{"product_id":"grundfos-hydro-multi-e-3-x-cre-64-2-2-three-phase-11kw-variable-speed-booster-pump-set-24l-tank","title":"Grundfos Hydro Multi-E 3 x CRE 64-2-2 Three Phase 3 x 11kW Variable Speed Booster Pump Set with 24L Tank","description":"\u003cp\u003eIndustrial wash-down lines and fire-ring make-up feeds running flat out rely on booster systems with no tolerance for pressure variation, and the Hydro Multi-E 3 CRE64-2-2 is engineered for exactly that duty. The complete system ships factory assembled and tested under part number 93320267.\u003c\/p\u003e\u003cp\u003eIt handles flows up to 4847 L\/min across the system. The pumps can develop up to 58 metres of head when pressure demand increases. Because every pump carries its own frequency converter and the Multi-Master software elects the controlling pump itself, losing a control unit or pressure sensor means seamless handover rather than a shutdown.\u003c\/p\u003e\u003cp\u003eFactory assembled on a common base, the set combines stainless steel pipework, two 200 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 \/ 60 Hz with a rated current of 58.7 A. Motors are protected to IP54, while maximum system pressure is 10 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 10 bar.\u003c\/p\u003e\u003cp\u003eExpect it on mixed-use commercial buildings and schools and universities sites, plus industrial process supply duties. It provides clean-water pressure boosting for both new plant rooms and refits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVariable speed comes from frequency converters matched to IE5 permanent magnet motors, keeping the booster set in its efficient range.\u003c\/li\u003e\n\u003cli\u003eSetup and monitoring run through the Grundfos GO app rather than a panel visit.\u003c\/li\u003e\n\u003cli\u003eThe package is wet-tested and pre-configured, requiring only pipework and power on site.\u003c\/li\u003e\n\u003cli\u003eConstant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.\u003c\/li\u003e\n\u003cli\u003eThe set ships with an 24L precharged diaphragm tank for low-flow stability.\u003c\/li\u003e\n\u003cli\u003eThe system pairs three CRE 64-2 pumps in parallel duty, controlled as a single coordinated system.\u003c\/li\u003e\n\u003cli\u003ePump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.\u003c\/li\u003e\n\u003cli\u003eRated for 10 bar system pressure; motors carry IP54 protection.\u003c\/li\u003e\n\u003cli\u003eEnergy draw matches the actual job because speed follows demand, not a fixed curve.\u003c\/li\u003e\n\u003cli\u003eDry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.\u003c\/li\u003e\n\u003cli\u003eThe stainless steel manifold assembly is supplied with two 200 mm manifold connections.\u003c\/li\u003e\n\u003cli\u003eRated 11 kW (P2) on every main pump in the frame.\u003c\/li\u003e\n\u003cli\u003eMulti-Master redundancy means either pump can act as controller, with seamless changeover on fault.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x Grundfos CRE 64-2 vertical multistage pumps\u003c\/li\u003e\n\u003cli\u003eIE5 permanent magnet motors with integrated frequency converters\u003c\/li\u003e\n\u003cli\u003eStainless steel suction manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel discharge manifold\u003c\/li\u003e\n\u003cli\u003eNon-return valves\u003c\/li\u003e\n\u003cli\u003eIsolation valves\u003c\/li\u003e\n\u003cli\u003ePressure sensors\/transmitters\u003c\/li\u003e\n\u003cli\u003ePressure gauge\u003c\/li\u003e\n\u003cli\u003e24L diaphragm pressure tank\u003c\/li\u003e\n\u003cli\u003eFactory assembled and tested booster system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":51383696425207,"sku":"93320267","price":88312.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0927\/0116\/3767\/files\/grundfos-hydro-multi-e-3-x-cre-64-2-2-three-phase-11kw-variable-speed-booster-pump-set-24l-tank.png?v=1792667441","url":"https:\/\/foundationpumps.com.au\/products\/grundfos-hydro-multi-e-3-x-cre-64-2-2-three-phase-11kw-variable-speed-booster-pump-set-24l-tank","provider":"Foundation Pumps","version":"1.0","type":"link"}