Roll over image to zoom
SKU: ESHS50-200/110A
Lowara ESHS50 200/110A Stainless Steel Horizontal Centrifugal Pump for Cooling with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Functioning reliably in heavy-scale commercial networks, this high-capacity centrifugal pump controls process water routing across complex industrial installations. It effectively addresses the strict temperature management requirements of cooling systems and water treatment plants processing clear or mildly aggressive liquids.
Operating parameters define a Max Head of approximately 46.4 m combined with a Max Flow of approximately 1248 L/Min. Electrical prerequisites require a 415v three-phase power source, drawing 19.1 Amps to engage the highly efficient 11.0 kW drive. The physical piping interface features a 65 mm suction inlet and a 50 mm outlet dimension.
Circulation characteristics are managed by a single-stage horizontal hydraulic layout equipped with a precisely balanced closed impeller. The mechanical assembly relies on a stub shaft bracket that directly keys the motor to the fluid mechanics. This provides steady suction capabilities and highly efficient delivery across the performance curve.
Constructed entirely from fabricated and cast AISI 316 stainless steel, the pump housing provides exceptional operational endurance against environmental wear. The shaft relies on a standard Ceramic/Carbon/FKM mechanical seal arrangement, while the motor is classified under an IP55 protection degree for safe usage in temperatures ranging from -10 °C to +120 °C.
FEATURES
- Single-stage horizontal hydraulic architecture with radial discharge
- Direct stub shaft coupling configuration utilizing an adapter bracket
- Combined fabricated and cast AISI 316 stainless steel material specification
- Standardized FKM elastomer paired with Ceramic/Carbon sealing
- Flanged suction (65 mm) and radial discharge (50 mm) ports
- IP55 motor protection degree suitable for industrial facility floors
- Operates safely within liquid temperature variations up to +120 °C
SPECIFICATIONS
| Max Flow | 1398 L/Min |
| Max Head | 46.4 m |
| Power | 11 kW / 415v |
| Rated Current | 19.1 Amps |
| Suitable For | Industrial Cooling Systems |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -10°C to +120°C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under full impeller velocity, what maximum dynamic lift head does this stainless steel end-suction centrifugal pump achieve?
Propelling across building service lines, the ESHS50-200/110A attains a peak dynamic elevation head of approximately 46.4 m propelling fluid upward.
Regarding volumetric delivery, what maximum flow volume and connection port diameters does this stainless steel end-suction centrifugal pump provide?
Conveying across facility piping networks, the ESHS50-200-110A sustains a maximum delivery flow capacity of approximately 1248 L/Min plumbed with DN 65 suction and DN 50 discharge flanged ports.
Regarding alloy durability, what metallurgy standards and mechanical face seal materials protect this stainless steel end-suction centrifugal pump?
Armored with corrosion-resistant alloy materials, the ESHS50 200 110A features metallurgy of AISI 316 stainless steel pump casing, diffusers, and closed impellers complemented by precision mechanical seals to eliminate corrosion leaks.
Under standard electrical distribution, what motor power in kilowatts and supply voltage current draw run this stainless steel end-suction centrifugal pump?
Engineered by facility power panels, the ESHS50_200_110A is driven by an electric motor rated at 11 kW (15.0 HP) powered by 380–415 V, 50 Hz, three-phase drawing 19.10 A.
What operating pressure boundaries in bar and permissible fluid temperature range govern this stainless steel end-suction centrifugal pump?
Managing under demanding fluid temperatures, the ESHS50-200/110A withstands a maximum working pressure limit of 12 bar (PN 12) with fluid temperatures ranging from -10°C to +120°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us