{"product_id":"grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 3 x CRE 10-2 Three Phase 3 x 0.75kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eSites such as mixed-use buildings where a single booster covers retail, offices and apartments require consistent pressure regardless of demand fluctuation; the Hydro Multi-E 3 CRE 10-2 achieves this with three CRE 10-2 pumps operating in parallel. The complete system ships factory assembled and tested under part number 99614386.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 660 L\/min across the system. The pumps can develop up to 28 metres of head when pressure demand increases. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eThe three-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 80 mm manifold connections, valves, sensors and a pressure gauge, plus a 24L diaphragm tank. Electrical supply is 3 x 380-415 V at 50 \/ 60 Hz with a rated current of 5.55 A. The motors have IP54 protection and the system is rated to 10 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eTypical duty sits with industrial process supply, schools and universities and aged-care complexes. It is designed for clean-water pressure boosting where demand varies through the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with IE5 permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eRated 0.75 kW (P2) on every main pump in the frame.\u003c\/li\u003e\n\u003cli\u003eAn integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eCascade logic brings pumps on-line and off-line against changing demand without manual intervention.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003eThe system pairs three CRE 10-2 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 80 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eRated for 10 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eThe system protects its pumps against dry running if the incoming supply is lost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x Grundfos CRE 10-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383701340407,"sku":"99614386","price":24803.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667580","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-0-75kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}