Roll over image to zoom
Ebara Best 5 Stainless Steel Manual 3 Phase Submersible Drainage Pump for Sump Removal with Open Impeller
Australia-Wide
(08) 9240 2992
Official Ebara
Peace of Mind
Product Overview
The Ebara Best 5 three-phase submersible drainage pump operates at total manometric heads up to 18.4 meters. This unit is designed for moving seepage water, general draining of cellars, and tank transfer. The pump operates in both stationary and mobile setups in vertical alignments.
Constructed from AISI 304 Stainless Steel, the casing cover and motor case surround internal components. The open centrifugal impeller, measuring 125 mm, allows passage of suspended solids up to 10 mm. The drive shaft utilizes AISI 303 Stainless Steel, with the motor cover and case manufactured from AISI 304 alloy. The unit weighs 13.5 kg and operates in liquids up to 35°C.
The 1.5 kW motor operates on a 400 V supply at 50 Hz with a rated current of 3.3 Amps. The pump achieves a maximum head of 18.4 meters and a maximum capacity of 360 L/Min through a 40 mm discharge outlet. The motor incorporates a built-in capacitor and automatic thermal overload protection.
Thermal protection is provided by Class F motor insulation with an IP68 protection rating. The assembly allows immersion depths up to 10 meters. Twin mechanical seals provide containment. The upper seal uses Carbon/Ceramic/NBR materials and the lower seal features Silicon Carbide/Silicon Carbide/NBR. The internal seal chamber contains white mineral oil.
Features
- The pump is supplied with an H07RN-F power cable as specified by the manufacturer.
- The pump incorporates sealed ball bearings as specified by the manufacturer.
- Features terminal insulating box in glass fibre PA66 and terminal insulating cover in PA66.
- Features AISI 303 Stainless Steel casing bolts and AISI 304 Stainless Steel structural tie rods.
- Equipped with NBR rubber O-ring seals and an adjusting ring manufactured from C70 steel.
- Features a suction strainer and impeller ring constructed from AISI 304 Stainless Steel.
SPECIFICATIONS
| Max Flow | 360 L/Min |
| Max Head | 18.4 m |
| Power | 1.5 kW / 415v |
| Rated Current | 3.3 Amps |
| Suitable For | High Volume Draining |
| Body Material | AISI 304 Stainless Steel |
| Liquid Temperature | Maximum 35°C |
| Outlet Size | 40 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What maximum flow is available for higher-volume transfer?
For higher-volume tank transfer, BEST_5 provides a maximum flow of 360 L/Min through its 40 mm discharge connection in vertical drainage duties.
Which motor rating and electrical supply apply?
Three-phase 400 V power drives the 1.5 kW motor in BEST 5, which draws 3.3 Amps at 50 Hz. during normal drainage operation.
Which installation types and drainage tasks are supported?
Fixed or mobile vertical installations suit BEST-5 for moving seepage water and draining cellars or transferring tank water in liquids up to 35°C.
What size solids can pass through the impeller?
Its 125 mm open centrifugal impeller allows BEST/5 to pass suspended solids up to 10 mm through the 40 mm outlet.
What maximum head is available during discharge?
A maximum head of 18.4 m is available from BEST5 during vertical discharge for cellar drainage and tank transfer duties.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us