Roll over image to zoom
SKU: ESHS80-200/370
Lowara ESHS80 200/370 Stainless Steel Horizontal Centrifugal Pump for Industrial Process with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Maintaining precise fluid regulation within commercial building services, this stainless steel end suction centrifugal stub shaft motor pump integrates seamlessly into heavy water distribution and industrial cooling networks. It provides controlled liquid movement for complex mechanical environments, safely processing non-aggressive and moderately aggressive liquids through extended duty cycles.
Performance capacities indicate a Max Flow reaching approximately 4002 L/Min, coupled with a Max Head of approximately 70.5 m. The electrical system requires a 415v three-phase connection and draws a rated current of 61.5 Amps for its highly robust 37.0 kW motor. The flanged interface utilizes a 100 mm suction inlet and an 80 mm discharge outlet.
Fluid distribution is achieved via a horizontal single stage centrifugal chamber equipped with a meticulously balanced enclosed impeller. The mechanical assembly depends on a rigid stub shaft connection that links the fluid mechanics directly to the enclosed drive. This structural approach sustains excellent suction characteristics and uniform pressure generation.
To combat chemical exposure and wear, the pump features cast stainless steel (1.4408) for its primary wetted parts. Environmental protection is managed by an FKM elastomer and Ceramic/Carbon mechanical seal arrangement. The IP55 classified electrical enclosure allows operation in demanding industrial spaces up to +120 °C.
FEATURES
- Single stage hydraulic chamber for consistent pressure output
- Cast stainless steel (1.4408) material specification for enhanced durability
- Rigid stub shaft coupling connecting the motor and pump
- Mechanical sealing utilizing Carbon, Ceramic, and FKM materials
- Back pull-out architecture for simplified routine maintenance
- Fully enclosed motor housing with an IP55 protection rating
- Flanged suction (100 mm) and radial discharge (80 mm) ports
SPECIFICATIONS
| Max Flow | 4002 L/Min |
| Max Head | 70.5 m |
| Power | 37 kW / 415v |
| Rated Current | 61.5 Amps |
| Suitable For | Industrial Process |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | -10°C to +120°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Across vertical distribution piping, what dynamic lift head does this stainless steel end-suction centrifugal pump maintain?
Circulating through plant water circuits, the ESHS80-200/370 attains a peak dynamic elevation head of approximately 70.5 m propelling fluid upward.
Regarding piping flow capacity, what peak fluid volume and discharge connection diameters apply to this stainless steel end-suction centrifugal pump?
Releasing through system pipework runs, the ESHS80-200-370 sustains a maximum delivery flow capacity of approximately 4002 L/Min plumbed with DN 100 suction and DN 80 discharge flanged ports.
How do the alloy components and mechanical seal faces guard this stainless steel end-suction centrifugal pump against fluid corrosion?
Specified for harsh corrosive applications, the ESHS80 200 370 features metallurgy of AISI 316 stainless steel pump casing, diffusers, and closed impellers complemented by precision mechanical seals to eliminate corrosion leaks.
In commercial electrical installations, what motor kilowatt rating and line voltage current support this stainless steel end-suction centrifugal pump?
Built from facility electrical circuits, the ESHS80_200_370 is driven by an electric motor rated at 37 kW (50.0 HP) powered by 380–415 V, 50 Hz, three-phase drawing 61.5 A.
To withstand fluid operating pressures, what maximum working pressure in bar and thermal limits apply to this stainless steel end-suction centrifugal pump?
Enduring across facility pressure circuits, the ESHS80-200/370 withstands a maximum working pressure limit of 12 bar (PN 12) with fluid temperatures ranging from -10°C to +120°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us