Roll over image to zoom
SKU: NSCS50-125/30
Lowara NSCS50 125/30 Stainless Steel Stub Shaft Centrifugal Pump for Water Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Centralized water supply systems require steady hydraulic distribution to support daily facility operations. The Lowara NSCS50-125/30 end-suction centrifugal pump is designed to integrate into these commercial networks, providing consistent liquid transfer across extended operating cycles.
Operating on a 415v three-phase supply, this unit features a 3.0 kW motor that draws a rated current of 5.82 Amps. It achieves a maximum head of approximately 16.2 m and delivers a peak flow capacity of 1326 L/Min. Installation is supported by standardized 65 mm suction and 50 mm discharge flanged connections.
The internal hydraulic design utilizes a balanced closed impeller to regulate fluid acceleration and minimize intake turbulence. This configuration helps establish a predictable circulation rhythm, making it suitable for multi-branch plumbing arrays that demand stable pressure.
Wetted components are manufactured from fabricated AISI 316 stainless steel, allowing the pump to handle liquid temperatures ranging from -25°C to +120°C. The exterior chassis includes a sealed electrical enclosure and mechanical seal arrangements that protect the central rotating shaft from atmospheric moisture.
FEATURES
- Rigid close-coupled stub shaft mounting supports proper mechanical alignment under standard operational loads
- Back pull-out volute design allows internal component inspection without disconnecting adjacent pipework
- TEFC motor enclosure shields internal stator windings from ambient dust ingress
- Replaceable wear rings protect the primary hydraulic chamber from abrasive particulate damage
- Pre-drilled base supports enable vibration-minimizing anchoring to concrete foundational pads
- Galvanized carbon steel hardware secures the main casing to maintain structural stability
- Optimized discharge geometry limits internal friction to support overall mechanical efficiency
SPECIFICATIONS
| Max Flow | 1326 L/Min |
| Max Head | 16.2 m |
| Power | 3 kW / 415v |
| Rated Current | 5.82 Amps |
| Suitable For | Water Distribution |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Across facility piping runs, what maximum working pressure in bar and temperature range apply to this flanged end-suction centrifugal pump?
Maintaining within certified pressure boundaries, the NSCS50-125/30 delivers a maximum working pressure capability of 16 bar (PN 16) across fluid temperatures from -25°C to +120°C.
How much vertical head push does this flanged end-suction centrifugal pump provide under demand?
Pushing in commercial piping networks, the NSCS50-125-30 sustains a peak dynamic head of approximately 16.2 m to propel clean liquid upward.
What peak fluid delivery volume and discharge pipe diameter are engineered into this flanged end-suction centrifugal pump?
Circulating into plant fluid networks, the NSCS50 125 30 maintains a maximum discharge flow rate of approximately 1326 L/Min utilizing DN 65 suction and DN 50 discharge flanged ports.
In commercial fluid transfer, what metallurgy specifications and mechanical seals protect this flanged end-suction centrifugal pump against corrosion?
Assembled against corrosive liquid exposure, the NSCS50_125_30 ensures alloy metallurgy protection with cast iron casing with stainless steel closed impellers and precision mechanical face seals against corrosion.
For secure electrical hookup, what operating voltage current and motor kilowatt rating apply to this flanged end-suction centrifugal pump?
Electrified under steady electrical current, the NSCS50-125/30 runs on an electric motor rated at 3 kW (4.0 HP) supplied by 380–415 V, 50 Hz, three-phase at a current of 5.82 A.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us