Roll over image to zoom
SKU: NSCS65-125/110
Lowara NSCS65 125/110 Cast Iron High Capacity Centrifugal Pump for Water Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Centralized water supply systems require steady hydraulic distribution to support daily facility operations. The Lowara NSCS65-125/110 high-capacity centrifugal unit acts as a mechanical driver for industrial water boosting, providing steady fluid delivery for commercial layouts.
Delivery output features a maximum head rating of approximately 29.1 m and a volume output reaching 2940 L/Min. Powered by a 415v three-phase electrical framework, the 11 kW motor registers 19.2 Amps during standard operation. Plumbing connectivity utilizes an 80 mm suction flange paired with a 65 mm discharge flange.
The internal pathways are shaped to restrict intake cavitation and promote smooth pressurized distribution. By managing directional water momentum, the pump produces a predictable flow velocity that supports industrial layouts without experiencing disruptive energy losses.
Constructed from cast iron, the wetted elements tolerate operational fluid temperatures ranging between -25°C and +120°C. The exterior incorporates thermal insulation materials and structural bracing to maintain electrical safety over extended continuous lifespans.
FEATURES
- Close-coupled motor adapter bracket removes the need for complex field alignment procedures during installation
- Innovative back pull-out assembly isolates the rotating elements for rapid technical inspection
- Cast iron drive bracket supplies structural rigidity for the attached high-voltage assembly
- Industrial-grade insulation protects the internal stator windings against operational heat generation
- Interchangeable mechanical seal arrangement accommodates varied industrial fluids for widespread facility versatility
- Galvanized carbon steel hardware fastens the primary casing structure to prevent mechanical shifting
- Elastomer seals prevent fluid bypass across varying high-pressure atmospheric conditions
SPECIFICATIONS
| Max Flow | 2940 L/Min |
| Max Head | 29.1 m |
| Power | 11 kW / 415v |
| Rated Current | 19.2 Amps |
| Suitable For | Utility Water Systems |
| Body Material | Cast Iron |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 80 mm |
| Outlet Size | 65 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What motor kilowatt power rating and electrical operating voltage feed power this flanged end-suction centrifugal pump?
Connected by industrial electrical lines, the NSCS65-125/110 relies on an electric motor rated at 11 kW (15.0 HP) energized via 380–415 V, 50 Hz, three-phase drawing 19.2 A.
What thermal operating boundaries and maximum working pressure capability govern this flanged end-suction centrifugal pump?
Tested under rigorous operating pressures, the NSCS65-125-110 sustains a maximum working pressure boundary of 16 bar (PN 16) and operating temperatures from -25°C to +120°C.
To what peak elevation can water be lifted by this flanged end-suction centrifugal pump?
Rising across facility piping systems, the NSCS65 125 110 reaches a maximum dynamic elevation head of approximately 29.1 m across vertical runs.
For facility pipework layout, what connection port dimensions and maximum flow volume apply to this flanged end-suction centrifugal pump?
Feeding across commercial distribution lines, the NSCS65_125_110 delivers a peak volumetric flow of approximately 2940 L/Min via connected DN 80 suction and DN 65 discharge flanged ports.
To resist fluid corrosion, what alloy materials and mechanical face seal construction are used in this flanged end-suction centrifugal pump?
Crafted with resilient metallurgy construction, the NSCS65-125/110 employs alloy construction of cast iron casing with stainless steel closed impellers with mechanical face seals to guard against chemical attack and corrosion.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us