Roll over image to zoom
SKU: ESHS50-125/22
Lowara ESHS50 125/22 Stainless Steel Single Stage Centrifugal Pump for Commercial Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Supporting critical fluid scaling operations, this equipment is deployed primarily for commercial water supply and utility distribution applications. Facility engineers integrate this system into complex building architectures to distribute clean water while maintaining strict circulation stability.
Operating parameters define a Max Head of approximately 15.5 m combined with a Max Flow of approximately 1116 L/Min. Electrical prerequisites require a 415v three-phase power source, drawing 4.61 Amps to engage the highly efficient 2.2 kW drive. The physical piping interface features a 65 mm suction inlet and a 50 mm outlet dimension.
Circulation characteristics are managed by a single-stage horizontal hydraulic layout equipped with a precisely balanced closed impeller. The mechanical assembly relies on a stub shaft bracket that directly keys the motor to the fluid mechanics. This provides steady suction capabilities and highly efficient delivery across the targeted performance curve.
Constructed from combined fabricated and cast AISI 316 stainless steel, the pump housing provides exceptional operational endurance against environmental wear. The shaft relies on a standard Ceramic/Carbon/FKM mechanical seal arrangement, while the motor is classified under an IP55 protection degree for safe usage up to +120 °C.
FEATURES
- Single-stage horizontal hydraulic architecture with radial discharge
- Direct stub shaft coupling configuration utilizing an adapter bracket
- Combined fabricated and cast AISI 316 stainless steel construction
- Standardized FKM elastomer paired with Ceramic/Carbon sealing
- Flanged suction (65 mm) and radial discharge (50 mm) ports
- IP55 motor protection degree suitable for industrial facility floors
- Operates safely within liquid temperature variations up to +120 °C
SPECIFICATIONS
| Max Flow | 1116 L/Min |
| Max Head | 15.5 m |
| Power | 2.2 kW / 415v |
| Rated Current | 4.61 Amps |
| Suitable For | Cooling Systems |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -10°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
In vertical supply circuits, what dynamic elevation head does this stainless steel end-suction centrifugal pump develop?
Producing through distribution piping lines, the ESHS50-125/22 produces a maximum dynamic head of approximately 15.5 m to lift fluid upward.
Across building pipe runs, what peak flow volume and connection port sizing does this stainless steel end-suction centrifugal pump achieve?
Providing through designated connection lines, the ESHS50-125-22 delivers a peak delivery flow rate of approximately 1116 L/Min discharging through DN 65 suction and DN 50 discharge flanged ports.
To defend against corrosive chemical attack, what alloy materials and mechanical face seals are used in this stainless steel end-suction centrifugal pump?
Shielded for demanding fluid environments, the ESHS50 125 22 features alloy construction of AISI 316 stainless steel pump casing, diffusers, and closed impellers with mechanical face seals to resist corrosion and chemical attack.
How is this stainless steel end-suction centrifugal pump energized across power panels regarding motor kilowatt rating and electrical voltage feed?
Furnished from dedicated power supplies, the ESHS50_125_22 is powered by an electric motor rated at 2.2 kW (3.0 HP) running on 380–415 V, 50 Hz, three-phase with a current draw of 4.61 A.
What permissible fluid operating temperature range and maximum working pressure limit protect this stainless steel end-suction centrifugal pump?
Accommodating across industrial piping systems, the ESHS50-125/22 sustains a maximum working pressure capability of 12 bar (PN 12) across liquid operating temperatures from -10°C to +120°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us