Roll over image to zoom
SKU: BS1F 1MXHL 406
Calpeda BS1F 1MXHL 406 Three Phase 1.5kW Fixed Speed Single Pump Multistage Booster System
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Sustaining high-volume water delivery to upper floors of commercial towers or expansive industrial sites requires a high-head, high-flow booster. Utilizing 1 Calpeda MXHL 406 horizontal multistage pump, the BS1F 1MXHL 406 package achieves flow rates up to 133.3 L/Min. To support elevated outlets and long pipe runs, the package can deliver up to 63 m of head. Its heavy-duty single-pump configuration ensures dependable pressure reinforcement across tall vertical risers and long pipe runs.
Precise pressure management is handled by calibrated differential pressure switches connected to an onboard microprocessor control board. When downstream demand opens the circuit, the processor engages the drive smoothly and applies anti-hunting delays to prevent rapid start-stop oscillations. Built-in diagnostic safeguards continuously watch for dry running or electrical anomalies to protect the mechanical seal and motor windings.
Constructed entirely from stainless steel AISI 304 headers, the manifold assembly pairs a 32 mm suction inlet with a 25 mm discharge outlet. Full-bore isolation ball valves and an integrated non-return check valve allow technicians to isolate the pump easily while preventing reverse flow surges. A direct-reading system pressure gauge and a dedicated connection port for an external diaphragm vessel complete the hydraulic layout.
Designed for a standard three-phase 415 V mains supply, the unit employs an industrial motor with a three-phase 230/400 V winding rating. The 2-pole induction motor operates at 2900 rpm on 50 Hz power, delivering a robust 1.5 kW (P2) output while drawing 3.6 A at rated load. Built to IEC 60034 specifications with Class F thermal insulation, the drive assembly handles heavy commercial duty with ease.
Key Features
- Six-Stage High-Lift Impellers: Uses a 6-stage stainless steel hydraulic stack to combine strong flow rates with high vertical head.
- Electronic Anti-Cycling Control: Combines differential pressure switches with microprocessor timers to stop rapid contactor chatter.
- Corrosion-Free Stainless Headers: Employs AISI 304 stainless steel across manifolds and pump internals for lasting water hygiene.
- Wide Liquid Temperature Rating: Operates reliably with chilled or heated water systems ranging from -15 °C to +110 °C.
- Sealed Industrial Motor: Protects electrical windings from plant-room dust and water splashes with an IP54 enclosure rating.
- Integrated Maintenance Valves: Includes factory-fitted isolation ball valves and check valves for trouble-free servicing.
- Ready for External Vessel: Provides a dedicated manifold tapping for simple attachment of an external diaphragm expansion tank.
- Factory Tested Skid: Arrives fully assembled, pre-wired, and hydrostatically tested for immediate site hook-up.
- Manufacturer Backing: Supported by a 24-month manufacturer warranty.
What's Included
- 1 x Calpeda MXHL 406 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Microprocessor control board with differential pressure switches
- System pressure gauge
- Factory assembled and tested boosting plant
- Supports a 200 L galvanised diaphragm expansion tank
SPECIFICATIONS
| Max Flow | 133 L/Min |
| Max Head | 63 m |
| Power | 1.5 kW / 415v |
| Rated Current | 3.6 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | '-15 °C to +110 °C |
| Inlet Size | 32 mm |
| Outlet Size | 25 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
To what maximum elevation height in metres can this multi-stage pumping set boost water?
Vertical elevation capacity on the Calpeda Fixed Speed Booster Set BS1F 1MXHL 406 tops out at 63 metres, with a maximum casing pressure of 10 bar and a temperature range of -15°C to +110°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Corrosion-resistant AISI 316L chromium-nickel-molybdenum stainless steel forms the wet end of the BS1F 1MXHL 406, which rests on a Zinc-plated Steel S235JR baseplate equipped with isolating valves and G 1 1/4 by G 1 connections.
What manufacturer warranty protection coverage supports this fixed speed pumping assembly?
Factory warranty backing on the BS1F-1MXHL-406 shields the stainless pump wet end, electric motor, and automated console against manufacturing faults from date of invoice.
What peak water discharge rate and maximum flow capacity does this package supply?
Total hydraulic throughput on the BS1F 1 MXHL 406 reaches up to 133.3 L/min (8 m³/h), maintaining steady line pressure during peak usage hours.
Which electrical power mains and automated motor control board regulate this booster set?
Propulsion for the 1MXHL 406 (BS1F 1MXHL 406) is delivered by a 1.5 kW induction motor operating on three phase 400V 50 Hz utility mains governed by an automated fixed-speed control panel (400V).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us