Roll over image to zoom
SKU: NSCS80-160/110
Lowara NSCS80 160/110 Cast Iron Single Stage Centrifugal Pump for Water Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Centralized water supply systems require steady hydraulic distribution to support daily facility operations. The Lowara NSCS80-160/110 end-suction centrifugal pump is designed to integrate into commercial plumbing networks, providing consistent liquid transfer across extended operating cycles.
Operating on a 415v three-phase supply, this unit features an 11.0 kW motor that draws a rated current of 19.2 Amps. It achieves a maximum head of approximately 25.7 m and delivers a peak flow capacity of 3462 L/Min. Installation is supported by standardized 100 mm suction and 80 mm discharge flanged connections.
The internal hydraulic design utilizes a closed impeller to regulate fluid acceleration and minimize intake turbulence. This configuration helps establish a predictable circulation rhythm, making it suitable for multi-branch plumbing arrays that demand stable pressure.
Constructed from cast iron, the wetted elements tolerate operational fluid temperatures ranging between -25°C and +120°C. The exterior incorporates thermal insulation materials and structural bracing to maintain electrical safety over extended continuous lifespans.
FEATURES
- Close-coupled motor adapter bracket removes the need for complex field alignment procedures during installation
- Innovative back pull-out assembly isolates the rotating elements for rapid technical inspection
- Thickened volute geometry safely absorbs the hydraulic shock common in centralized plumbing grids
- Industrial-grade insulation protects the internal stator windings against operational heat generation
- Interchangeable mechanical seal arrangement accommodates varied industrial fluids for widespread facility versatility
- Galvanized carbon steel hardware fastens the primary casing structure to prevent mechanical shifting
- Cast iron drive bracket supplies structural rigidity for the attached high-voltage assembly
SPECIFICATIONS
| Max Flow | 3462 L/Min |
| Max Head | 25.7 m |
| Power | 11 kW / 415v |
| Rated Current | 19.2 Amps |
| Suitable For | Industrial Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | -25°C to +120°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How is this flanged end-suction centrifugal pump powered across facility circuits regarding motor kilowatt rating and electrical voltage feed?
Running from dedicated power supplies, the NSCS80-160/110 relies on an electric motor rated at 11 kW (15.0 HP) energized via 380–415 V, 50 Hz, three-phase drawing 19.2 A.
How much working pressure capability and what fluid temperature tolerances protect this flanged end-suction centrifugal pump?
Approved across industrial piping systems, the NSCS80-160-110 sustains a maximum working pressure boundary of 16 bar (PN 16) and operating temperatures from -25°C to +120°C.
Through its centrifugal casing, what peak vertical elevation head does this flanged end-suction centrifugal pump provide?
Driving through distribution piping lines, the NSCS80 160 110 reaches a maximum dynamic elevation head of approximately 25.7 m across vertical runs.
For system flow matching, what maximum delivery volume and discharge pipe diameter are rated on this flanged end-suction centrifugal pump?
Routing through designated connection lines, the NSCS80_160_110 delivers a peak volumetric flow of approximately 3462 L/Min via connected DN 100 suction and DN 80 discharge flanged ports.
What metallurgy standards and mechanical face seal materials guard this flanged end-suction centrifugal pump against fluid corrosion?
Equipped for demanding fluid environments, the NSCS80-160/110 employs alloy construction of cast iron casing with stainless steel closed impellers with mechanical face seals to guard against chemical attack and corrosion.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us