{"product_id":"grundfos-hydro-mpc-e-2-x-crie-20-4-three-phase-7-5kw-variable-speed-304ss-booster-system-w18l-tank-cu-352","title":"Grundfos Hydro MPC-E 2 x CRIE 20-4 Three Phase 2 x 7.5kW 304ss Booster System w\/18L Tank and CU 352 Controller","description":"\u003cp\u003eFor expanding commercial sites whose original mains feed no longer keep pace, a factory-assembled Hydro MPC-E 2 CRIE 20-4 package provides a well-matched solution, with two CRIE 20-4 pumps staged against the demand curve. Part number 93637624 provides the complete tested package in a single order line.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 1167 L\/min across the system. The pumps can develop up to 83.7 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 80 mm manifold connections, valves, sensors and a pressure gauge, plus a 18L diaphragm tank. Electrical supply is 3 x 415 V at 50 Hz with a rated current of 28 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.\u003c\/p\u003e\u003cp\u003eIts home ground covers industry, commercial buildings and high-rise developments. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAn integrated 18L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring provides dry-running protection if the suction supply is insufficient.\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL control with touch display gives operating staff full staging visibility.\u003c\/li\u003e\n\u003cli\u003eThe system pairs two CRIE 20-4 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003eControl decisions come from real pump curves, not generic models, via the GENIECON UNIT.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 7.5 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 16 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 80 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eSlow-speed duty and staged switching keep consumption down through low-demand hours.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with  permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eCascade logic brings pumps on-line and off-line against changing demand without manual intervention.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRIE 20-4 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL with touch display\u003c\/li\u003e\n\u003cli\u003eGENIECON multi-pump control unit\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring (dry-run protection)\u003c\/li\u003e\n\u003cli\u003e18L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383712514295,"sku":"93637624","price":46428.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-mpc-e-2-x-crie-20-4-three-phase-7-5kw-variable-speed-304ss-booster-system-w18l-tank-cu-352.png?v=1792667861","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-mpc-e-2-x-crie-20-4-three-phase-7-5kw-variable-speed-304ss-booster-system-w18l-tank-cu-352","provider":"Foundation Pumps","version":"1.0","type":"link"}