{"product_id":"grundfos-hydro-multi-e-3-x-cre-32-2-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 3 x CRE 32-2 Three Phase 3 x 5.5kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eThe Hydro Multi-E 3 CRE32-2 is a proven fit for stadium amenities and convention centres that fill to the brim in short bursts, with three Grundfos CRE 32-2 pumps staged automatically as demand varies. Specify part number 93320237 and the whole set lands tested, assembled and ready for pipework.\u003c\/p\u003e\u003cp\u003eThe system supports flow rates up to 2317 L\/min. It can develop up to 57 metres of head for dependable pressure boosting. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 150 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with a rated current of 40.9 A. Motors are protected to IP54, while maximum system pressure is 10 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eIts home ground covers industrial process supply, high-rise apartments and schools and universities. The variable-speed system suits clean-water boosting duties with changing demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Grundfos GO compatibility supports configuration, logging and diagnostics from a phone.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eFrequency converters on the motors pair with IE5 permanent magnet motors for efficient part-load operation.\u003c\/li\u003e\n\u003cli\u003eFactory assembled and wet-tested, the set arrives pre-configured for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003ePumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.\u003c\/li\u003e\n\u003cli\u003ePower use precisely tracks demand, avoiding the waste of fixed-speed alternates.\u003c\/li\u003e\n\u003cli\u003eStainless steel manifolds provide two 150 mm manifold connections ready for pipework.\u003c\/li\u003e\n\u003cli\u003eThe system protects its pumps against dry running if the incoming supply is lost.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003cli\u003eThree Grundfos CRE 32-2 vertical multistage pumps run in parallel on one common base frame.\u003c\/li\u003e\n\u003cli\u003eAt P2 each main pump is 5.5 kW, covering the duty without oversizing the frame.\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure of 10 bar with motors sealed to IP54.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x Grundfos CRE 32-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383694000375,"sku":"93320237","price":55977.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-3-x-cre-32-2-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667391","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-3-x-cre-32-2-three-phase-5-5kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}