{"product_id":"grundfos-hydro-multi-e-2-x-crne-10-1-three-phase-0-55kw-variable-speed-304ss-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRNE 10-1 Three Phase 2 x 0.55kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eResidential towers and medium commercial sites outgrowing their mains pressure rely on booster systems with no tolerance for pressure variation, and the Hydro Multi-E 2 CRNE 10-1 is engineered for exactly that duty. Specify part number 99752266 and the whole set lands tested, assembled and ready for pipework.\u003c\/p\u003e\u003cp\u003eThe system supports flow rates up to 511 L\/min. It can develop up to 14 metres of head for dependable pressure boosting. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with a rated current of 2.94 A. Motors are protected to IP55, while maximum system pressure is 10 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eApplications include mixed-use commercial buildings, hotel plant rooms and schools and universities. The control flexibility suits clean-water boosting in new installations and upgrades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eBoth constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003eSetup and monitoring run through the Grundfos GO app rather than a panel visit.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 50 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003cli\u003eEach main pump is rated 0.55 kW (P2), so per-pump draw scales down as speed follows demand.\u003c\/li\u003e\n\u003cli\u003eAn integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003cli\u003eThe system pairs two CRNE 10-1 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003eVariable speed comes from frequency converters matched to IE5 permanent magnet motors, keeping the booster set in its efficient range.\u003c\/li\u003e\n\u003cli\u003eThe system protects its pumps against dry running if the incoming supply is lost.\u003c\/li\u003e\n\u003cli\u003eRated for 10 bar system pressure; motors carry IP55 protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRNE 10-1 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383708680439,"sku":"99752266","price":18232.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-crne-10-1-three-phase-0-55kw-variable-speed-304ss-booster-pump-set-24l-tank.png?v=1792667738","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-crne-10-1-three-phase-0-55kw-variable-speed-304ss-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}