Roll over image to zoom
SKU: NSCS65-160/185
Lowara NSCS65 160/185 Cast Iron Horizontal Centrifugal Pump for Industrial Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Large-scale utility networks rely on stable pressure regulation to distribute water across expansive infrastructure. The Lowara NSCS65-160/185 high-capacity centrifugal unit acts as a mechanical driver for industrial water boosting, providing steady fluid delivery for commercial layouts.
Delivery output features a maximum head rating of approximately 44.3 m and a volume output reaching 2940 L/Min. Powered by a 415v three-phase electrical framework, the 18.5 kW motor registers 32.7 Amps during standard operation. Plumbing connectivity utilizes an 80 mm suction flange paired with a 65 mm discharge flange.
The internal pathways are shaped to restrict intake cavitation and promote smooth pressurized distribution. By managing directional water momentum, the pump produces a predictable flow velocity that supports industrial layouts without experiencing disruptive energy losses.
Constructed from cast iron, the wetted elements tolerate operational fluid temperatures ranging between -25°C and +120°C. The exterior incorporates thermal insulation materials and structural bracing to maintain electrical safety over extended continuous lifespans.
FEATURES
- Close-coupled motor adapter bracket removes the need for complex field alignment procedures during installation
- Innovative back pull-out assembly isolates the rotating elements for rapid technical inspection
- Thickened volute geometry safely absorbs the hydraulic shock common in centralized plumbing grids
- Industrial-grade insulation protects the internal stator windings against operational heat generation
- Interchangeable mechanical seal arrangement accommodates varied industrial fluids for widespread facility versatility
- Galvanized carbon steel hardware fastens the primary casing structure to prevent mechanical shifting
- Cast iron drive bracket supplies structural rigidity for the attached high-voltage assembly
SPECIFICATIONS
| Max Flow | 2940 L/Min |
| Max Head | 44.3 m |
| Power | 18.5 kW / 415v |
| Rated Current | 32.7 Amps |
| Suitable For | Industrial Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 80 mm |
| Outlet Size | 65 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
For reliable power installation, what motor kilowatt rating and electrical supply voltage feed run this flanged end-suction centrifugal pump?
Connected under steady electrical current, the NSCS65-160/185 connects to 380–415 V, 50 Hz, three-phase with an electric motor rated at 18.5 kW (25.0 HP) requiring 32.70 A.
What operating pressure capability in bar and permissible liquid temperature range are specified for this flanged end-suction centrifugal pump?
Tested within certified pressure boundaries, the NSCS65-160-185 supports a maximum working pressure capability of 16 bar (PN 16) and liquid temperatures from -25°C to +120°C.
Under full hydraulic flow, what peak elevation head does this flanged end-suction centrifugal pump sustain?
Rising in commercial piping networks, the NSCS65 160 185 generates a peak dynamic lift head of approximately 44.3 m under upward push.
What peak flow rating in liters per minute and connection sizing are engineered into this flanged end-suction centrifugal pump?
Feeding into plant fluid networks, the NSCS65_160_185 discharges a maximum delivery flow volume of approximately 2940 L/Min utilizing DN 80 suction and DN 65 discharge flanged ports.
Regarding metallurgy durability, what alloy materials and mechanical seal faces are specified for this flanged end-suction centrifugal pump?
Crafted against corrosive liquid exposure, the NSCS65-160/185 combines alloy metallurgy of cast iron casing with stainless steel closed impellers with precision mechanical seals to defend against chemical attack.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us