{"product_id":"grundfos-hydro-mpc-e-2-x-crie-10-2-three-phase-1-5kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","title":"Grundfos Hydro MPC-E 2 x CRIE 10-2 Three Phase 2 x 1.5kW 304ss Booster System w\/8L Tank and CU 352 Controller","description":"\u003cp\u003eAcross installations such as gymnasiums, aquatic centres and student housing running wall-to-wall showers, the Hydro MPC-E 2 CRIE 10-2 maintains stable pressure at every draw-off point. The complete system ships factory assembled and tested under part number 93637553.\u003c\/p\u003e\u003cp\u003eThis set provides up to 523 L\/min of flow capacity. Variable-speed operation can develop up to 29.2 metres of head where required. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 6.4 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.\u003c\/p\u003e\u003cp\u003eTypical duty sits with water supply networks, high-rise developments and irrigation schemes. It is designed for clean-water pressure boosting where demand varies through the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRated for 16 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eControl decisions come from real pump curves, not generic models, via the GENIECON UNIT.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with  permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eEach main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 8L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eThe touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.\u003c\/li\u003e\n\u003cli\u003ePump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.\u003c\/li\u003e\n\u003cli\u003eThe stainless steel manifold assembly is supplied with two 50 mm manifold connections.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003cli\u003eThe system pairs two CRIE 10-2 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003eA suction-side pressure sensor guards the pumps against dry running.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRIE 10-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL with touch display\u003c\/li\u003e\n\u003cli\u003eGENIECON multi-pump control unit\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring (dry-run protection)\u003c\/li\u003e\n\u003cli\u003e8L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383712055543,"sku":"93637553","price":32143.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-mpc-e-2-x-crie-10-2-three-phase-1-5kw-variable-speed-304ss-booster-system-w8l-tank-cu-352.png?v=1792667827","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-mpc-e-2-x-crie-10-2-three-phase-1-5kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","provider":"Foundation Pumps","version":"1.0","type":"link"}