{"product_id":"grundfos-hydro-mpc-e-2-x-crie-20-7-three-phase-11kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","title":"Grundfos Hydro MPC-E 2 x CRIE 20-7 Three Phase 2 x 11kW 304ss Booster System w\/8L Tank and CU 352 Controller","description":"\u003cp\u003eMixed-use buildings where a single booster covers retail, offices and apartments rely on booster systems with no tolerance for pressure variation, and the Hydro MPC-E 2 CRIE 20-7 is engineered for exactly that duty. Everything is ordered under the single part number 93637629.\u003c\/p\u003e\u003cp\u003eFlow capacity reaches 1125 L\/min. Up to 143 metres of head is available to maintain pressure as demand changes. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 80 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 40 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.\u003c\/p\u003e\u003cp\u003eTypical duty sits with high-rise developments, commercial buildings and industry. It is designed for clean-water pressure boosting where demand varies through the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe set ships with an 8L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with  permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRIE 20-7 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003ePump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.\u003c\/li\u003e\n\u003cli\u003eThe package is wet-tested and pre-configured, requiring only pipework and power on site.\u003c\/li\u003e\n\u003cli\u003eSlow-speed duty and staged switching keep consumption down through low-demand hours.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 16 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 11 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 80 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eA suction-side pressure sensor guards the pumps against dry running.\u003c\/li\u003e\n\u003cli\u003eThe touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.\u003c\/li\u003e\n\u003cli\u003eThe GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRIE 20-7 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL with touch display\u003c\/li\u003e\n\u003cli\u003eGENIECON multi-pump control unit\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring (dry-run protection)\u003c\/li\u003e\n\u003cli\u003e8L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383712612599,"sku":"93637629","price":48435.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-mpc-e-2-x-crie-20-7-three-phase-11kw-variable-speed-304ss-booster-system-w8l-tank-cu-352.png?v=1792667863","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-mpc-e-2-x-crie-20-7-three-phase-11kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","provider":"Foundation Pumps","version":"1.0","type":"link"}