Roll over image to zoom
Ebara 80 DVSA 51.5 Cast Iron Automatic Wastewater Pump for Wastewater Transfer with Semi-Vortex Impeller
Australia-Wide
(08) 9240 2992
Official Ebara
Peace of Mind
Product Overview
Automatic lifting of civil effluents and wastewater transfer are primary applications for this vertical submerged pump. It handles liquid temperatures up to 40°C and is rated for a maximum submergence depth of 4 meters during continuous service. This automatic configuration utilizes an integrated control device and float switch to manage drainage cycles based on water level.
The semi-vortex impeller is designed for non-clog operation when handling wastewater containing soft or fibrous solids. This design permits the passage of foreign matter up to 45 mm in diameter and fibers reaching 320 mm in length. Discharge is provided through an 80 mm vertical delivery port fitted with the included screwed companion flange kit.
Performance for this 1.5 kW motor includes a maximum flow rate of 570 L/Min and a total head of 14 m. Drawing a rated current of 3.3 Amps on a three-phase 415v supply, the unit is supplied with 6 m of submersible power cable. The air-filled 2-pole induction motor operates at 3000 rpm and includes in-built electrical protection.
Construction features a cast iron pump body, motor frame, and impeller with an AISI 403 stainless steel shaft. Sealing is managed by a double mechanical seal isolated in an oil chamber featuring Silicon Carbide lower faces and Carbon/Ceramic upper faces. The rotating assembly utilizes 304 fasteners and is rated for safe operation in permanent immersion.
FEATURES
- Automated water level control managed by a pre-installed float switch for unattended operation.
- Semi-vortex impeller design ensures non-clogging performance with suspended solids up to 45 mm.
- Twin mechanical seals in an oil chamber with SiC faces isolate the induction motor from ingress.
- High-volume 80 mm discharge configuration enables efficient transfer of civil wastewater.
- Three-phase motor configuration draws 3.3 Amps while providing flow rates up to 570 L/Min.
- Includes an 80 mm screwed companion flange discharge elbow kit with necessary fasteners.
- In-built thermal protector safeguards the motor winding against damage during drainage run cycles.
- Class F insulation and IP68 degree of protection support reliability in permanent submerged duty.
SPECIFICATIONS
| Max Flow | 570 L/Min |
| Max Head | 14 m |
| Power | 1.5 kW / 240v |
| Rated Current | 3.3 Amps |
| Suitable For | Automatic Piggery Washdown |
| Body Material | Cast Iron |
| Liquid Temperature | Maximum 40°C |
| Outlet Size | 80 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which wastewater duties suit this automatic submersible pump?
Civil effluent lifting and wastewater transfer suit 80_DVSA_51_5, whose integrated float switch manages unattended drainage in submerged collection pits with vertical discharge.
What maximum flow is available for effluent transfer?
Effluent transfer can reach a maximum flow of 570 L/Min through 80 DVSA 51 5 during automatic operation from submerged collection wells.
Which solids and fibre sizes can pass?
The semi-vortex impeller on 80-DVSA-51-5 accommodates solids up to 45 mm and fibres reaching 320 mm through its wastewater passage.
What electrical supply and cable are specified?
A three-phase 415 V supply powers 80/DVSA/51/5, which draws 3.3 Amps and is supplied with a 6 m submersible cable.
What maximum head supports vertical collection-pit drainage?
Vertical wastewater discharge from collection pits can use the maximum head of 14 m provided by 80DVSA515 through its outlet.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us