{"product_id":"grundfos-hydro-mpc-e-2-x-crie-5-4-single-phase-1-1kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","title":"Grundfos Hydro MPC-E 2 x CRIE 5-4 Single Phase 2 x 1.1kW 304ss Booster System w\/8L Tank and CU 352 Controller","description":"\u003cp\u003eFor day spas and compact medical centres running half a dozen outlets at once, a factory-assembled Hydro MPC-E 2 CRIE 5-4 package provides a well-matched solution, with two CRIE 5-4 pumps staged against the demand curve. Everything is ordered under the single part number 93637522.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 340 L\/min across the system. The pumps can develop up to 39.9 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 1 x 240 V at 50 Hz with a rated current of 6.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.\u003c\/p\u003e\u003cp\u003eTypical duty sits with high-rise developments, industry and commercial buildings. It is designed for clean-water pressure boosting where demand varies through the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGENIECON PANEL control with touch display gives operating staff full staging visibility.\u003c\/li\u003e\n\u003cli\u003eA suction-side pressure sensor guards the pumps against dry running.\u003c\/li\u003e\n\u003cli\u003eThe controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRIE 5-4 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 1.1 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eControl decisions come from real pump curves, not generic models, via the GENIECON UNIT.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 50 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eRated for 16 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with  permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 8L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRIE 5-4 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eGENIECON PANEL with touch display\u003c\/li\u003e\n\u003cli\u003eGENIECON multi-pump control unit\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003eInlet pressure monitoring (dry-run protection)\u003c\/li\u003e\n\u003cli\u003e8L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383710908663,"sku":"93637522","price":28989.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-mpc-e-2-x-crie-5-4-single-phase-1-1kw-variable-speed-304ss-booster-system-w8l-tank-cu-352.png?v=1792667794","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-mpc-e-2-x-crie-5-4-single-phase-1-1kw-variable-speed-304ss-booster-system-w8l-tank-cu-352","provider":"Foundation Pumps","version":"1.0","type":"link"}