller","title":"Davey CS40200-5.5\/3S Stainless Steel Centrifugal Pump for Pressure Boosting Systems with Single Impeller","description":"\u003cp\u003eDesigned for applications where higher discharge pressure is required alongside dependable flow delivery, the Davey CS40200-5.5\/3S is suited to pressure boosting systems, washdown operations, and demanding process environments.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is capable of delivering up to approximately 780 L\/Min and developing a maximum head of around 46 m. This performance profile supports installations where maintaining pressure stability is critical while still handling substantial flow requirements.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to DIN (EN733) standards, the pump features a single stage end suction centrifugal design. The pressed stainless steel casing and impeller provide durability and corrosion resistance, ensuring suitability for clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal allowing operation with liquid temperatures from -20°C to +110°C. Maintenance access is simplified through a back pull-out design, enabling servicing without removing pipework, while the replaceable stub shaft motor supports efficient upkeep.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for stable hydraulic performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736265396471,"sku":"CS40200-5.5\/3S","price":3557.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs40200-5-5-3s-stainless-steel-centrifugal-pump-for-pressure-boosting-systems-with-single-impeller.png?v=1777871267"},{"product_id":"davey-hm160-19-stainless-steel-multistage-centrifugal-pump-for-bulk-transfer-with-closed-impeller","title":"Davey HM160-19 Stainless Steel Multistage Centrifugal Pump for Bulk Transfer with Closed Impeller","description":"\u003cp\u003eThe Davey HM160-19 horizontal multistage centrifugal pump is designed for clean water supply, tank filling, water distribution, and bulk transfer applications. It is suitable for agricultural, commercial, and industrial installations where high volume flow with stable pressure is required.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 250 L\/Min and develops pressure up to approximately 59 m head, making it ideal for systems that require both strong delivery capacity and reliable lifting performance.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design improves efficiency, minimizes internal losses, and ensures long service life in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.80 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP56 protection and Class F insulation ensures reliable performance, while built-in thermal overload protection safeguards the pump during continuous duty operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eHigh flow performance for large volume applications\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736266412279,"sku":"HM160-19","price":2100.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm160-19-304-stainless-steel-multistage-centrifugal-pump-tank-filling-systems.png?v=1777871604"},{"product_id":"davey-cs40200-7-5-3s-stainless-steel-centrifugal-pump-for-high-head-systems-with-single-impeller","title":"Davey CS40200-7.5\/3S Stainless Steel Centrifugal Pump for High Head Systems with Single Impeller","description":"\u003cp\u003eFor installations where higher discharge pressure is a key requirement, the Davey CS40200-7.5\/3S is configured to deliver consistent output across demanding operating conditions. It is commonly applied in high head systems, washdown operations, and industrial setups where elevated pressure performance is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to approximately 900 L\/Min and develops a maximum head of around 56 m. This operating range makes it suitable for applications that require both strong pressure capability and reliable flow delivery under varying demand conditions.\u003c\/p\u003e\n\n\u003cp\u003eDesigned to DIN (EN733) standards, the unit utilises a single stage end suction centrifugal configuration. The pressed stainless steel casing and impeller provide corrosion resistance and durability when handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eA high temperature mechanical seal allows operation with liquid temperatures from -20°C to +110°C. The back pull-out design enables maintenance without disconnecting pipework, while the replaceable stub shaft motor supports efficient servicing and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for stable performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736266674423,"sku":"CS40200-7.5\/3S","price":3689.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/CS-seriesSuctionPump.png?v=1777871751"},{"product_id":"davey-hm270-19-stainless-steel-multistage-centrifugal-pump-for-reservoir-filling-with-closed-impeller","title":"Davey HM270-19 Stainless Steel Multistage Centrifugal Pump for Reservoir Filling with Closed Impeller","description":"\u003cp\u003eThe Davey HM270-19 horizontal multistage centrifugal pump is designed for clean water supply, bulk transfer, reservoir filling, and irrigation network applications. It is suitable for agricultural, commercial, and industrial installations requiring very high flow delivery with stable pressure performance.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 400 L\/Min and develops pressure up to approximately 37 m head, making it ideal for high volume applications where consistent flow is more critical than high pressure.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design improves efficiency, reduces internal losses, and ensures long-term durability in clean water applications.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 1.90 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP56 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eHigh flow design for large volume water movement\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736272113911,"sku":"HM270-19","price":2230.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm270-19-304-stainless-steel-multistage-centrifugal-pump-bulk-water-transfer.png?v=1777872789"},{"product_id":"davey-cs50125-3-0-3s-stainless-steel-centrifugal-pump-for-high-volume-transfer-with-single-impeller","title":"Davey CS50125-3.0\/3S Stainless Steel Centrifugal Pump for High Volume Transfer with Single Impeller","description":"\u003cp\u003eDesigned for applications where moving large volumes of clean water efficiently is the primary requirement, the Davey CS50125-3.0\/3S is well suited to high volume transfer duties across washdown operations, storage movement systems, and industrial processes.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is capable of delivering up to approximately 1140 L\/Min while operating at a maximum head of around 23 m. This performance profile supports installations that prioritise flow capacity over pressure while maintaining stable and continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eBuilt in accordance with DIN (EN733) standards, the pump utilises a single stage end suction centrifugal configuration. The pressed stainless steel casing and impeller provide durability and corrosion resistance for handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe unit incorporates a high temperature mechanical seal allowing operation with liquid temperatures from -20°C to +110°C. A back pull-out design enables servicing without disconnecting pipework, while the replaceable stub shaft motor supports efficient maintenance and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for consistent performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736272670967,"sku":"CS50125-3.0\/3S","price":2673.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs50125-3-0-3s-stainless-steel-centrifugal-pump-for-high-volume-transfer-with-single-impeller.png?v=1777872683"},{"product_id":"davey-cs50125-4-0-3s-stainless-steel-centrifugal-pump-for-rapid-tank-transfer-with-single-impeller","title":"Davey CS50125-4.0\/3S Stainless Steel Centrifugal Pump for Rapid Tank Transfer with Single Impeller","description":"\u003cp\u003eWhere quick movement of large volumes is required between storage points, the Davey CS50125-4.0\/3S delivers dependable performance. It is commonly applied in rapid tank transfer, washdown processes, and industrial systems where maintaining strong flow is essential for operational efficiency.\u003c\/p\u003e\n\n\u003cp\u003eThe pump provides up to approximately 1260 L\/Min while reaching a maximum head of around 26 m. This operating range supports applications that prioritise high throughput while maintaining stable delivery under moderate pressure conditions.\u003c\/p\u003e\n\n\u003cp\u003eEngineered to DIN (EN733) standards, the unit features a single stage end suction centrifugal design. The pressed stainless steel casing and impeller ensure durability and corrosion resistance when handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is equipped with a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out configuration allows servicing without disturbing pipework, while the replaceable stub shaft motor supports efficient long-term maintenance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for stable flow characteristics\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736279388407,"sku":"CS50125-4.0\/3S","price":2749.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs50125-4-0-3s-stainless-steel-centrifugal-pump-for-rapid-tank-transfer-with-single-impeller.png?v=1777872962"},{"product_id":"davey-hm270-25-stainless-steel-multistage-centrifugal-pump-for-dam-transfer-with-closed-impeller","title":"Davey HM270-25 Stainless Steel Multistage Centrifugal Pump for Dam Transfer with Closed Impeller","description":"\u003cp\u003eThe Davey HM270-25 horizontal multistage centrifugal pump is designed for high capacity water supply, large scale irrigation, dam transfer, and bulk water movement applications. It is suitable for agricultural, industrial, and commercial installations requiring very high flow with stable pressure performance.\u003c\/p\u003e\n\u003cp\u003eThis model delivers a maximum flow of 425 L\/Min and develops pressure up to approximately 46 m head, making it ideal for large volume applications where consistent delivery and moderate pressure are required.\u003c\/p\u003e\n\u003cp\u003eThe pump features a fully stainless steel hydraulic construction including casing, impellers, and stage assemblies. The closed multistage impeller design ensures efficient performance, reduced internal losses, and long service life in clean water environments.\u003c\/p\u003e\n\u003cp\u003eIt is powered by a 2.50 kW motor operating on 240V supply at 2900 rpm. The TEFC motor with IP56 protection and Class F insulation ensures reliable operation, while built-in thermal overload protection safeguards the pump during continuous duty use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal multistage centrifugal pump design\u003c\/li\u003e\n\u003cli\u003eClosed multistage stainless steel impellers\u003c\/li\u003e\n\u003cli\u003e304 stainless steel casing and stage assemblies\u003c\/li\u003e\n\u003cli\u003e316L stainless steel pump shaft\u003c\/li\u003e\n\u003cli\u003eMechanical seal with carbon\/ceramic faces and EPDM elastomers\u003c\/li\u003e\n\u003cli\u003eAxial suction with vertical discharge configuration\u003c\/li\u003e\n\u003cli\u003eVery high flow capacity for large volume applications\u003c\/li\u003e\n\u003cli\u003eTEFC motor with IP56 protection\u003c\/li\u003e\n\u003cli\u003eClass F insulation with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eSuitable for clean, non-corrosive liquids\u003c\/li\u003e\n\u003cli\u003eOperating liquid temperature: -15°C to 105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736279486711,"sku":"HM270-25","price":2485.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-hm270-25-304-stainless-steel-multistage-centrifugal-pump-high-volume-water-distribution.png?v=1777873098"},{"product_id":"davey-cs50160-5-5-3s-stainless-steel-centrifugal-pump-for-high-capacity-circulation-with-single-impeller","title":"Davey CS50160-5.5\/3S Stainless Steel Centrifugal Pump for High-Capacity Circulation with Single Impeller","description":"\u003cp\u003eBuilt to handle demanding flow requirements, the Davey CS50160-5.5\/3S is suited to applications where large volumes of clean water need to be moved efficiently. It is commonly applied in high capacity circulation systems, washdown operations, and industrial setups where consistent delivery is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe pump delivers up to approximately 1380 L\/Min and develops a maximum head of around 35 m. This performance combination allows it to operate effectively in systems that require strong flow output while maintaining stable pressure conditions.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to DIN (EN733) standards, the unit features a single stage end suction centrifugal configuration. The pressed stainless steel casing and impeller provide corrosion resistance and durability for handling clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is equipped with a high temperature mechanical seal capable of handling liquid temperatures from -20°C to +110°C. A back pull-out design allows servicing without disconnecting pipework, while the replaceable stub shaft motor supports efficient maintenance over time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDIN (EN733) end suction centrifugal pump configuration\u003c\/li\u003e\n\u003cli\u003eBack pull-out design for servicing without pipe disconnection\u003c\/li\u003e\n\u003cli\u003eReplaceable stub shaft motor for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eHigh temperature mechanical seal for extended operating range\u003c\/li\u003e\n\u003cli\u003ePatented floating neck ring improving hydraulic efficiency\u003c\/li\u003e\n\u003cli\u003e360° flared volute for stable flow performance\u003c\/li\u003e\n\u003cli\u003ePressed stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStainless steel base for durability and structural strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736280830199,"sku":"CS50160-5.5\/3S","price":3506.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs50160-5-5-3s-stainless-steel-centrifugal-pump-for-high-capacity-circulation-with-single-impeller.png?v=1777873690"},{"product_id":"davey-cs50160-7-5-3s-stainless-steel-centrifugal-pump-for-pressure-circulation-with-single-impeller","title":"Davey CS50160-7.5\/3S Stainless Steel Centrifugal Pump for Pressure Circulation with Single Impeller","description":"\u003cp\u003eHandling large volumes while maintaining steady delivery requires a pump that balances output and durability, and the Davey CS50160-7.5\/3S is configured for exactly that. It fits well into pressure-driven circulation setups, washdown environments, and demanding industrial operations where consistent performance is critical.\u003c\/p\u003e\n\n\u003cp\u003eWith a maximum flow of approximately 1310 L\/Min and a head capability of around 40 m, this model supports systems that require both strong throughput and stable pressure. Its performance range allows it to operate efficiently across varying demand conditions without compromising output.\u003c\/p\u003e\n\n\u003cp\u003eAt its core is a single stage end suction centrifugal configuration developed in line with DIN (EN733) standards. The use of pressed stainless steel for the casing and impeller provides corrosion resistance and ensures compatibility with clean and temperature-sensitive liquids.\u003c\/p\u003e\n\n\u003cp\u003eOperation across a wide temperature range is supported by a high temperature mechanical seal rated from -20°C to +110°C. Servicing is simplified through a back pull-out arrangement, allowing internal access without disturbing pipework, while the replaceable stub shaft motor helps maintain long-term serviceability.\u003c\/p\u003e","brand":"Davey","offers":[{"title":"Default Title","offer_id":50736286695671,"sku":"CS50160-7.5\/3S","price":3710.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/davey-cs50160-7-5-3s-stainless-steel-centrifugal-pump-for-pressure-circulation-systems-with-single-impeller.png?v=1777874141"}],"url":"https:\/\/foundationpumps.com.au\/collections\/davey-centrifugal-pumps.oembed?page=2","provider":"Foundation Pumps","version":"1.0","type":"link"}