Roll over image to zoom
Ebara Right 75 MA Stainless Steel Submersible Wasteater Pump for Sump Disposal with Semi Vortex Impeller
Australia-Wide
(08) 9240 2992
Official Ebara
Peace of Mind
Product Overview
Wastewater and drainage environments with soft and fibrous suspended solids are managed by the solid-handling capabilities of the Ebara Right 75 MA submersible wastewater pump. This unit is suitable for handling soft and fibrous solids with a maximum solids handling capacity of 35 mm. The physical setup is suitable for fixed and mobile vertical installations.
Constructed from AISI 304 Stainless Steel, the pump casing, impeller, suction cover, and motor bracket comprise the main assembly. The semi vortex impeller handles suspended particles within a 35 mm clearance. The shaft is AISI 303 Stainless Steel, with the entire pump assembly weighing 10 kg and operating in liquids up to 50°C.
The 0.55 kW motor operates on a 240v supply at 50 Hz with a rated current of 4.8 Amps. The pump achieves a maximum head of 7.8 meters and a maximum capacity of 240 L/Min through a 40 mm discharge outlet. The motor integrates an air-filled, dry submersible two-pole motor design.
Thermal protection is provided by Class F motor insulation with an IP68 protection rating. The assembly allows immersion depths up to 10 meters. Double mechanical seals in an oil lubricated chamber provide containment. The lower faces are Silicon Carbide and the upper faces are Carbon/Ceramic with NBR elastomers. The seal chamber contains white mineral oil.
Features
- The pump is supplied with an H07RN-F power cable as specified by the manufacturer.
- Incorporates sealed ball bearings on both the upper and lower shaft sides as specified by the manufacturer.
- Includes an impeller nut and impeller key manufactured from AISI 304 Stainless Steel.
- Features a pump support foot constructed from AISI 304 Stainless Steel for vertical positioning.
- Equipped with NBR rubber O-ring seals to maintain watertight compartment integrity.
- Features casing screws and structural washers manufactured from AISI 304 Stainless Steel.
SPECIFICATIONS
| Max Flow | 240 L/Min |
| Max Head | 7.8 m |
| Power | 0.55 kW / 240v |
| Rated Current | 4.8 Amps |
| Suitable For | Wastewater Solids Handling |
| Body Material | AISI 304 Stainless Steel |
| Liquid Temperature | Maximum 50°C |
| Outlet Size | 40 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which particle size can the pump handle?
Fibrous wastewater containing particles up to 35 mm can pass through the semi-vortex path in RIGHT_75_MA during wastewater drainage in fixed or mobile vertical installations.
Which power supply and motor current are required?
Single-phase 240 V power supplies the 0.55 kW motor in RIGHT 75 MA, which draws 4.8 Amps at 50 Hz.
What stainless steel grades are used in construction?
AISI 304 stainless steel forms the casing and impeller on RIGHT-75-MA, while the shaft uses AISI 303 stainless steel for submerged service.
What maximum flow is specified for drainage?
The 40 mm discharge connection on RIGHT/75/MA carries a maximum flow of 240 L/Min during wastewater and drainage transfer through vertical outlets.
What immersion depth and liquid temperature are supported?
IP68 protection allows RIGHT75MA to operate submerged to 10 m and handle liquids up to 50°C in vertical installations during fixed or mobile service.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us