Roll over image to zoom
SKU: 96047457
Grundfos SEV.80.80.75.2.50B Cast Iron 2-Pole Submersible Pump for Pump Stations with SuperVortex Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Structural foundation in municipal wastewater systems is provided by the heavy-duty cast iron housing and motor shell of the SEV.80.80.75.2.50B. This submersible pump addresses requirements for the removal of contaminated grey water with a pH value between 4 and 10 and temperatures up to 40°C. This unit is intended for sewage collection systems and municipal networks where reliable solids passage and continuous operation are necessary for maintenance. The system maintains stable performance in both submerged and dry installation environments prone to varying fluid ingress.
Hydraulic capacity is provided by a 7.5 kW motor operating on a 415v three-phase supply with a rated current of 15 Amps. This model achieves a maximum flow of 1500 L/Min and reaches a maximum head of 34.3 m to overcome elevation requirements in pressurized sewer mains. The motor operates at 2940 rpm, maintaining torque and circulation characteristics throughout the service cycle in treatment plant transfer duties. Electrical connection is established via a 15-metre Lyniflex power cable, facilitating distribution for sub-surface wastewater handling and pump stations.
Internal centrifugal design utilizes a SuperVortex impeller configuration to facilitate the passage of solids up to 80 mm in diameter. This configuration handles sewage and wastewater in suspension, maintaining volumetric throughput and preventing the internal clogging that could compromise the rotating assembly. By creating a vortex flow within the pump housing, the design reduces internal wear and vibration for the rotating assembly during prolonged discharge. The hydraulic setup is intended for the movement of contaminated liquids through drainage stations and municipal lift stations.
Mechanical stability is achieved through an IP68 enclosure rating and a double mechanical shaft seal arrangement in an oil bath. The primary SiC/SiC seal and secondary CER/CARNBR seal protect the electrical heart from liquid ingress in submerged conditions. This unit includes moisture and water-in-oil sensors for early fault detection and protection against overheating. The casting includes a DN 80 inlet and a DN 80 outlet, ensuring structural integrity for permanent wastewater infrastructure and treatment plant transfer duties.
Features
- SuperVortex impeller configuration facilitates the passage of solids up to 80 mm without internal clogging.
- Heavy-duty cast iron housing and motor shell provide a durable foundation for dry and submerged site installations.
- Maximum head performance of 34.3 m allows for wastewater discharge in municipal and industrial applications.
- Double mechanical shaft seal in an oil bath with silicon carbide faces ensures protection for the 7.5 kW motor.
- Integrated moisture and water-in-oil sensors facilitate proactive monitoring and early detection of seal ingress.
- Standard 15-metre Lyniflex power cable provides a secure, oil-resistant connection for deep pit sewage pumping.
- DN 80 inlet and DN 80 outlet connections allow for high-volume wastewater transfer through standard plumbing.
SPECIFICATIONS
| Max Flow | 1500 L/Min |
| Max Head | 34.3 m |
| Power | 7.5 kW / 415v |
| Rated Current | 15 Amps |
| Suitable For | Commercial Wastewater Pumping |
| Body Material | Cast iron |
| Liquid Temperature | Maximum 40°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
When processing raw sewage influxes, what maximum liters per minute does this unit displace?
Processing untreated wastewater, Grundfos SEV.80.80.75.2.50B sustains an evacuation rate of 1500 L/Min.
Throughout high-elevation discharge runs, what peak dynamic lift is reached during active pumping?
Pumping against steep gradients, SEV.80.80.75.2.50B maintains an operational elevation of 34.3 m.
Configured for three-phase lines, which electrical specifications, supply voltage parameters, and full-load amperage run this pump?
Electrical power input for SEV-80-80-75-2-50B is supported by a 7.5 kW motor operating from a three-phase 415 V line drawing 15 Amps.
Preventing fibrous buildup, how does the recessed vortex corridor prevent fibrous contaminants from lodging in this sewage volute?
The hydraulic SuperVortex runner in SEV 80 80 75 2 50B features an open corridor providing 80 mm spherical passage for raw sewage.
Anchoring against discharge thrust, which auto-coupling component connects this pump unit firmly to permanent sump risers?
Service personnel can extract SEV/80/80/75/2/50B easily via overhead crane, as it releases automatically from the auto-coupling pedestal.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us