{"product_id":"grundfos-hydro-multi-e-2-x-crne-64-3-three-phase-26kw-variable-speed-304ss-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 2 x CRNE 64-3 Three Phase 2 x 26kW Variable Speed 304ss Booster Pump Set with 24L Tank","description":"\u003cp\u003eCorporate office high-rises with multi-tier plumbing risers eliminate upper-floor pressure loss using the Hydro Multi-E 2 CRNE 64-3. Integrated variable-speed drives coordinate the two CRNE 64-3 pumps in parallel, seamlessly ramping output as fixtures open. Part number 93368445 provides the complete tested package in a single order line.\u003c\/p\u003e\u003cp\u003eEngineered for high demand, the system supplies up to 3400 L\/min at the header. Multistage vertical hydraulics produce up to 131.6 metres of maximum head. Because every pump carries its own frequency converter and Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eArriving fully wet-tested from the factory, the system integrates stainless steel manifolds, two 150 mm manifold connections, isolation and non-return valves, pressure sensors, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with combined rated current of 75.4 A (2 x 37.7 A per pump). Motors carry IP54 sealing with maximum pressure of 16 bar. Liquid-temperature suitability is 5°C to 60°C, and inlet pressure is rated to 16 bar.\u003c\/p\u003e\u003cp\u003eFacilities such as high-rise apartments, hotel plant rooms and schools and universities rely on the system for smooth, inverter-driven pressure boosting. Variable-speed motor modulation makes the set a practical clean-water pressure-boosting solution for both new plant rooms and system upgrades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 16 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003cli\u003eAn integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 150 mm manifold connections ready for plant pipework.\u003c\/li\u003e\n\u003cli\u003eVariable speed comes from frequency converters matched to IE5 permanent magnet motors, keeping the booster set in its efficient range.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003eTwo Grundfos CRNE 64-3 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eEach main pump is rated 26 kW (P2), so per-pump draw scales down as speed follows demand.\u003c\/li\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a smartphone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x Grundfos CRNE 64-3 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51425969963255,"sku":"93368445","price":100456.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-2-x-crne-64-3-three-phase-26kw-variable-speed-304ss-booster-pump-set-24l-tank.png?v=1793092644","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-2-x-crne-64-3-three-phase-26kw-variable-speed-304ss-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}