{"product_id":"grundfos-hydro-multi-e-2-x-cre-10-10-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRE 10-10 Three Phase 2 x 5.5kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eAcross installations such as gymnasiums, aquatic centres and student housing running wall-to-wall showers, the Hydro Multi-E 2 CRE 10-10 maintains stable pressure at every draw-off point. Part number 99657285 provides the complete tested package in a single order line.\u003c\/p\u003e\u003cp\u003eThe system supports flow rates up to 511 L\/min. It can develop up to 145 metres of head for dependable pressure boosting. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eFor installation, the booster is supplied pre-assembled with stainless steel manifolds, two 50 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It is designed for 3 x 380-415 V power at 50 \/ 60 Hz with a rated current of 21.9 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 16 bar.\u003c\/p\u003e\u003cp\u003eApplications include hotel plant rooms, industrial process supply and aged-care complexes. The control flexibility suits clean-water boosting in new installations and upgrades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 50 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eRated 5.5 kW (P2) on every main pump in the frame.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRE 10-10 pumps share the boosting work in parallel.\u003c\/li\u003e\n\u003cli\u003eRated for 16 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eVariable speed comes from frequency converters matched to IE5 permanent magnet motors, keeping the booster set in its efficient range.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003ePump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.\u003c\/li\u003e\n\u003cli\u003eAn integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRE 10-10 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383706616055,"sku":"99657285","price":32155.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-cre-10-10-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667677","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-cre-10-10-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}