{"title":"Solar Pumps","description":"\u003cp\u003eSolar pumps provide an efficient and cost-effective solution for off-grid water supply, using solar energy to power pumping systems without the need for mains electricity or diesel generators. Ideal for remote and rural applications, solar pumps are widely used for livestock watering, irrigation, tank filling, and water transfer.\u003c\/p\u003e\n\u003cp\u003eThe range includes solar bore pumps, surface pumps, and complete solar pumping kits with panels, controllers, and accessories. Designed for reliability and performance in harsh conditions, solar pumps deliver consistent water supply with minimal running costs.\u003c\/p\u003e\n\u003cp\u003eShop solar pumps online with Australia-wide delivery and expert support.\u003c\/p\u003e","products":[{"product_id":"outback-scout-dc-3-shallow-bore-solar-pump-kit-with-x1-450w-panel","title":"Outback Scout DC 3\" Shallow Bore Solar Pump Kit with x1 450W Panel","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/www.outbacksolarpumps.com.au\/collections\/outback-off-grid-solar-bore-pump-kits\/products\/outback-scout-dc-3-300w-shallow-bore-submersible-solar-bore-pump-kit-with-1-x-450w-panels-max-18lpm-70m\" target=\"_blank\" rel=\"noopener\"\u003eOutback Scout \u003c\/a\u003eDC 3\" Shallow Bore Solar Pump Kit is a compact and efficient solar-powered pumping system designed specifically for shallow bores, low-yield wells, and remote off-grid water supply. Engineered for Australian conditions, the Scout pump operates directly from solar power without batteries or inverters, delivering dependable water supply with minimal maintenance.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the system is a high-efficiency 300W brushless DC submersible pump paired with an intelligent MPPT solar pump controller that maximises water output throughout the day as sunlight conditions change. The pump features a helical rotor design, providing strong pressure performance ideal for lifting water from shallow sources and transferring it to tanks, troughs, or irrigation systems.\u003c\/p\u003e\n\u003cp\u003eEach kit includes a high-output 450W solar panel, stainless steel check valve, submersible pump cable, and low-level bore probe, providing installers with a practical and reliable off-grid water solution. Built with 304 stainless steel construction and water-filled motor cooling, the Outback Scout is designed for long service life in demanding rural environments. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for shallow bores and low-yield water sources\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e300W brushless DC solar pump with high efficiency operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelical rotor pump design delivering strong pressure performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMPPT solar controller maximises water production in changing sunlight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates directly from solar panels – no batteries or inverter required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump construction for durability and corrosion resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated electronic protection including dry-run and voltage protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play solar pumping kit with controller, cable and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Scout 3\" 300W DC Submersible Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 450W High Efficiency Solar Panel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Submersible Pump Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Stainless Steel Low Level Bore Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Waterproof Electrical Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 25mm 304 Stainless Steel Check Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545111498999,"sku":"OSP-3SCO-18-70-1P","price":2495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Scout-Product-Image.png?v=1772765628"},{"product_id":"outback-pioneer-ac-dc-hybrid-3-shallow-bore-solar-pump-kit-with-x2-450w-panels","title":"Outback Pioneer AC\/DC Hybrid 3\" Shallow Bore Solar Pump Kit with x2 450W Panels","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/www.outbacksolarpumps.com.au\/collections\/outback-off-grid-solar-bore-pump-kits\/products\/outback-pioneer-ac-dc-3-600w-shallow-bore-submersible-solar-bore-pump-kit-with-2-x-450w-panels-max-18lpm-100m\" target=\"_blank\" rel=\"noopener\"\u003eOutback Pioneer\u003c\/a\u003e AC\/DC Hybrid 3\" Solar Pump Kit is a powerful off-grid water pumping system designed for medium-depth bores and higher pressure applications where entry-level solar pumps reach their limits. Featuring a 600W brushless DC submersible pump and AC\/DC hybrid MPPT controller, Pioneer delivers strong pressure performance while maintaining the simplicity and reliability of direct solar operation.\u003c\/p\u003e\n\u003cp\u003eEngineered for remote Australian installations, the Pioneer pump utilises a helical rotor pump design capable of delivering up to 100 metres of head, making it ideal for tank filling over long vertical distances or supplying pressure-demanding off-grid systems. Built from corrosion-resistant 304 stainless steel, the pump is designed for continuous submersion and long service life.\u003c\/p\u003e\n\u003cp\u003eThe included AC\/DC MPPT controller allows the system to operate directly from solar panels or auxiliary AC power sources when required, providing flexibility for sites that demand consistent water availability regardless of sunlight conditions. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600W brushless DC solar bore pump for higher pressure applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC\/DC hybrid MPPT controller allowing solar or grid\/generator operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelical rotor pump design delivering strong pressure performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates directly from solar without batteries or inverters\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 100m pumping head for elevated tank filling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump construction for corrosion resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced electronic protection system for reliable operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play solar pump kit ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Pioneer 3\" 600W DC Submersible Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × AC\/DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 450W High Efficiency Solar Panels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Submersible Pump Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Stainless Steel Low Level Bore Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Waterproof Electrical Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 25mm 304 Stainless Steel Check Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545120182519,"sku":"OSP-3PIO-18-100-2P","price":3595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Pioneer-Product-Image.png?v=1772765791"},{"product_id":"outback-nomad-ac-dc-hybrid-3-deep-bore-solar-pump-kit-with-x3-450w-panels","title":"Outback Nomad AC\/DC Hybrid 3\" Deep Bore Solar Pump Kit with x3 450W Panels","description":"\u003cp\u003eThe Outback Nomad AC\/DC Hybrid 3\" Deep Bore Solar Pump Kit is a high-performance solar pumping system engineered for deeper bores, higher flow demand, and demanding off-grid water supply applications. Designed to bridge the gap between compact solar bore pumps and large high-capacity systems, the Nomad delivers impressive lift and reliable water output without sacrificing efficiency or simplicity.\u003c\/p\u003e\n\u003cp\u003ePowered by a 1000W brushless DC submersible motor and controlled by an intelligent AC\/DC MPPT solar pump controller, the Nomad operates directly from solar panels while still allowing optional AC input for additional flexibility when required. The helical rotor pump end provides stable pressure delivery even at high heads, making it ideal for long vertical lifts to elevated tanks and remote stock watering systems.\u003c\/p\u003e\n\u003cp\u003eConstructed from corrosion-resistant 304 stainless steel with a water-filled encapsulated motor for cooling and longevity, the Nomad is built specifically for harsh Australian rural environments where reliability and independence from grid power are essential. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance 1000W brushless DC bore pump for demanding applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC\/DC hybrid MPPT controller for solar or auxiliary AC operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelical rotor pump design providing stable pressure at high head\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates directly from solar with no batteries or inverter required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 110m pumping head for deep bore installations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump construction for durability and corrosion resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced electronic protection system including dry-run protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play solar pumping kit ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Nomad 3\" 1000W DC Submersible Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × AC\/DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 × 450W High Efficiency Bifacial Solar Panels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Submersible Pump Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Stainless Steel Low Level Bore Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Waterproof Electrical Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 25mm 304 Stainless Steel Check Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545129029879,"sku":"OSP-3NOM-26-110-3P","price":4395.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Product-Image-3-Panel-System.png?v=1772766076"},{"product_id":"outback-outrider-ac-dc-hybrid-3-medium-bore-solar-pump-kit-with-x3-450w-panels","title":"Outback Outrider AC\/DC Hybrid 3\" Medium Bore Solar Pump Kit with x3 450W Panels","description":"\u003cp\u003eThe Outback Outrider AC\/DC Hybrid 3\" Medium Bore Solar Pump Kit is a high-flow solar pumping system designed for applications where water volume is more important than extreme lift. Built for medium-depth bores, tank filling, and high-demand livestock watering systems, the Outrider delivers strong water output while maintaining the simplicity and reliability of solar-powered pumping.\u003c\/p\u003e\n\u003cp\u003ePowered by a 1000W brushless DC motor and helical rotor pump design, the Outrider provides stable pressure performance and excellent pumping efficiency. The included AC\/DC MPPT solar controller allows the system to operate directly from solar panels or auxiliary AC input when required, giving installers flexibility for sites that require reliable water supply even during low sunlight conditions.\u003c\/p\u003e\n\u003cp\u003eConstructed from 304 stainless steel with a water-filled encapsulated motor, the Outrider is engineered for durability and long service life in harsh Australian rural environments where dependable off-grid water supply is essential. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-flow 1000W solar bore pump designed for faster water delivery\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC\/DC hybrid MPPT controller allowing solar or auxiliary AC operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelical rotor pump design providing stable pressure performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates directly from solar with no batteries or inverter required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for medium-depth bores and high-demand water supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump construction for corrosion resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced electronic protection system including dry-run protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play solar pumping kit ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Outrider 3\" 1000W DC Submersible Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × AC\/DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 × 450W High Efficiency Bifacial Solar Panels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Submersible Pump Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Stainless Steel Low Level Bore Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Waterproof Electrical Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 25mm 304 Stainless Steel Check Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545129259255,"sku":"OSP-3OUT-34-80-3P","price":4995.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Product-Image-3-Panel-System.png?v=1772766076"},{"product_id":"outback-trailblazer-ac-dc-hybrid-3-high-flow-solar-bore-pump-kit-with-x3-450w-panels","title":"Outback Trailblazer AC\/DC Hybrid 3\" High Flow Solar Bore Pump Kit with x3 450W Panels","description":"\u003cp\u003eThe Outback Trailblazer AC\/DC Hybrid 3\" High Flow Solar Bore Pump Kit is designed for applications requiring very high water output with moderate lift, making it ideal for rapid tank filling, irrigation supply, and large livestock watering systems. Using a centrifugal submersible pump design with a large 1.5\" discharge, Trailblazer prioritises water volume, delivering impressive flow rates that significantly reduce pumping times.\u003c\/p\u003e\n\u003cp\u003ePowered by a 1000W high-efficiency brushless DC motor, the system operates through an intelligent AC\/DC MPPT solar controller, allowing direct solar operation while also providing the flexibility to run from auxiliary AC power if required. This hybrid capability ensures reliable water supply even during periods of low sunlight.\u003c\/p\u003e\n\u003cp\u003eConstructed with 304 stainless steel components and a water-filled encapsulated motor, the Trailblazer is engineered for durability and long service life in harsh Australian environments where dependable off-grid water supply is essential. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely high flow solar bore pump designed for fast water transfer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC\/DC hybrid MPPT controller allowing solar or auxiliary AC operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCentrifugal pump design optimised for volume-focused applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge 1.5\" outlet reduces friction losses and improves water delivery\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates directly from solar without batteries or inverter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced electronic protection system including dry-run protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e304 stainless steel pump construction for durability and corrosion resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete plug-and-play solar pump kit ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Trailblazer 3\" 1000W DC Submersible Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × AC\/DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 × 450W High Efficiency Bifacial Solar Panels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Submersible Pump Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Stainless Steel Low Level Bore Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Waterproof Electrical Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545143906551,"sku":"OSP-3TRB-67-93-3P","price":5495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Product-Image-3-Panel-System.png?v=1772766076"},{"product_id":"outback-pathfinder-ac-dc-hybrid-surface-solar-transfer-pump-kit-with-x2-450w-panels","title":"Outback Pathfinder AC\/DC Hybrid Surface Solar Transfer Pump Kit with x2 450W Panels","description":"\u003cp\u003eThe Outback Pathfinder AC\/DC Hybrid Surface Solar Transfer Pump Kit is a powerful solar-powered water transfer solution designed for tank filling, irrigation supply, dam pumping, and general off-grid water movement where a surface pump is preferred over a submersible system. Built around a robust 800W brushless DC motor and hybrid MPPT controller, the Pathfinder delivers dependable water transfer using solar power while still allowing optional AC input from mains or generator if required.\u003c\/p\u003e\n\u003cp\u003eDesigned for reliability in remote Australian environments, the Pathfinder features durable internal components including a brass impeller, copper motor windings, and high-quality bearings, ensuring long service life under demanding operating conditions. The intelligent AC\/DC MPPT solar controller automatically prioritises solar power while providing seamless backup when needed.\u003c\/p\u003e\n\u003cp\u003eCapable of delivering up to 37 LPM flow and 62 m head, this surface solar pump is ideal for transferring water between tanks, pumping from dams or creeks, supplying irrigation systems, or providing reliable off-grid water distribution where moderate pressure and consistent daily operation are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC\/DC hybrid operation allowing solar or generator\/grid backup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency 800W brushless DC surface pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMPPT solar controller maximises water output throughout the day\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong pumping performance up to 62 m head\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReliable high-quality internal components including brass impeller and NSK bearings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced electronic protection system including dry-run and voltage protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy-duty frame mounted pump design for durability and easy installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for off-grid water transfer and irrigation supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Outback Pathfinder 800W Surface Solar Transfer Pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × AC\/DC MPPT Solar Pump Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 450W High Efficiency Solar Panels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Cast Iron Powdercoated Pump Frame\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 10m Pump Power Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 40m Low Level Run-Dry Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 30m Tank Float Switch Probe\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 × 3m MC4 Solar Extension Cables\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × 25mm Foot Valve with Strainer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Quick Start Guide and Installation Manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545169531127,"sku":"OSP-1PAT-37-62-2P","price":3295.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-Pathfinder-Product-Image.png?v=1772766691"},{"product_id":"outback-304-stainless-steel-30m-tank-float-switch-to-suite-solar-pumps","title":"Outback 304 Stainless Steel 30m Tank Float Switch to Suite Solar Pumps","description":"\u003cp\u003eThe Outback 304 Stainless Steel Tank Float Switch is a durable probe-style level sensor designed to automatically control solar pump operation based on tank or trough water levels. Built specifically for rural and off-grid water systems, this heavy-duty float switch uses a solid stainless steel probe design rather than a mechanical float, ensuring reliable operation in harsh outdoor environments.\u003c\/p\u003e\n\u003cp\u003eSupplied with a 30-metre pre-attached cable, the probe can be easily installed in tanks or troughs where the pump controller may be located a distance away. When water reaches the probe level, the switch signals the solar pump controller to stop pumping, preventing tank overflow. As the water level drops, the switch resets and automatically allows pumping to resume.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional float switches, the stainless steel probe design is resistant to UV exposure, livestock damage, algae build-up, and long-term water immersion, making it an ideal solution for livestock watering, remote tanks, and open outlet water systems. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty 304 stainless steel probe construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic tank level control for solar pumping systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e30m pre-attached cable for flexible installation distances\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-mechanical probe design for improved reliability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHighly resistant to UV exposure, algae, and livestock damage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrevents tank overflow and dry-run pump operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for solar pump controller integration\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for remote livestock troughs and water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545225335031,"sku":"ACC-FS0030","price":115.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-Solar-Pumps-FS0030-Float-Switch-Pump-Probe.png?v=1772766895"},{"product_id":"outback-automate-25mm-headworks-kit-to-suite-pressurised-solar-pumps","title":"Outback AutoMate 25mm Headworks Kit to Suite Pressurised Solar Pumps","description":"\u003cp\u003eThe Outback AutoMate 25mm Constant Pressure Headworks Kit is a complete installer-ready solution designed to convert solar bore pump systems into a fully pressurised water supply. By pressurising the delivery line, the AutoMate allows solar pumps to operate reliably with float valves, long pipeline runs, and remote tanks where traditional float switches may be impractical.\u003c\/p\u003e\n\u003cp\u003eThe system uses a reverse-acting pressure switch combined with an 8L pressure vessel to automatically start and stop the pump based on system pressure. When water demand opens—such as when a float valve drops in a tank or trough—the pressure falls and the pump starts. Once pressure is restored, the pump automatically shuts off, providing smooth and reliable system operation.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for solar pumping systems, the AutoMate headworks assembly reduces pump cycling, protects system components, and enables stable pressure delivery, making it ideal for livestock watering, irrigation supply, and remote tank filling applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConverts solar bore pumps into a constant pressure water supply system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReverse-acting pressure switch automatically starts and stops the pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8L pressure vessel reduces pump cycling and pressure fluctuations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for 25mm pipeline installations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllows use of float valves in tanks or troughs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for long distance pumping systems\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces electrical signal issues associated with float switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete installer-ready headworks assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReverse-acting pressure switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8L PN10 pre-charged pressure tank\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e25mm brass 5-way tee with ¼\" ports\u003c\/li\u003e\n\u003cli\u003e1000kPa pressure gauge\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e25mm brass nipple\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e25mm gate valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10m 2-core electrical cable for pressure switch wiring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Outback Solar Pumps","offers":[{"title":"Default Title","offer_id":50545245487351,"sku":"KIT-AUTOMATE","price":295.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/Outback-AutoMate-Constant-Pressure-Headworks-Kit-Solar.png?v=1772767161"},{"product_id":"grundfos-sqf-0-6-2-n-stainless-steel-solar-submersible-pump-for-water-supply-systems-with-helical-rotor","title":"Grundfos SQF 0.6-2 N Stainless Steel Solar Submersible Pump for Water Supply Systems with Helical Rotor","description":"\u003cp\u003eWater supply in remote and off-grid locations depends on reliable solar-powered pumping, making this submersible pump suitable for borehole installations using DC energy sources. It supports rural supply, livestock watering, and distributed systems where consistent operation is required without grid connectivity.\u003c\/p\u003e\n\n\u003cp\u003ePerformance extends to a maximum head of 120 m with a flow capacity of approximately 10.6 L\/Min, derived from the performance curve at peak head conditions. This ensures dependable lifting capability for deep bore applications under varying solar input.\u003c\/p\u003e\n\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation at low flow rates while maintaining stable pressure output. This configuration supports smooth water movement, reduces pulsation, and ensures consistent discharge across the working range.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure reliable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design optimized for low flow and high head operation\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eBuilt-in MPPT maximizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eIntegrated dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring operational safety\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow boreholes\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740493844727,"sku":"99612433","price":4935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-0-6-2-n-stainless-steel-solar-submersible-pump-for-water-supply-systems-with-helical-rotor.png?v=1778038123"},{"product_id":"grundfos-sqf-0-6-3-n-stainless-steel-solar-submersible-pump-for-livestock-watering-with-helical-rotor","title":"Grundfos SQF 0.6-3 N Stainless Steel Solar Submersible Pump for Livestock Watering with Helical Rotor","description":"\u003cp\u003eLivestock watering in remote and off-grid environments requires dependable solar-powered pumping, making this submersible pump suitable for borehole installations operating on DC energy. It supports agricultural water supply where consistent delivery is essential without reliance on grid electricity.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 200 m with a flow capacity of approximately 10.8 L\/Min, derived from the performance curve at peak head conditions. This ensures reliable water lifting from deep boreholes under varying solar input levels.\u003c\/p\u003e\n\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation at low flow rates while maintaining stable pressure output. This configuration ensures smooth water movement, minimizes pulsation, and supports consistent discharge across varying operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design optimized for low flow and high head performance\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740494139639,"sku":"99612442","price":4935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-0-6-3-n-stainless-steel-solar-submersible-pump-for-livestock-watering-with-helical-rotor.png?v=1778038164"},{"product_id":"grundfos-sqf-1-2-2-n-stainless-steel-solar-submersible-pump-for-irrigation-supply-with-helical-rotor","title":"Grundfos SQF 1.2-2 N Stainless Steel Solar Submersible Pump for Irrigation Supply with Helical Rotor","description":"\u003cp\u003eIrrigation supply in off-grid agricultural environments depends on reliable solar-powered pumping, making this submersible pump suitable for borehole installations operating on DC energy. It supports water distribution for irrigation systems where consistent delivery is required without grid dependency.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 120 m while delivering flow up to approximately 23.3 L\/Min at lower head conditions. This allows flexible operation across varying depths, supporting both deep lifting and higher flow requirements depending on system demand.\u003c\/p\u003e\n\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation across a wide range of conditions, maintaining stable pressure while supporting smooth water movement. This configuration minimizes pulsation and ensures consistent discharge across varying operating points.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design supporting wide operating range from low to high flow\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740498858231,"sku":"99612466","price":4935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-1-2-2-n-stainless-steel-solar-submersible-pump-for-irrigation-supply-with-helical-rotor.png?v=1778038202"},{"product_id":"grundfos-sqf-1-2-3-n-stainless-steel-solar-submersible-pump-for-remote-water-supply-with-helical-rotor","title":"Grundfos SQF 1.2-3 N Stainless Steel Solar Submersible Pump for Remote Water Supply with Helical Rotor","description":"\u003cp\u003eDeep bore water supply in remote and off-grid locations requires dependable solar-powered pumping, making this submersible pump suitable for installations operating on DC energy sources. It supports water delivery from deep boreholes where consistent lifting and reliable operation are essential without grid dependency.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 250 m while delivering flow up to approximately 22.3 L\/Min at lower head conditions. This enables flexible operation across deep installations, supporting both high lifting capability and stable discharge based on system requirements.\u003c\/p\u003e\n\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation across a wide working range, maintaining stable pressure while supporting smooth water movement. This configuration minimizes pulsation and ensures consistent discharge across varying operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design supporting wide operating range from low to high flow\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740502659319,"sku":"99612470","price":4935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-1-2-3-n-stainless-steel-solar-submersible-pump-for-deep-bore-water-supply-with-helical-rotor.png?v=1778038243"},{"product_id":"grundfos-sqf-2-5-2-n-stainless-steel-solar-submersible-pump-for-tank-filling-with-helical-rotor","title":"Grundfos SQF 2.5-2 N Stainless Steel Solar Submersible Pump for Tank Filling with Helical Rotor","description":"\u003cp\u003eTank filling applications in remote and off-grid locations require dependable solar-powered pumping to ensure consistent water delivery, making this submersible pump suitable for borehole installations operating on DC energy. It supports storage tank filling where steady flow and reliable operation are essential without grid dependency.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 120 m while delivering flow up to approximately 50 L\/Min at lower head conditions, based on the performance curve. This enables efficient water transfer with higher volume delivery while maintaining flexibility for varying system requirements.\u003c\/p\u003e\n\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation across a wide working range, maintaining stable pressure while supporting smooth water movement. This configuration minimizes pulsation and ensures consistent discharge across varying operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design supporting higher flow delivery with stable pressure\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740505968887,"sku":"99612494","price":4935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-2-5-2-n-stainless-steel-solar-submersible-pump-for-tank-filling-with-helical-rotor.png?v=1778038285"},{"product_id":"grundfos-sqf-1-30-n-stainless-steel-solar-submersible-pump-for-small-water-supply-with-helical-rotor","title":"Grundfos SQF 1-30 N Stainless Steel Solar Submersible Pump for Small Water Supply with Helical Rotor","description":"\u003cp\u003eSmall-scale water supply in remote and off-grid environments requires efficient solar-powered pumping, making this submersible pump suitable for borehole installations operating on DC energy. It supports low-demand water systems where reliable delivery is essential without dependence on grid electricity.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 40 m while delivering flow up to approximately 36 L\/Min at lower head conditions, based on the performance curve. This allows flexible operation for shallow lifting applications requiring stable and efficient flow delivery.\u003c\/p\u003e\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation at lower power input while maintaining steady pressure output. This configuration ensures smooth water movement, minimizes pulsation, and supports consistent discharge across varying operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design optimized for low power and efficient flow delivery\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740883128567,"sku":"99612855","price":2635.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-1-30-n-stainless-steel-solar-submersible-pump-for-small-water-supply-with-helical-rotor.png?v=1778038462"},{"product_id":"grundfos-sqf-1-70-n-stainless-steel-solar-submersible-pump-for-elevated-tank-supply-with-helical-rotor","title":"Grundfos SQF 1-70 N Stainless Steel Solar Submersible Pump for Elevated Tank Supply with Helical Rotor","description":"\u003cp\u003eElevated tank supply systems in remote and off-grid locations require reliable solar-powered pumping to ensure consistent water delivery at height. This submersible pump is suitable for borehole installations operating on DC energy, supporting applications where water must be lifted and stored in overhead tanks without grid dependency.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 70 m while delivering flow up to approximately 64 L\/Min at lower head conditions, based on the performance curve. This allows efficient water transfer for storage and distribution systems requiring moderate head and higher flow capability.\u003c\/p\u003e\n\u003cp\u003eA helical rotor hydraulic design enables efficient operation across a wide working range, maintaining stable pressure while supporting smooth water movement. This configuration minimizes pulsation and ensures consistent discharge across varying operating conditions.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for both pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHelical rotor design supporting stable flow with moderate head performance\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installation\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing backflow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740884340983,"sku":"92533610","price":2845.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-1-70-n-stainless-steel-solar-submersible-pump-for-elevated-tank-supply-with-helical-rotor.png?v=1778038486"},{"product_id":"grundfos-sqf-3a-10-n-stainless-steel-solar-submersible-pump-for-irrigation-distribution-with-closed-impeller","title":"Grundfos SQF 3A-10 N Stainless Steel Solar Submersible Pump for Irrigation Distribution with Closed Impeller","description":"\u003cp\u003eIrrigation distribution in agricultural and off-grid environments requires high-volume water delivery powered by solar energy, making this submersible pump suitable for borehole installations operating on DC power. It supports applications where large flow capacity is essential for effective water distribution across fields.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 70 m while delivering flow up to approximately 58.3 L\/Min at lower head conditions, derived from the performance curve peak. This enables efficient handling of high-volume water transfer while maintaining flexibility across varying system demands.\u003c\/p\u003e\n\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers enables efficient high-flow operation while maintaining stable pressure output. This configuration ensures smooth flow transition, reduces hydraulic losses, and supports consistent discharge across varying operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, ensuring corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure reliable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration for high flow delivery\u003c\/li\u003e\n\u003cli\u003eDC-powered operation designed for solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing power input from solar sources\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe performance\u003c\/li\u003e\n\u003cli\u003e4-inch pump design suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740886929655,"sku":"99612499","price":4980.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-3a-10-n-stainless-steel-solar-submersible-pump-for-irrigation-distribution-with-closed-impeller.png?v=1778038515"},{"product_id":"grundfos-sqf-5a-3-n-stainless-steel-high-flow-solar-submersible-pump-for-bulk-water-transfer-with-closed-impeller","title":"Grundfos SQF 5A-3 N Stainless Steel High Flow Solar Submersible Pump for Bulk Water Transfer with Closed Impeller","description":"\u003cp\u003eBulk water transfer in agricultural and off-grid environments requires high-volume solar-powered pumping, making this submersible pump suitable for borehole installations operating on DC energy. It supports applications where large quantities of water must be moved efficiently without reliance on grid electricity.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 15 m while delivering flow up to approximately 150 L\/Min at lower head conditions, derived from the performance curve peak. This enables efficient handling of high-volume transfer requirements with stable output across varying demand conditions.\u003c\/p\u003e\n\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers enables efficient high-flow operation while maintaining stable pressure characteristics. This configuration reduces hydraulic losses and ensures consistent discharge across the working range.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, providing corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration for high flow performance\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003e4-inch construction suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel hydraulic components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740896301303,"sku":"99612829","price":4510.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-5a-3-n-stainless-steel-high-flow-solar-submersible-pump-for-bulk-water-transfer-with-closed-impeller.png?v=1778038544"},{"product_id":"grundfos-sqf-5a-7-n-stainless-steel-hi-flow-solar-submersible-pump-for-surface-water-transfer-with-closed-impeller","title":"Grundfos SQF 5A-7 N Stainless Steel Hi-Flow Solar Submersible Pump for Surface Water Transfer with Closed Impeller","description":"\u003cp\u003eWater distribution in agricultural and off-grid environments requires high-volume solar-powered pumping, making this submersible pump suitable for borehole installations operating on DC energy. It supports applications where consistent flow delivery is required for distribution across storage systems and irrigation layouts.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 50 m while delivering flow up to approximately 113 L\/Min at lower head conditions, derived from the performance curve peak. This ensures efficient handling of high-volume transfer while maintaining stable output across varying operating conditions.\u003c\/p\u003e\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers enables efficient high-flow operation while maintaining stable pressure characteristics. This configuration minimizes internal hydraulic losses and ensures consistent discharge across the working range.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, providing corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration for high flow performance\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT maximizing solar energy utilization efficiency\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing pump damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003e4-inch construction suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel hydraulic components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740896989431,"sku":"99612834","price":4980.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-5a-7-n-stainless-steel-high-flow-solar-submersible-pump-for-surface-water-transfer-with-closed-impeller.png?v=1778038572"},{"product_id":"grundfos-sqf-7-4-n-stainless-steel-solar-submersible-pump-for-irrigation-distribution-with-closed-impeller","title":"Grundfos SQF 7-4 N Stainless Steel Solar Submersible Pump for Field Irrigation with Closed Impeller","description":"\u003cp\u003eField irrigation in agricultural and off-grid environments requires dependable solar-powered pumping to ensure consistent water delivery across wide coverage areas. This submersible pump is suitable for borehole installations operating on DC energy, supporting irrigation systems where stable flow and efficient distribution are essential.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 35 m while delivering flow up to approximately 218 L\/Min at lower head conditions, derived from the performance curve peak. This enables high-volume water delivery while maintaining consistent discharge across varying operating requirements.\u003c\/p\u003e\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers supports efficient operation across a wide working range while maintaining stable pressure characteristics. This configuration minimizes internal hydraulic losses and ensures consistent flow delivery.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, providing corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration enabling efficient flow distribution\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing power utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor performance\u003c\/li\u003e\n\u003cli\u003e4-inch construction suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel hydraulic components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50740899119351,"sku":"99612837","price":4535.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-7-4-n-stainless-steel-solar-submersible-pump-for-irrigation-distribution-with-closed-impeller.png?v=1778038599"},{"product_id":"grundfos-sqf-9-3-n-stainless-steel-solar-submersible-pump-for-water-storage-systems-with-closed-impeller","title":"Grundfos SQF 9-3 N Stainless Steel Solar Submersible Pump for Water Storage Systems with Closed Impeller","description":"\u003cp\u003eReservoir filling in remote and off-grid environments requires dependable solar-powered pumping capable of handling large water volumes efficiently. This submersible pump is suitable for borehole installations operating on DC energy, supporting applications where continuous high-capacity water transfer is essential.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 25 m while delivering flow up to approximately 261 L\/Min at lower head conditions, derived from the performance curve peak. This enables efficient bulk water movement while maintaining stable discharge across varying operational requirements.\u003c\/p\u003e\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers supports efficient operation across a broad working range while maintaining stable pressure characteristics. This configuration minimizes hydraulic losses and ensures smooth, consistent water delivery.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, providing corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration optimized for high-capacity transfer\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor performance\u003c\/li\u003e\n\u003cli\u003e4-inch construction suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel hydraulic components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50742546039031,"sku":"99612866","price":4535.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-9-3-n-stainless-steel-solar-submersible-pump-for-water-storage-systems-with-closed-impeller.png?v=1778038626"},{"product_id":"grundfos-sqf-14-3-n-stainless-steel-solar-submersible-pump-for-high-volume-water-transfer-with-closed-impeller","title":"Grundfos SQF 14-3 N Stainless Steel Solar Submersible Pump for High Volume Water Transfer with Closed Impeller","description":"\u003cp\u003eHigh-volume water transfer in agricultural and off-grid environments requires dependable solar-powered pumping capable of moving large quantities of water efficiently. This submersible pump is suitable for borehole installations operating on DC energy, supporting applications where continuous large-capacity flow is essential.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 25 m while delivering flow up to approximately 400 L\/Min at lower head conditions, derived from the performance curve peak. This enables efficient bulk water movement while maintaining stable discharge across varying operational requirements.\u003c\/p\u003e\n\n\u003cp\u003eA multi-stage centrifugal hydraulic design with closed stainless steel impellers supports efficient operation across a broad working range while maintaining stable pressure characteristics. This configuration minimizes hydraulic losses and ensures smooth, consistent water delivery.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for pump, impellers, and motor components, providing corrosion resistance in submerged environments. A 4-inch design requires a minimum borehole diameter of 104 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure reliable operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClosed stainless steel impeller configuration optimized for large volume transfer\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor performance\u003c\/li\u003e\n\u003cli\u003e4-inch construction suitable for larger borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel hydraulic components for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50742547644663,"sku":"99612853","price":4535.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-14-3-n-stainless-steel-solar-submersible-pump-for-high-volume-water-transfer-with-closed-impeller.png?v=1778038729"},{"product_id":"grundfos-sqf-3-105-n-stainless-steel-deep-solar-submersible-pump-for-water-supply-with-polyamide-impeller","title":"Grundfos SQF 3-105 N Stainless Steel Deep Solar Submersible Pump for Water Supply with Polyamide Impeller","description":"\u003cp\u003eElevated water supply systems in remote and off-grid environments require dependable solar-powered pumping capable of delivering water from deep bore installations. This submersible pump is suitable for renewable energy applications where reliable pressure delivery and efficient borehole operation are essential without dependence on grid electricity.\u003c\/p\u003e\n\n\u003cp\u003ePerformance reaches a maximum head of 150 m while delivering flow up to approximately 75 L\/Min at lower head conditions, derived from the performance curve peak. This allows efficient high-lift operation while maintaining stable discharge across varying demand requirements.\u003c\/p\u003e\n\n\u003cp\u003eA multi-stage centrifugal hydraulic design supports medium-flow operation with stable pressure characteristics across deep bore applications. The polyamide impeller configuration minimizes rotational mass while supporting efficient hydraulic performance and smooth water delivery throughout the operating range.\u003c\/p\u003e\n\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for the pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable long-term operation.\u003c\/p\u003e\n\n\u003cstrong\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePolyamide impeller configuration supporting efficient hydraulic performance\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel pump and motor construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50742566191351,"sku":"92533593","price":5630.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-3-105-n-stainless-steel-deep-bore-solar-submersible-pump-for-elevated-water-supply-with-polyamide-impeller.png?v=1778038797"},{"product_id":"grundfos-sqf-5-70-n-stainless-steel-solar-submersible-pump-for-pressure-water-supply-with-polyamide-impeller","title":"Grundfos SQF 5-70 N Stainless Steel Solar Submersible Pump for Pressure Water Supply with Polyamide Impeller","description":"\u003cp\u003ePressure water supply systems in remote and off-grid environments require dependable solar-powered pumping capable of delivering stable water pressure from borehole installations. This submersible pump is suitable for renewable energy applications where consistent supply and efficient operation are essential without dependence on grid electricity.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 100 m while delivering flow up to approximately 133 L\/Min at lower head conditions, derived from the performance curve peak. This allows efficient medium-head operation while maintaining stable discharge across varying demand requirements.\u003c\/p\u003e\n\u003cp\u003eA multi-stage centrifugal hydraulic design supports medium-to-high flow operation with balanced pressure characteristics across borehole applications. The polyamide impeller configuration reduces rotational mass while supporting efficient hydraulic performance and smooth water delivery throughout the operating range.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for the pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable long-term operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolyamide impeller configuration supporting efficient hydraulic operation\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel pump and motor construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50742594928887,"sku":"92533526","price":5630.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-5-70-n-stainless-steel-solar-submersible-pump-for-pressure-water-supply-with-polyamide-impeller.png?v=1778038901"},{"product_id":"grundfos-sqf-7-55-n-stainless-steel-solar-submersible-pump-for-water-distribution-with-polyamide-impeller","title":"Grundfos SQF 7-55 N Stainless Steel Solar Submersible Pump for Water Distribution with Polyamide Impeller","description":"\u003cp\u003eElevated water distribution in remote and off-grid environments requires dependable solar-powered pumping capable of maintaining stable delivery across extended systems. This submersible pump is suitable for renewable energy installations where consistent water movement and reliable pressure performance are essential without dependence on grid electricity.\u003c\/p\u003e\n\u003cp\u003ePerformance reaches a maximum head of 80 m while delivering flow up to approximately 170 L\/Min at lower head conditions, derived from the performance curve peak. This enables efficient medium-to-high volume transfer while maintaining stable discharge across varying operational requirements.\u003c\/p\u003e\n\u003cp\u003eA multi-stage centrifugal hydraulic design supports balanced flow and pressure characteristics across borehole applications. The polyamide impeller configuration reduces rotational mass while supporting efficient hydraulic performance and smooth water delivery throughout the operating range.\u003c\/p\u003e\n\u003cp\u003eThe construction incorporates AISI 316 stainless steel for the pump and motor components, providing corrosion resistance in submerged environments. A compact 3-inch design allows installation in boreholes with a minimum diameter of 76 mm, while integrated protections including dry-running, overload, and voltage safeguards ensure dependable long-term operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolyamide impeller configuration supporting efficient hydraulic operation\u003c\/li\u003e\n\u003cli\u003eDC-powered operation compatible with solar energy systems\u003c\/li\u003e\n\u003cli\u003eIntegrated MPPT optimizing energy utilization from solar input\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry-running protection preventing operational damage\u003c\/li\u003e\n\u003cli\u003eOverload and voltage protection ensuring safe motor operation\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch construction suitable for narrow borehole installations\u003c\/li\u003e\n\u003cli\u003eAISI 316 stainless steel pump and motor construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve preventing reverse flow in vertical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":50742787670263,"sku":"92533584","price":5630.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-sqf-7-55-n-stainless-steel-solar-submersible-pump-for-elevated-water-distribution-with-polyamide-impeller.png?v=1778038927"}],"url":"https:\/\/foundationpumps.com.au\/collections\/solar-pumps.oembed","provider":"Foundation Pumps","version":"1.0","type":"link"}