{"title":"Enviroswim Pool Pumps","description":"\u003cp\u003eEnviroswim Pool Pumps are designed to work seamlessly with chemical-free and low-chemical pool systems, delivering efficient water circulation and reliable performance. Known for supporting healthier pool environments, Enviroswim pumps are ideal for residential pools focused on clean, natural water treatment.\u003c\/p\u003e\n\u003cp\u003eThe range includes energy-efficient pool pumps suited for filtration and circulation, helping maintain crystal clear water while reducing reliance on traditional chemicals. Built for quiet operation and long-term durability, Enviroswim pumps are a smart choice for modern pool systems.\u003c\/p\u003e\n\u003cp\u003eShop Enviroswim pool pumps online with Australia-wide delivery and expert support.\u003c\/p\u003e","products":[{"product_id":"enviroswim-es3-freshwater-pool-sanitisation-system","title":"Enviroswim ES3 Freshwater Pool Sanitisation System","description":"\u003cp\u003eThe Enviroswim ES3 is an advanced freshwater pool sanitisation system designed to maintain clean and safe swimming pool water with minimal chemical use. Unlike traditional chlorine or saltwater systems, the ES3 uses a combination of electronic oxidation, ultrasonic treatment and mineral ionisation (copper and silver ions) to sanitise pool water while maintaining a freshwater swimming experience.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to sanitise swimming pools up to approximately 100,000 litres and works by producing low levels of oxidisers and natural mineral ions that eliminate bacteria, algae and other contaminants in the water. It operates in conjunction with the pool filtration pump and must only run when water is flowing through the wet cell to ensure safe and effective sanitisation.\u003c\/p\u003e\n\u003cp\u003eA key advantage of the ES3 system is its freshwater operating range, which requires a total dissolved solids (TDS) level of about 1,000–1,500 ppm, significantly lower than traditional saltwater chlorination systems. This results in softer water that is gentler on skin, eyes and pool surfaces.\u003c\/p\u003e\n\u003cp\u003eThe ES3 includes a wall-mounted electronic control unit, oxidiser\/ioniser wet cell assembly, ultrasonic chamber and copper test kit. The system typically runs around 1 hour per 10,000 litres of pool water per day during the swimming season to maintain sanitisation levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFreshwater pool sanitisation system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for swimming pools up to 100,000 L\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectronic oxidising system for water sanitisation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic chamber to enhance water treatment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper and silver ionisation electrodes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow chemical requirement compared with chlorine systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with existing pool filtration pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for freshwater pool environments (TDS 1,000–1,500 ppm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWall-mounted electronic control unit with timer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes wet cell, ultrasonic chamber and copper test kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50559753945335,"sku":"ES3","price":4000.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimES3FreshwaterPoolSanitisationSystem_05a5a5c9-bbb6-4cf1-9f26-878cbb137682.png?v=1773039382"},{"product_id":"enviroswim-es3-freshwater-pool-sanitisation-system-with-wifi-timer","title":"Enviroswim ES3 Freshwater Pool Sanitisation System with WiFi Timer","description":"\u003cp\u003eThe Enviroswim ES3 with WiFi Timer is an advanced freshwater pool sanitisation system designed to maintain clean and safe pool water with minimal chemical use. Instead of relying on traditional chlorine or salt chlorination, the system combines electronic oxidation, ultrasonic treatment and copper\/silver mineral ionisation to control bacteria, algae and contaminants while maintaining a natural freshwater swimming experience.\u003c\/p\u003e\n\u003cp\u003eThe system is suitable for swimming pools up to approximately 100,000 litres and operates alongside the pool filtration pump. For effective sanitisation, the system typically runs around 1 hour per 10,000 litres of pool water per day, allowing the oxidising and ionisation processes to treat the water as it circulates through the system.\u003c\/p\u003e\n\u003cp\u003eThe ES3 includes a wall-mounted control unit, oxidiser\/ioniser wet cell housing, ultrasonic chamber and copper test kit. The WiFi timer allows users to remotely schedule and control system operation through a mobile device, ensuring the sanitiser runs in sync with the pool pump and filtration schedule.\u003c\/p\u003e\n\u003cp\u003eUnlike saltwater chlorination systems, Enviroswim operates with freshwater parameters and requires a total dissolved solids (TDS) level of approximately 1,000–1,500 ppm, producing softer water that is gentler on skin, eyes and pool surfaces while maintaining effective sanitation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFreshwater pool sanitisation system with WiFi timer control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for swimming pools up to 100,000 L\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectronic oxidising system for water sanitation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic chamber to enhance water treatment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper and silver ionisation electrodes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiFi timer for remote scheduling and operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow chemical requirement compared with chlorine systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with existing pool filtration pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for freshwater pool environments (TDS 1,000–1,500 ppm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes control unit, wet cell housing, ultrasonic chamber and copper test kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560721780983,"sku":"ES3+WIFI","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimES3FreshwaterPoolSanitisationSystemwithWiFiTimer.png?v=1773065695"},{"product_id":"enviroswim-ultrasonics-v3-pool-water-sanitation-module","title":"Enviroswim Ultrasonics V3 Pool Water Sanitation Module","description":"\u003cp\u003eThe Enviroswim Ultrasonics V3 Module is a key component of the Enviroswim ES3 freshwater pool sanitisation system. It uses ultrasonic technology to assist with water treatment by improving the effectiveness of the oxidation and ionisation processes used to sanitise pool water. The module is installed inline with the pool return plumbing so that circulating water passes through the ultrasonic chamber during normal filtration operation.\u003c\/p\u003e\n\u003cp\u003eThe ultrasonic chamber works alongside the ES3 electronic oxidiser and copper\/silver ioniser system to maintain safe, clean swimming water with minimal chemical use. Ultrasonic waves help disrupt microorganisms and enhance the sanitising action within the water, supporting the overall treatment process while maintaining a freshwater swimming environment.\u003c\/p\u003e\n\u003cp\u003eThe V3 module operates automatically whenever the pool pump is running and water is flowing through the system. Proper water flow through the chamber is required to ensure the ultrasonic emitter and wet cell remain filled with water during operation.\u003c\/p\u003e\n\u003cp\u003eBecause it has no moving parts, the ultrasonic chamber requires little to no maintenance and is designed for long-term operation as part of the ES3 sanitising system. The system overall typically runs about 1 hour per 10,000 L of pool water per day to maintain sanitisation levels when used in a standard residential pool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltrasonic pool water sanitation module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Enviroswim ES3 sanitisation systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic emitter enhances sanitisation performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks alongside oxidiser and copper\/silver ionisation processes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInline installation on pool return line\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaintenance-free ultrasonic chamber design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates automatically with pool pump circulation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for freshwater pool environments\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e40 mm \/ 50 mm PVC plumbing compatibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560728006903,"sku":"V3","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimUltrasonicsV3PoolWaterSanitationModule.png?v=1773065983"},{"product_id":"enviroswim-ultrasonics-post-14-pool-water-sanitation-module","title":"Enviroswim Ultrasonics Post 14 Pool Water Sanitation Module","description":"\u003cp\u003eThe Enviroswim Ultrasonics Post 14 Module is an inline ultrasonic water-treatment component designed for use with the Enviroswim ES3 freshwater pool sanitisation system. Installed in the pool return line, the module generates ultrasonic waves that enhance the system’s sanitising processes while water flows through the chamber during normal pump operation.\u003c\/p\u003e\n\u003cp\u003eThe ultrasonic module works together with the Enviroswim system’s electronic oxidiser and copper-silver ioniser. These combined technologies disinfect pool water by producing oxidising agents and releasing trace mineral ions that target bacteria, algae and organic contaminants. The ultrasonic element helps break down deposits and improves the effectiveness of the sanitisation process by physically disrupting contaminants in the circulating water.\u003c\/p\u003e\n\u003cp\u003eThe module contains an ultrasonic emitter inside a sealed PVC chamber and operates automatically whenever the filtration pump is running. Because the ultrasonic system has no moving parts, it is designed to be largely maintenance-free and can run continuously as part of the pool’s sanitation cycle.\u003c\/p\u003e\n\u003cp\u003eThe Ultrasonics Post 14 module is typically used in freshwater pool systems operating with total dissolved solids (TDS) around 1,000–1,500 ppm, which allows the Enviroswim system to maintain sanitation while avoiding the higher salinity levels required by saltwater chlorination systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltrasonic pool water sanitation module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for Enviroswim ES3 freshwater pool systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInline installation on pool return plumbing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnhances oxidation and ionisation sanitising processes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaintenance-free ultrasonic emitter chamber\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates automatically with pool pump circulation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelps disrupt microorganisms and mineral buildup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable PVC ultrasonic chamber housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with 40 mm \/ 50 mm pool plumbing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560736231671,"sku":"POST-14-MODULE","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimUltrasonicsPost14PoolWaterSanitationModule.png?v=1773066315"},{"product_id":"enviroswim-copper-test-kit-pool-water-quality-test-kit","title":"Enviroswim Copper Test Kit Pool Water Quality Test Kit","description":"\u003cp\u003eThe Enviroswim Copper Test Kit is a water-quality testing kit designed to measure copper ion levels in swimming pools using the Enviroswim freshwater sanitisation system. It is used to ensure that the copper concentration in pool water remains within the recommended operating range for effective sanitisation and safe swimming conditions.\u003c\/p\u003e\n\u003cp\u003eThe Enviroswim ES3 sanitising system releases trace copper and silver ions into the pool water as part of the ionisation process that controls algae and bacteria. The copper test kit allows pool owners to regularly monitor the copper level and adjust the ioniser output if required. The ideal copper concentration for proper system operation is typically around 0.2–0.4 ppm, and testing should be performed when the pool pH is within the recommended range (about 7.1–7.4) to ensure accurate readings.\u003c\/p\u003e\n\u003cp\u003eThe kit works using a colorimetric testing method. A small water sample is placed in a test vial and reagent drops are added. The water changes colour depending on the copper concentration, and the result is compared against a supplied colour chart to determine the copper level.\u003c\/p\u003e\n\u003cp\u003eTypical kit contents include reagents (buffer and indicator solutions), a test vial or cuvette, a colour comparison chart and instructions for use. These kits are simple to use and are designed for routine pool maintenance, helping ensure that the sanitising system operates correctly and that copper levels do not exceed recommended limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCopper ion water test kit for swimming pools\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for Enviroswim freshwater sanitisation systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMeasures copper concentration in pool water\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColour-comparison testing method for easy readings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelps maintain recommended copper levels (0.2–0.4 ppm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports correct operation of Enviroswim ionisation systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimple manual testing procedure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes reagents, test vial and colour chart\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560748945655,"sku":"COPPER-TEST-KIT","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimCopperTestKitPoolWaterQualityTestKit.png?v=1773066954"},{"product_id":"enviroswim-4-in-1-pool-water-test-kit","title":"Enviroswim 4-in-1 Pool Water Test Kit","description":"\u003cp\u003eThe Enviroswim 4-in-1 Pool Water Test Kit is a manual water-testing kit designed to monitor key chemical parameters in swimming pools and spas. Regular testing helps maintain balanced water conditions, ensuring safe swimming and protecting pool equipment from corrosion, scaling or chemical damage.\u003c\/p\u003e\n\u003cp\u003eThis reagent-based test kit allows pool owners to quickly check the four most important water balance indicators used in routine pool maintenance: pH level, chlorine or bromine concentration, acid demand and total alkalinity. These parameters help determine whether adjustments such as adding acid, buffers or sanitiser are required to keep the water within recommended operating ranges.\u003c\/p\u003e\n\u003cp\u003eThe kit uses a colour-comparison testing method. A small water sample from the pool is placed into the test vial, reagents are added, and the resulting colour change is compared with a supplied chart to determine the chemical level in the water. This simple testing process helps identify water balance issues early and maintain hygienic pool conditions.\u003c\/p\u003e\n\u003cp\u003eRoutine testing with a 4-in-1 kit is recommended as part of regular pool maintenance, as proper water balance improves sanitizer effectiveness and helps prevent algae growth, cloudy water and damage to pool surfaces or equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-in-1 pool and spa water test kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTests pH level, chlorine or bromine concentration, acid demand and total\u003c\/li\u003e\n\u003cli\u003ealkalinity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColour-comparison reagent testing method\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper pool water balance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports routine pool and spa maintenance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuick and easy manual testing procedure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for residential swimming pools and spas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes test vial, reagents and colour comparison chart\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560756842743,"sku":"POOL-TEST-KIT","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Enviroswim4-in-1PoolWaterTestKit.png?v=1773067432"},{"product_id":"enviroswim-semi-automatic-doser-ph-adjustment-dosing-system","title":"Enviroswim Semi-Automatic Doser pH Adjustment Dosing System","description":"\u003cp\u003eThe Enviroswim Semi-Automatic Doser is a pH adjustment dosing system designed to automatically add controlled amounts of acid to swimming pool water to maintain balanced pH levels. The unit works alongside the Enviroswim ES3 freshwater sanitisation system and the pool filtration pump, helping reduce manual chemical handling while maintaining stable water chemistry.\u003c\/p\u003e\n\u003cp\u003eThe dosing system injects hydrochloric acid (pH reducer) into the return line of the pool circulation system. Instead of manually adding chemicals to the pool, the doser gradually feeds diluted acid into the water, helping maintain balanced pH and improving overall water quality. This controlled dosing helps minimise fluctuations in pool chemistry and can reduce chemical usage and maintenance effort.\u003c\/p\u003e\n\u003cp\u003eUnlike fully automatic dosing systems, the Enviroswim doser does not monitor pH levels directly. Instead, it runs whenever the Enviroswim system and pool equipment are operating. Users adjust the dosing rate manually via a dial on the pump to match the pool’s chemical demand.\u003c\/p\u003e\n\u003cp\u003eThe system uses a peristaltic dosing pump that draws diluted acid from a container through a suction tube and injects it into the pool return pipe via a discharge line. The flow rate can be adjusted from 0 to approximately 1.1 litres per hour, allowing the user to fine-tune chemical dosing according to pool size and conditions.\u003c\/p\u003e\n\u003cp\u003eTypical components included with the system are the dosing pump, mounting bracket, suction and discharge tubing, non-return valve, injection fitting and installation hardware. The doser is usually installed as the last device in the return line before water returns to the pool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-automatic pH adjustment dosing system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Enviroswim ES3 freshwater pool systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePeristaltic dosing pump for precise chemical injection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum dosing rate: 1.1 L per hour\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual flow-rate adjustment dial\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInjects diluted hydrochloric acid to maintain pH balance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates automatically when pool equipment is running\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces manual chemical handling and maintenance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInline installation on pool return plumbing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Enviroswim","offers":[{"title":"Default Title","offer_id":50560769687799,"sku":"PH-DOSING-SYSTEM","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/EnviroswimSemi-AutomaticDoserpHAdjustmentDosingSystem.png?v=1773067729"}],"url":"https:\/\/foundationpumps.com.au\/collections\/enviroswim-pool-pumps.oembed","provider":"Foundation Pumps","version":"1.0","type":"link"}