{"product_id":"grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-1-1kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 3 x CRE 10-2 Three Phase 3 x 1.1kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eFor residential towers and medium commercial sites outgrowing their mains pressure, a factory-assembled Hydro Multi-E 3 CRE 10-2 package provides a well-matched solution, with three CRE 10-2 pumps staged against the demand curve. Specify part number 99614309 and the whole set lands tested, assembled and ready for pipework.\u003c\/p\u003e\u003cp\u003eThe system supports flow rates up to 764 L\/min. It can develop up to 28 metres of head for dependable pressure boosting. There is no separate central controller to purchase: Multi-Master control resides within the pumps, either unit can assume the controlling role, and a fault is handed over cleanly without interrupting supply.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 80 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with a rated current of 7.11 A. Motors are protected to IP54, while maximum system pressure is 10 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eIts home ground covers industrial process supply, aged-care complexes and hotel plant rooms. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo external controller required: Multi-Master redundancy lets either pump assume the controlling role.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 80 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eRated for 10 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003eThe controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with IE5 permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eCascade logic brings pumps on-line and off-line against changing demand without manual intervention.\u003c\/li\u003e\n\u003cli\u003eThe system protects its pumps against dry running if the incoming supply is lost.\u003c\/li\u003e\n\u003cli\u003eSlow-speed duty and staged switching keep consumption down through low-demand hours.\u003c\/li\u003e\n\u003cli\u003eThree Grundfos CRE 10-2 pumps share the boosting work in parallel.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eRated 1.1 kW (P2) on every main pump in the frame.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x Grundfos CRE 10-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383699931383,"sku":"99614309","price":24373.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-1-1kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667520","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-3-x-cre-10-2-three-phase-1-1kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}