{"product_id":"grundfos-hydro-multi-e-2-x-cre-10-9-three-phase-4kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRE 10-9 Three Phase 2 x 4kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eAcross installations such as school blocks and council facilities fed by long, pressure-hungry reticulation, the Hydro Multi-E 2 CRE 10-9 maintains stable pressure at every draw-off point. Quote part number 99614424 to have it arrive pre-configured and ready for the plant room.\u003c\/p\u003e\u003cp\u003eFlow capacity reaches 476 L\/min. Up to 130 metres of head is available to maintain pressure as demand changes. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with a rated current of 16.2 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 16 bar.\u003c\/p\u003e\u003cp\u003eIts home ground covers schools and universities, hospitals and hotel plant rooms. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe package is wet-tested and pre-configured, requiring only pipework and power on site.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRE 10-9 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003eBoth constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eEach pump is driven by IE5 permanent magnet motors with frequency-controlled speed matching demand.\u003c\/li\u003e\n\u003cli\u003eEach main pump is rated 4 kW (P2), so per-pump draw scales down as speed follows demand.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 16 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003eCascade logic brings pumps on-line and off-line against changing demand without manual intervention.\u003c\/li\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003cli\u003eThe stainless steel manifold assembly is supplied with two 50 mm manifold connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRE 10-9 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383702094071,"sku":"99614424","price":28690.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-cre-10-9-three-phase-4kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667596","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-cre-10-9-three-phase-4kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}