Roll over image to zoom
SKU: ZN622/12
Lowara ZN622/12 Stainless Steel Deep Well 6" Submersible Bore Pump (Wet End Only) with Radial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Specifying a standalone hydraulic assembly, the Lowara ZN622/12 represents a wet end within the Z6 Series. Operating this wet end requires secure coupling with a compatible 11 kW electric motor of the appropriate power rating. Designed for secure installation inside standard 6-inch deep wells, the assembly operates inside standard casings. It is suitable for groundwater supply and irrigation systems, municipal supply lines, and agricultural distribution projects.
To support long-term physical stability during operation, the structural sleeve and discharge head are engineered from cast AISI 316 Stainless Steel. The multi-stage centrifugal hydraulic assembly consists of 12 stages, each incorporating an AISI 316L stainless steel radial impeller. The integrated radial impellers are designed to limit abrasive wear from sand particles, supporting water containing up to 100 g/m³ of suspended sand.
Once paired with its designated 11 kW electric motor (nominal current rating of 23.1 Amps), the coupled assembly achieves up to 161 m maximum head. This multi-stage hydraulic wet end generates a maximum flow of 500 L/Min through its Rp 65 mm threaded connection. All performance parameters are in accordance with manufacturer technical specifications.
The pump has a maximum external diameter of 142 mm for installation inside standard 6-inch borehole wells. Maximum pump immersion depth is 300 m when used with C4S motors and 350 m when used with L6W motors. The lower support bracket incorporates a standard 6" NEMA-compliant mount for simple mechanical motor integration. Safe coupling requires correct mechanical alignment of the pump shaft and the motor shaft during mechanical coupling.
FEATURES
- Constructed entirely from AISI 316 Stainless Steel for corrosion protection and structural durability.
- Equipped with 12 multi-stage radial centrifugal impellers manufactured from AISI 316L stainless steel.
- Includes an integrated spring-loaded AISI 316 non-return valve in the discharge head to prevent backflow and maintain system pressure.
- Features a high-strength Duplex Stainless Steel pump shaft and sleeves.
- Equipped with a standard 6" NEMA-compliant motor support bracket and coupling for easy motor integration.
- ErP/Ecodesign compliant with a Minimum Efficiency Index (MEI) of 0.40 or higher, optimizing energy performance.
- Designed with a compact 142 mm maximum external diameter for secure installation inside 6-inch deep well boreholes.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How far can this borehole unit push water vertically out of deep subterranean shafts?
Reliable lifting across deep well risers is ensured by the ZN622/12, which develops a peak dynamic head of approximately 161 m during operation.
What size riser connects to the discharge port and how much water volume is discharged?
Surface piping attaches to the integrated Rp 2 1/2" (65 mm) outlet, through which the ZN622-12 delivers a peak flow capacity of approximately 500 L/Min in standard 6-inch borehole installations.
How is this submersible bore pump protected against corrosion from well chemistry?
Withstanding demanding aquifer chemistry, the ZN 622 12 is built with AISI 316 stainless steel pump end, AISI 316L stainless steel impellers and diffusers with removable wear rings, Duplex UNS S 31803 shaft, and Duplex UNS S 32304 coupling and maintains high tolerance against sand up to 100 g/m³.
Which electrical supply voltage and motor kilowatt rating are specified for this unit?
Electrical demands for operating the ZN_622_12 specify a 6-inch NEMA L6W motor connection of 11 kW on 380–415 V, 50 Hz, three-phase with 23.1 A full current.
Is an internal check valve built into the top casing and can this unit mount horizontally?
Backflow elimination is achieved in the ZN622/12 via an integrated stainless steel non-return valve in the delivery port, allowing horizontal placement at a minimum recommended 3° incline with the motor positioned lowest.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us