{"product_id":"grundfos-hydro-multi-e-2-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRE 10-2 Three Phase 2 x 0.75kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eBusiness parks adding tenancies faster than their mains can serve get a constant-pressure answer in this Grundfos Hydro Multi-E 2 CRE 10-2 set. Quote part number 99614384 to have it arrive pre-configured and ready for the plant room.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 445 L\/min across the system. The pumps can develop up to 28 metres of head when pressure demand increases. There is no separate central controller to purchase: Multi-Master control resides within the pumps, either unit can assume the controlling role, and a fault is handed over cleanly without interrupting supply.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus a 24L diaphragm tank. Electrical supply is 3 x 380-415 V at 50 \/ 60 Hz with a rated current of 3.7 A. The motors have IP54 protection and the system is rated to 10 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eApplications include hospitals, industrial process supply and schools and universities. The control flexibility suits clean-water boosting in new installations and upgrades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency converters on the motors pair with IE5 permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 0.75 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eThe controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.\u003c\/li\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003eThe stainless steel manifold assembly is supplied with two 50 mm manifold connections.\u003c\/li\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRE 10-2 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 10 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRE 10-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383701274871,"sku":"99614384","price":17607.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667578","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}