{"product_id":"grundfos-hydro-mpc-e-2-x-crie-10-6-three-phase-4kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","title":"Grundfos Hydro MPC-E 2 x CRIE 10-6 Three Phase 2 x 4kW 304ss Booster System w\/8L Tank and CU 352 Controller","description":"\u003cp\u003eBusiness parks adding tenancies faster than their mains can serve get a constant-pressure answer in this Grundfos Hydro MPC-E 2 CRIE 10-6 set. Everything is ordered under the single part number 93637568.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 520 L\/min across the system. The pumps can develop up to 87 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 3 x 400 V supply at 50 Hz with a rated current of 15.5 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.\u003c\/p\u003e\u003cp\u003eIts home ground covers high-rise developments, industry and commercial buildings. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe package is wet-tested and pre-configured, requiring only pipework and power on site.\u003c\/li\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eThe system pairs two CRIE 10-6 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003eThe GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring provides dry-running protection if the suction supply is insufficient.\u003c\/li\u003e\n\u003cli\u003eAn integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003cli\u003eVariable speed comes from frequency converters matched to  permanent magnet motors, keeping the booster set in its efficient range.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 50 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eRated for 16 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eEach main pump is rated 4 kW (P2), so per-pump draw scales down as speed follows demand.\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL control with touch display gives operating staff full staging visibility.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRIE 10-6 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL with touch display\u003c\/li\u003e\n\u003cli\u003eGENIECON multi-pump control unit\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring (dry-run protection)\u003c\/li\u003e\n\u003cli\u003e8L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383712252151,"sku":"93637568","price":34905.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-mpc-e-2-x-crie-10-6-three-phase-4kw-variable-speed-304ss-booster-system-w8l-tank-cu-352.png?v=1792667844","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-mpc-e-2-x-crie-10-6-three-phase-4kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","provider":"Foundation Pumps","version":"1.0","type":"link"}