{"product_id":"grundfos-hydro-multi-e-2-x-cre-3-5-single-phase-0-55kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRE 3-5 Single Phase 2 x 0.55kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eSites such as showers, coffee machines and dishwashers competing for one limited mains feed require consistent pressure regardless of demand fluctuation; the Hydro Multi-E 2 CRE 3-5 achieves this with two CRE 3-5 pumps operating in parallel. Quote part number 99614240 to have it arrive pre-configured and ready for the plant room.\u003c\/p\u003e\u003cp\u003eThe system supports flow rates up to 166 L\/min. It can develop up to 46 metres of head for dependable pressure boosting. There is no separate central controller to purchase: Multi-Master control resides within the pumps, either unit can assume the controlling role, and a fault is handed over cleanly without interrupting supply.\u003c\/p\u003e\u003cp\u003eThe two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus a 24L diaphragm tank. Electrical supply is 1 x 200-240 V at 50 \/ 60 Hz with a rated current of 6.68 A. The motors have IP54 protection and the system is rated to 10 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eIts home ground covers aged-care complexes, hospitals and hotel plant rooms. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless steel manifolds provide two 50 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eSetup and monitoring run through the Grundfos GO app rather than a panel visit.\u003c\/li\u003e\n\u003cli\u003eThe package is wet-tested and pre-configured, requiring only pipework and power on site.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 10 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 0.55 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRE 3-5 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with IE5 permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRE 3-5 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383698948343,"sku":"99614240","price":14414.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-cre-3-5-single-phase-0-55kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667493","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-cre-3-5-single-phase-0-55kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}