Roll over image to zoom
SKU: NSCS32-125/30
Lowara NSCS32 125/30 Stainless Steel Rigid Coupled Centrifugal Pump for Water Handling with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Specifically built to combat flow restrictions in commercial networks, the Lowara NSCS32-125/30 acts as a highly dependable pressure boosting unit. Its powerful structural mechanics ensure optimal line pressure is maintained throughout complex building services.
Drawing power from a 3.0 kW / 415v three-phase motor, this system pushes a maximum head of approximately 28.4 m and processes a maximum flow of approximately 684 L/Min. The housing features a 50 mm suction port alongside a 32 mm discharge port for standard pipeline integration.
The hydraulic configuration is engineered to handle elevated operational stress. Its specific internal geometry ensures rapid pressure accumulation without inducing destructive cavitation, creating a seamless and consistent volumetric output during heavy load cycles.
Mechanically secured with a rigid stub shaft adapter, it pairs a rugged Cast Iron casing with a Fabricated Stainless Steel (AISI 316) impeller. Ready for demanding environments, it operates safely with liquids up to +120 °C and is fully shielded by IP55 motor protection.
FEATURES- Rigid adapter-mounted stub shaft mechanics
- Premium Cast Iron external volute housing
- Fabricated AISI 316 Stainless Steel impeller
- IP55 protected three-phase electrical motor
- High-efficiency pressure-focused hydraulic profile
- Interchangeable mechanical seal architecture
- Safe handling of liquid temperatures up to +120 °C
SPECIFICATIONS
| Max Flow | 684 L/Min |
| Max Head | 28.4 m |
| Power | 3 kW / 415v |
| Rated Current | 5.82 Amps |
| Suitable For | Industrial Process and Water Supply |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 50 mm |
| Outlet Size | 32 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
In commercial pumping service, what operating pressure boundaries and fluid temperature are rated for this flanged end-suction centrifugal pump?
Rated under demanding fluid temperatures, the NSCS32-125/30 delivers a maximum working pressure capability of 16 bar (PN 16) across fluid temperatures from -25°C to +120°C.
Under peak operation, what vertical head and fluid lift elevation does this flanged end-suction centrifugal pump develop?
Elevating across building service lines, the NSCS32-125-30 sustains a peak dynamic head of approximately 28.4 m to propel clean liquid upward.
What maximum flow volume in liters per minute and connection port dimensions are rated for this flanged end-suction centrifugal pump?
Supplying across facility piping networks, the NSCS32 125 30 maintains a maximum discharge flow rate of approximately 684 L/Min utilizing DN 50 suction and DN 32 discharge flanged ports.
Under corrosive fluid exposure, what alloy construction and mechanical seal protect this flanged end-suction centrifugal pump?
Constructed with corrosion-resistant alloy materials, the NSCS32_125_30 ensures alloy metallurgy protection with cast iron casing with stainless steel closed impellers and precision mechanical face seals against corrosion.
Under standard facility electrical service, what operating voltage and motor kilowatt rating apply to this flanged end-suction centrifugal pump?
Energized by facility power panels, the NSCS32-125/30 runs on an electric motor rated at 3 kW (4.0 HP) supplied by 380–415 V, 50 Hz, three-phase at a current of 11.0 / 6.33 A.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us