Roll over image to zoom
SKU: NSCS50-160/55
Lowara NSCS50 160/55 Stainless Steel Heavy Duty Centrifugal Pump for Utility Networks with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Large-scale utility networks rely on stable pressure regulation to distribute water across expansive infrastructure. The Lowara NSCS50-160/55 high-capacity centrifugal unit acts as a mechanical driver for industrial water boosting, providing steady fluid delivery for commercial layouts.
Delivery output features a maximum head rating of approximately 26.2 m and a volume output reaching 1326 L/Min. Powered by a 415v three-phase electrical framework, the 5.5 kW motor registers 10.7 Amps during standard operation. Plumbing connectivity utilizes a 65 mm suction flange paired with a 50 mm discharge flange.
The internal pathways are shaped to restrict intake cavitation and promote smooth pressurized distribution. By managing directional water momentum, the pump produces a predictable flow velocity that supports industrial layouts without experiencing disruptive energy losses.
Constructed from fabricated AISI 316 stainless steel, the wetted elements tolerate operational fluid temperatures ranging between -25°C and +120°C. The exterior incorporates thermal insulation materials and structural bracing to maintain electrical safety over extended continuous lifespans.
FEATURES
- Close-coupled motor adapter bracket removes the need for complex field alignment procedures during installation
- Innovative back pull-out assembly isolates the rotating elements for rapid technical inspection
- Thickened volute geometry safely absorbs the hydraulic shock common in centralized plumbing grids
- Industrial-grade insulation protects the internal stator windings against operational heat generation
- Interchangeable mechanical seal arrangement accommodates varied industrial fluids for widespread facility versatility
- Galvanized carbon steel hardware fastens the primary casing structure to prevent mechanical shifting
- Cast iron drive bracket supplies structural rigidity for the attached high-voltage assembly
SPECIFICATIONS
| Max Flow | 1326 L/Min |
| Max Head | 26.2 m |
| Power | 5.5 kW / 415v |
| Rated Current | 10.7 Amps |
| Suitable For | Commercial Water Supply |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Regarding power feed requirements, what motor power in kilowatts and operating voltage draw apply to this flanged end-suction centrifugal pump?
Supplied from standard electrical distribution, the NSCS50-160/55 connects to 380–415 V, 50 Hz, three-phase with an electric motor rated at 5.5 kW (7.5 HP) requiring 10.7 A.
How much working pressure in bar and what liquid temperature tolerances are supported by this flanged end-suction centrifugal pump?
Engineered across commercial fluid lines, the NSCS50-160-55 supports a maximum working pressure capability of 16 bar (PN 16) and liquid temperatures from -25°C to +120°C.
What peak elevation head can be attained when this flanged end-suction centrifugal pump pumps vertically?
Overcoming through tall plumbing risers, the NSCS50 160 55 generates a peak dynamic lift head of approximately 26.2 m under upward push.
What maximum flow rate in liters per minute and pipe connection sizing are certified for this flanged end-suction centrifugal pump?
Delivering through primary discharge ports, the NSCS50_160_55 discharges a maximum delivery flow volume of approximately 1326 L/Min utilizing DN 65 suction and DN 50 discharge flanged ports.
What corrosion-resistant metallurgy standards and mechanical face seal materials are specified for this flanged end-suction centrifugal pump?
Configured for aggressive liquid service, the NSCS50-160/55 combines alloy metallurgy of cast iron casing with stainless steel closed impellers with precision mechanical seals to defend against chemical attack.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us