Roll over image to zoom
SKU: NSCS50-160/75
Lowara NSCS50 160/75 Stainless Steel Single Stage Centrifugal Pump for Plumbing Networks with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Industrial water supply networks require consistent fluid transfer to maintain daily operations. The Lowara NSCS50-160/75 end-suction centrifugal pump is designed to integrate into commercial plumbing systems, providing steady hydraulic distribution.
Operating on a 415v three-phase supply, this unit features a 7.5 kW motor that draws a rated current of 14.2 Amps. It achieves a maximum head of approximately 32.7 m and delivers a peak flow capacity of 1500 L/Min. Installation is supported by standardized 65 mm suction and 50 mm discharge flanged connections.
The internal hydraulic design utilizes a closed impeller to regulate fluid acceleration and minimize intake turbulence. This configuration helps establish a predictable circulation rhythm, making it suitable for multi-branch plumbing arrays that demand stable pressure.
Wetted components are manufactured from fabricated AISI 316 stainless steel, allowing the pump to handle liquid temperatures ranging from -25°C to +120°C. The exterior chassis includes a sealed electrical enclosure and mechanical seal arrangements that protect the central rotating shaft from atmospheric moisture.
FEATURES
- Rigid close-coupled stub shaft mounting supports proper mechanical alignment under standard operational loads
- Back pull-out volute design allows internal component inspection without disconnecting adjacent pipework
- TEFC motor enclosure shields internal stator windings from ambient dust ingress
- Replaceable wear rings protect the primary hydraulic chamber from abrasive particulate damage
- Pre-drilled base supports enable vibration-minimizing anchoring to concrete foundational pads
- Galvanized carbon steel hardware secures the main casing to maintain structural stability
- Optimized discharge geometry limits internal friction to support overall mechanical efficiency
SPECIFICATIONS
| Max Flow | 1500 L/Min |
| Max Head | 32.7 m |
| Power | 7.5 kW / 415v |
| Rated Current | 14.2 Amps |
| Suitable For | Industrial Water Supply |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Across commercial water circuits, what maximum working pressure rating and fluid temperature apply to this flanged end-suction centrifugal pump?
Engineered across industrial piping systems, the NSCS50-160/75 provides a maximum working pressure rating of 16 bar (PN 16) across certified temperatures from -25°C to +120°C.
How much dynamic lift head is achieved by this flanged end-suction centrifugal pump under full output?
Overcoming through distribution piping lines, the NSCS50-160-75 maintains a maximum dynamic head of approximately 32.7 m across vertical piping.
Through its outlet connection, what peak delivery volume and discharge port size are rated for this flanged end-suction centrifugal pump?
Delivering through designated connection lines, the NSCS50 160 75 outputs a peak liquid flow volume of approximately 1500 L/Min through DN 65 suction and DN 50 discharge flanged ports.
To defend internal components, what alloy metallurgy and mechanical seals prevent corrosion in this flanged end-suction centrifugal pump?
Configured for demanding fluid environments, the NSCS50_160_75 utilizes alloy construction of cast iron casing with stainless steel closed impellers backed by mechanical face seals to prevent fluid corrosion.
How is this flanged end-suction centrifugal pump energized regarding motor kilowatt rating and electrical line voltage current?
Supplied from dedicated power supplies, the NSCS50-160/75 operates via an electric motor rated at 7.5 kW (10.0 HP) on a supply voltage of 380–415 V, 50 Hz, three-phase at 14.2 A.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us