Roll over image to zoom
SKU: BS3V 3MXV 50-2008-ITT
Calpeda BS3V 3MXV 50-2008-ITT 3 x 9.2kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Balancing pressure across commercial risers requires steady performance and rapid response to flow changes. This triplex booster installation couples 3 Calpeda MXV 50-2008 vertical multistage pumps on common headers to supply dependable pressure for multi-storey residential buildings and dual-riser pressure booster loops. Operating against closed delivery isolation valves, the multistage pump stacks develop a maximum shut-off head of 112 m for vertical elevation. During maximum concurrent consumption, the three-pump array delivers a peak volumetric flow rate of 1400 L/Min across the distribution line.
Dynamic pressure balancing is executed through a motor-mounted Calpeda I-MAT variable frequency converter programmed for automated triplex staging. Line pressure feedback from an electronic transducer allows the controller to adjust motor frequencies instantaneously as plumbing demand shifts. Engineered soft-start ramp curves eliminate hydraulic water hammer shock, protecting mechanical backflow preventers, valves, and joints from fatigue. Internal protective monitoring provides automatic system shutdown in response to low-water suction faults, motor overload, or incoming phase failure.
Complete AISI 304 stainless steel construction of the pump housings, stages, and impellers ensures long-lasting hydraulic durability under continuous water circulation. The three vertical pumps tie into heavy-duty stainless steel distribution headers featuring 80 mm suction and 80 mm delivery ports with G 3" BSP threaded fittings. Individual isolation valves and non-return check valves service each pump run, mounted alongside an analog pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate.
Drive power is supplied by three 2-pole commercial induction electric motors engineered for Australian three-phase 400 V (50 Hz) electrical mains. Operating at 2900 rpm, the three motors generate 3 x 9.2 kW of mechanical drive capacity while absorbing a rated full-load current of 3 x 17.5 Amps. Class F winding insulation and IP55 weatherproof enclosures guarantee long-term thermal endurance under demanding plant room service conditions.
Key Features
- Synchronized triple vertical multistage 8-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
- An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
- Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
- Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
- Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
- Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
- Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
- Standardized DN 100 Table E flanged manifold connections simplify mechanical alignment and expedite site pipework installation.
- Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
- Supported by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 50-2008 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 1400 L/Min |
| Max Head | 112 m |
| Power | 3 x 9.2 kW / 415v |
| Rated Current | 3 x 17.5 Amps |
| Suitable For | Commercial Cold Water Reticulation |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 100 mm |
| Outlet Size | 100 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under what electrical mains supply does this variable speed three-motor package function?
Electrical power supply on the Calpeda BS3V 3MXV 50-2008-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) utilizes Three Phase 400 V power at 50 Hz to drive three 9.2 kW (12.5 HP) motors totaling 27.6 kW, coordinated by three communicating Calpeda I-MAT inverters.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Developing up to 112 metres of maximum static head, the BS3V 3MXV 50-2008-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Wetted construction on the BS3V-3MXV-50-2008-ITT combines AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, linked by DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Warranty protection supporting the BS3V 3 MXV 50 2008 ITT encompasses full Calpeda coverage for the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
To accommodate heavy site consumption, the 3MXV 50-2008-ITT provides up to 1400 L/min (84 m³/h) across three pumps under automated variable speed coordination, with each unit rated to 466.7 L/min (28 m³/h).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










