Roll over image to zoom
SKU: 93207154
Grundfos NB 32-160.1/139 Cast Iron 1.5 kW End Suction Centrifugal Pump with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Driven by a 1.5 kW electric motor, the NB 32-160.1/139 end-suction centrifugal pump features an axial suction port (DN 50) and a radial discharge port (DN 32). Specified for commercial HVAC circulation, district heating installations, and industrial process water distribution, the pump mounts securely onto floor inertia bases in mechanical plant rooms.
Hydraulic wet-end output delivers a rated flow volume of 262 L/Min with a maximum operational head limit of 19.04 m. The EN-GJL-250 cast iron casing receives cataphoresis electrocoating to limit surface oxidation. Inside, a stainless steel impeller works alongside bronze wear rings and a BQQE shaft seal. Physical net weight measures 45 kg.
Electrical power for the NB 32-160.1/139 model is supplied by a 415 V three-phase electric motor rated at 1.5 kW output power. Nominal operating current draw measures 5.49 Amps during full load operations. Operating liquid temperatures span from -25°C to 120°C under 16 bar working pressure. Suction inlet measures DN 50 with a DN 32 discharge port.
Motor protection on the NB 32-160.1/139 pump complies with IP55 enclosure standards to resist dust and moisture ingress, supported by Class F thermal insulation and internal PTC thermistors. The back-pull-out casing layout allows service personnel to remove the motor drive and rotor assembly without unbolting the pump volute from system suction and discharge piping headers.
Features
- Integrally cast suction and discharge ports with dedicated vent and drain ports provide direct connection points without additional fittings.
- No baseplate or grouting required to maintain correct shaft alignment and vibration levels within Hydraulic Institute standards.
- Cataphoretic electrocoating on cast iron internal surfaces provides barrier protection against oxidative corrosion in hydronic circulation loops.
- Close-coupled configuration eliminates coupling alignment procedures and reduces overall installation footprint compared to long-coupled alternatives.
- Ball bearing support arrangement accommodates both radial and axial thrust loads generated during continuous duty operation at rated speed.
- PN16 flanged connection ratings on sizes up to and including DN 150 provide elevated working pressure capability beyond standard EN733 10 bar ratings.
- O-ring seal between pump housing and cover eliminates leakage risk at the volute-to-cover joint under sustained operating pressures.
IMPORTANT:Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 262 L/Min |
| Max Head | 19.04 m |
| Power | 1.5 kW / 415v |
| Rated Current | 5.49 Amps |
| Suitable For | Commercial HVAC Hydronic Circulation |
| Body Material | Cast Iron |
| Liquid Temperature | -25°C to 120°C |
| Inlet Size | 50 mm |
| Outlet Size | 32 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
For heavy plant room service, what metallurgy is specified for the casing and rotating core?
The spiral volute geometry of Grundfos NB 32-160.1/139 is cast from heavy-duty cast iron, complemented by a precision-cast bronze impeller.
What electrical input specifications in kilowatts, line voltage, and full load amps are certified?
Requiring a three-phase 415 V electrical supply, NB 32-160.1/139 operates a 1.5 kW motor drawing 5.49 Amps under peak pumping load.
Across heavy-duty distribution piping, which media temperature limits and pressures are allowed?
Broad temperature support in NB-32-160.1-139 spans fluid operating ranges of -25°C to 120°C, containing working pressures up to 10 bar.
Within central utility plant rooms, what dynamic elevation rating is certified for this unit?
Supporting heavy floor-mounted piping, NB 32 160.1 139 achieves a peak dynamic elevation of approximately 19.04 m.
Delivering high volumetric fluid momentum, what maximum delivery throughput can be attained?
Delivering high volumetric fluid momentum, NB/32/160.1/139 discharges a maximum liquid volume of approximately 262 L/Min.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us