Roll over image to zoom
SKU: 93637553
Grundfos Hydro MPC-E 2 x CRIE 10-2 Three Phase 2 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Across installations such as gymnasiums, aquatic centres and student housing running wall-to-wall showers, the Hydro MPC-E 2 CRIE 10-2 maintains stable pressure at every draw-off point. The complete system ships factory assembled and tested under part number 93637553.
This set provides up to 523 L/min of flow capacity. Variable-speed operation can develop up to 29.2 metres of head where required. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 6.4 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Typical duty sits with water supply networks, high-rise developments and irrigation schemes. It is designed for clean-water pressure boosting where demand varies through the day.
Features
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- Each main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- The system pairs two CRIE 10-2 pumps in parallel duty, controlled as a single coordinated system.
- A suction-side pressure sensor guards the pumps against dry running.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
What's Included
- 2 x Grundfos CRIE 10-2 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 523 L/Min |
| Max Head | 29 m |
| Power | 2 x 1.5 kW / 415v |
| Rated Current | 6.4 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C to 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What suction and discharge connection fittings are provided across the factory manifold skid?
Header plumbing on the Grundfos Hydro MPC-E 2 CRIE 10-2 V1 GA-A-A-AG provides R 2 1/2" stainless steel suction and discharge connections accompanied by isolating valves and discharge check valves.
Which manufacturer warranty terms apply to the complete packaged booster set?
Protection on the Hydro MPC-E 2 CRIE 10-2 is provided by a comprehensive Grundfos two-year manufacturer warranty with extensive Australian technical service and spare parts support.
How much fluid volume can this parallel multistage pump set discharge during high consumption periods?
Under maximum network draw, the Hydro-MPC-E-2-CRIE-10-2 supplies a peak fluid flow rate of up to 523 L/min across its variable speed centrifugal stages.
How is electrical propulsion and variable speed control provided across the parallel pump set?
Propulsion across the Hydro MPC E 2 CRIE 10 2 is supplied by two variable frequency drive MGE electric motors rated at 1.5 kW each, operating on a 3 x 400 V electrical supply with integrated frequency converters for precise pressure control.
Which maximum dynamic head does this parallel booster set achieve during full duty pumping?
For vertical pressure boosting, the 2 CRIE 10-2 (Hydro MPC-E) produces up to 29.2 m total elevation head with a 16 bar maximum working pressure envelope.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us