Roll over image to zoom
SKU: ESHS40-125/22
Lowara ESHS40 125/22 Stainless Steel Stub Shaft Centrifugal Pump for Fluid Transfer with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Addressing the fluid transfer requirements of commercial water supply systems, this equipment delivers targeted liquid management across high-capacity infrastructure. Facility operators rely on this unit to handle clear water and mildly aggressive fluids, ensuring consistent operational parameters are met safely within complex distribution networks.
Technical specifications outline a Max Head scaling to approximately 20.3 m alongside a Max Flow of approximately 732 L/Min. The electrical architecture demands a 415v three-phase supply, utilizing 4.61 Amps to power the 2.2 kW industrial drive. The physical piping connections consist of a 65 mm flanged intake port and a 40 mm radial discharge port.
Hydraulic momentum is controlled through a precision-engineered single-stage centrifugal chamber utilizing an end-suction geometry. The physical framework incorporates a stub shaft adapter bracket, which keys the standard motor extension directly to the enclosed impeller. This rigid mechanical coupling minimizes alignment deviation during extended runtime.
Fabricated and cast entirely from AISI 316 stainless steel, the primary housing and rotating elements resist long-term material degradation. The internal shaft relies on a standardized Ceramic/Carbon mechanical seal integrated with FKM elastomers to prevent fluid ingress. The motor features an IP55 protection degree, safely tolerating liquid temperatures from -10 °C to +120 °C.
FEATURES
- Single-stage end-suction layout with horizontal shaft
- Combined fabricated and cast AISI 316 stainless steel components
- Direct stub shaft rigid coupling via a dedicated adapter bracket
- Standardized Ceramic, Carbon, and FKM mechanical seal
- Three-phase 415v compatibility for industrial electrical grids
- Class 155 (F) insulation to safeguard internal motor windings
- Rated for maximum system operating pressures up to 12 bar
SPECIFICATIONS
| Max Flow | 732 L/Min |
| Max Head | 20.3 m |
| Power | 2.2 kW / 415v |
| Rated Current | 4.61 Amps |
| Suitable For | Industrial Process |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -10°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 40 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What corrosion-resistant metallurgy standards and mechanical face seal components are built into this stainless steel end-suction centrifugal pump?
Fortified for demanding fluid environments, the ESHS40-125/22 relies on alloy construction of AISI 316 stainless steel pump casing, diffusers, and closed impellers paired with mechanical face seals to withstand liquid corrosion.
How much electrical motor power in kilowatts and what line voltage current feed are required to operate this stainless steel end-suction centrifugal pump?
Equipped from dedicated power supplies, the ESHS40-125-22 features an electric motor rated at 2.2 kW (3.0 HP) powered by 380–415 V, 50 Hz, three-phase with a rating of 4.61 A.
What maximum working pressure limit and allowable liquid temperature range are built into this stainless steel end-suction centrifugal pump?
Withstanding across industrial piping systems, the ESHS40 125 22 maintains a maximum working pressure rating of 12 bar (PN 12) across fluid operating temperatures from -10°C to +120°C.
What maximum elevation head is produced by this stainless steel end-suction centrifugal pump when pumping upward?
Developing through distribution piping lines, the ESHS40_125_22 develops a maximum dynamic elevation head of approximately 20.3 m to elevate water.
When pumping into piping lines, what maximum flow volume and port diameters are output by this stainless steel end-suction centrifugal pump?
Distributing through designated connection lines, the ESHS40-125/22 provides a peak fluid flow rate of approximately 732 L/Min connecting via DN 65 suction and DN 40 discharge flanged ports.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us