Roll over image to zoom
SKU: NSCS50-200/150
Lowara NSCS50 200/150 Stainless Steel End Suction Centrifugal Pump for Utility Networks with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Large-scale utility networks rely on steady pressure regulation to distribute water across commercial infrastructure. The Lowara NSCS50-200/150 end-suction centrifugal pump acts as a mechanical driver for facility water distribution, providing consistent fluid delivery for centralized plumbing systems.
Delivery output features a maximum head rating of approximately 54.3 m and a peak flow capacity reaching 1500 L/Min. Powered by a 415v three-phase electrical framework, the 15 kW motor registers 26.1 Amps during standard operation. Plumbing connectivity utilizes a 65 mm suction flange paired with a 50 mm discharge flange.
The internal hydraulic layout utilizes a closed impeller to regulate fluid acceleration and minimize intake turbulence. This specific configuration helps establish a predictable circulation rhythm, making it suitable for multi-branch plumbing arrays that demand stable pressure.
Wetted components are manufactured from fabricated AISI 316 stainless steel, allowing the pump to handle liquid temperatures ranging from -25°C to +120°C. The exterior chassis includes a sealed electrical enclosure and mechanical seal arrangements that protect the central rotating shaft from ambient moisture.
FEATURES
- Rigid close-coupled stub shaft mounting supports mechanical alignment under operational loads
- Back pull-out volute design allows internal component inspection without disconnecting adjacent pipework
- TEFC motor enclosure shields internal stator windings from ambient dust ingress
- Replaceable wear rings protect the primary hydraulic chamber from abrasive particulate damage
- Pre-drilled base supports enable vibration-minimizing anchoring to concrete foundational pads
- Galvanized carbon steel hardware secures the main casing to maintain structural stability
- Class 155 (F) insulation protects the internal copper windings against operating heat generation
SPECIFICATIONS
| Max Flow | 1500 L/Min |
| Max Head | 54.3 m |
| Power | 15 kW / 415v |
| Rated Current | 26.1 Amps |
| Suitable For | Water Distribution |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
For dependable hydraulic operation, what operating pressure rating and liquid thermal limits apply to this flanged end-suction centrifugal pump?
Configured under demanding fluid temperatures, the NSCS50-200/150 delivers a maximum working pressure capability of 16 bar (PN 16) across fluid temperatures from -25°C to +120°C.
How high can clean fluid be propelled upward by this flanged end-suction centrifugal pump?
Generating across building service lines, the NSCS50-200-150 sustains a peak dynamic head of approximately 54.3 m to propel clean liquid upward.
What maximum liquid delivery volume and pipe connection sizing are provided by this flanged end-suction centrifugal pump?
Piping across facility piping networks, the NSCS50 200 150 maintains a maximum discharge flow rate of approximately 1500 L/Min utilizing DN 65 suction and DN 50 discharge flanged ports.
Regarding material resilience, what alloy composition and mechanical seal faces protect this flanged end-suction centrifugal pump against corrosion?
Produced with corrosion-resistant alloy materials, the NSCS50_200_150 ensures alloy metallurgy protection with cast iron casing with stainless steel closed impellers and precision mechanical face seals against corrosion.
Under facility electrical demand, what operating voltage current and motor kilowatt power run this flanged end-suction centrifugal pump?
Actuated by facility power panels, the NSCS50-200/150 runs on an electric motor rated at 15 kW (20.0 HP) supplied by 380–415 V, 50 Hz, three-phase at a current of 26.1 A.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us