Roll over image to zoom
SKU: ESHS80-200/300
Lowara ESHS80 200/300 Stainless Steel Stub Shaft Centrifugal Pump for Clean Water with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Integrating cleanly into high-demand commercial infrastructure, this single stage end suction pump provides dependable fluid scaling for clean water distribution networks. Facility engineers utilize this unit to distribute utility liquids across heavy process lines, maintaining precise environmental tolerances within complex manufacturing architectures.
Output capacities outline a Max Head reaching approximately 62.4 m alongside a Max Flow of approximately 3750 L/Min. The electrical framework mandates a 415v three-phase power source, drawing 50.8 Amps to operate the 30.0 kW motor. The flanged piping configuration consists of a 100 mm axial suction inlet and an 80 mm radial discharge port.
Fluid motion is directed through a precisely machined single stage centrifugal chamber utilizing an end-suction geometry. The mechanical assembly utilizes a rigid stub shaft bracket that keys the standard motor extension directly to the enclosed impeller. This approach promotes excellent suction lift capabilities and stable flow behaviour throughout extended operational runtimes.
To prevent material degradation and chemical wear, the housing and internal elements are crafted from cast stainless steel (1.4408). The sealing block features a Ceramic/Carbon mechanical seal paired with FKM elastomers. The entire unit operates safely under an IP55 protection degree, accommodating fluid temperatures from -10 °C to +120 °C.
FEATURES
- Single stage end suction hydraulic design for balanced transfer
- Stub shaft rigid coupling utilizing a specialized adapter bracket
- Cast stainless steel (1.4408) wetted components
- Standardized Ceramic, Carbon, and FKM mechanical seal assembly
- IP55 enclosed motor protection degree for industrial safety
- Flanged configuration with 100 mm inlet and 80 mm outlet
- Supported operating liquid temperatures scaling up to +120 °C
SPECIFICATIONS
| Max Flow | 3750 L/Min |
| Max Head | 62.4 m |
| Power | 30 kW / 415v |
| Rated Current | 50.8 Amps |
| Suitable For | Industrial Process |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -10°C to +120°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under severe operating service, what operating pressure rating and liquid temperature boundaries apply to this stainless steel end-suction centrifugal pump?
Enduring across industrial piping systems, the ESHS80-200/300 provides a maximum working pressure rating of 12 bar (PN 12) across certified temperatures from -10°C to +120°C.
Under full rotational drive, what peak dynamic elevation head does this stainless steel end-suction centrifugal pump sustain?
Circulating through distribution piping lines, the ESHS80-200-300 maintains a maximum dynamic head of approximately 62.4 m across vertical piping.
Through its hydraulic outlet connection, what maximum delivery volume and pipe sizing does this stainless steel end-suction centrifugal pump achieve?
Releasing through designated connection lines, the ESHS80 200 300 outputs a peak liquid flow volume of approximately 3750 L/Min through DN 100 suction and DN 80 discharge flanged ports.
What metallurgy standards and mechanical seal materials protect this stainless steel end-suction centrifugal pump from corrosive chemical attack?
Specified for demanding fluid environments, the ESHS80_200_300 utilizes alloy construction of AISI 316 stainless steel pump casing, diffusers, and closed impellers backed by mechanical face seals to prevent fluid corrosion.
How much electrical motor power in kilowatts and what supply voltage current feed are specified on this stainless steel end-suction centrifugal pump?
Built from dedicated power supplies, the ESHS80-200/300 operates via an electric motor rated at 30 kW (40.0 HP) on a supply voltage of 380–415 V, 50 Hz, three-phase at 50.8 A.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us