Roll over image to zoom
SKU: BSM1V 1MXHL 404-EMT
Calpeda BSM1V 1MXHL 404-EMT 0.75kW Variable Speed Single Pump Multistage Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Steep pipe runs and multi-storey hot-water rings demand the elevated pressure envelope delivered by the Calpeda BSM1V 1MXHL 404-EMT booster assembly. Built around a single Calpeda MXHL 404 horizontal multistage pump, this self-contained package moves up to 133.3 L/Min. When boosting water to upper floors, the system can develop up to 40.5 m of delivery head. It serves admirably in commercial kitchens, washdown bays, and apartment risers where municipal mains pressure falls short.
Intelligent variable-speed regulation comes courtesy of an integrated EasyMat frequency converter mounted directly atop the pump motor. As fixture demand rises or subsides, the inverter smoothly modulates motor frequency to lock in a constant discharge pressure without hunting. Operators benefit from lower power bills, real-time operational tracking, and automatic safety shutdowns against loss of prime or voltage irregularities.
Durability throughout the hydraulic circuit is guaranteed by AISI 304 stainless steel suction and delivery manifolds mounted on a sturdy base. Site plumbers connect to a 32 mm inlet manifold and a 25 mm outlet header, complete with isolating ball valves and non-return check valves for backflow prevention. An easy-to-read pressure gauge sits alongside a dedicated delivery header port ready for an external expansion vessel.
Mains connection requires only a single-phase 230 V supply line, which powers the three-phase 230/400 V motor windings through the inverter. Utilizing a 2-pole induction design running at 2900 rpm (50 Hz), the unit outputs 0.75 kW (P2) and draws 2 A under full hydraulic load. Constructed to IEC 60034 benchmarks with Class F insulation, the motor resists heat build-up during prolonged pumping shifts.
Key Features
- High-Efficiency Multistage Wet End: Features a 4-stage stainless steel hydraulic cartridge designed for smooth, low-noise pressure generation.
- Smart EasyMat Variable Drive: Continuously adapts pump speed to match actual water consumption, slashing energy waste and mechanical wear.
- Stainless Steel Manifold Assembly: AISI 304 suction and delivery headers ensure rust-free service and clean fluid transport.
- Extended Thermal Range: Capable of circulating liquids across an operating temperature window from -15 °C to +110 °C.
- Robust Enclosure Protection: Rated to IP54 for dust and splash resistance, paired with Class F motor insulation and IEC 60034 build quality.
- Complete Isolation Hardware: Fitted with service ball valves and non-return valves to prevent reverse flow and simplify maintenance.
- External Vessel Provision: Supplied with a convenient connection point on the discharge manifold for attaching a buffer tank.
- Pre-Commissioned Package: Shipped as a factory-tested boosting unit backed by a 24 Months warranty for peace of mind.
What's Included
- 1 x Calpeda MXHL 404 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- 1 x Pipe-mounted Calpeda EasyMat variable frequency converter
- System pressure gauge
- Factory assembled and tested boosting plant
SPECIFICATIONS
| Max Flow | 133 L/Min |
| Max Head | 40.5 m |
| Power | 0.75 kW / 415v |
| Rated Current | 2 Amps |
| Suitable For | Domestic & Light Commercial Pressure Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | '-15 °C to +110 °C |
| Inlet Size | 32 mm |
| Outlet Size | 25 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much peak water delivery volume can this multistage variable speed booster supply?
Hydraulic throughput on the Calpeda Variable Speed Booster Set BSM1V 1MXHL 404-EMT reaches up to 133.3 L/min (8 m³/h) under full inverter modulation, maintaining constant pressure across taps.
Which electrical power mains and variable speed frequency converter regulate this booster set?
Domestic single phase 230V 50 Hz mains energize the BSM1V 1MXHL 404-EMT, which is fitted with a 0.75 kW motor coordinated by an EASYMAT variable speed frequency converter (230V).
Under what maximum static head elevation and line pressure limits does this package operate?
Maximum static pressure boost for the BSM1V-1MXHL-404-EMT is rated at 40.5 metres of elevation head, maintaining 10 bar casing integrity across up to +40°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Wetted parts throughout the BSM1V 1 MXHL 404-EMT utilize AISI 304 chromium-nickel stainless steel, mounted on a Zinc-plated Steel S235JR Baseplate and fitted with a check valve, isolating valve, and G 1 1/4" BSP by G 1" BSP connections.
What manufacturer warranty protection coverage supports this variable speed pumping assembly?
Equipment coverage on the 1MXHL 404-EMT (BSM1V 1MXHL 404-EMT) is backed by Calpeda manufacturer warranty coverage protecting the multistage pump wet end, electric motor, and electronic frequency converter against manufacturing defects from date of invoice.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us