Roll over image to zoom
SKU: 93637522
Grundfos Hydro MPC-E 2 x CRIE 5-4 Single Phase 2 x 1.1kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
For day spas and compact medical centres running half a dozen outlets at once, a factory-assembled Hydro MPC-E 2 CRIE 5-4 package provides a well-matched solution, with two CRIE 5-4 pumps staged against the demand curve. Everything is ordered under the single part number 93637522.
It handles flows up to 340 L/min across the system. The pumps can develop up to 39.9 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 1 x 240 V at 50 Hz with a rated current of 6.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Typical duty sits with high-rise developments, industry and commercial buildings. It is designed for clean-water pressure boosting where demand varies through the day.
Features
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- A suction-side pressure sensor guards the pumps against dry running.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Two Grundfos CRIE 5-4 vertical multistage pumps run in parallel on one common base frame.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- At P2 each main pump is 1.1 kW, covering the duty without oversizing the frame.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
What's Included
- 2 x Grundfos CRIE 5-4 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 340 L/Min |
| Max Head | 39 m |
| Power | 2 x 1.1 kW / 240v |
| Rated Current | 6.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C to 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What manufacturer warranty backing supports this packaged variable speed pump set?
The complete factory package of the Grundfos Hydro MPC-E 2 CRIE 5-4 VN GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
Which water throughput capacity does this multi pump booster set maintain during maximum facility draw?
Meeting high volumetric requirements, the Hydro MPC-E 2 CRIE 5-4 achieves a maximum water delivery capacity of 340 L/min through coordinated parallel pump operation.
How is electric motor propulsion and inverter regulation delivered across this booster assembly?
Mechanical drive on the Hydro-MPC-E-2-CRIE-5-4 features two inverter-controlled variable frequency drive MGE electric motors producing 1.1 kW per pump, powered by a 1 x 240 V connection for energy-optimised water delivery.
Under full duty operation, what maximum head and operating pressure does this booster package produce?
Discharge pressure performance allows the Hydro MPC E 2 CRIE 5 4 to achieve up to 39.9 m maximum dynamic head under a 16 bar rated system pressure.
Which manifold connection ports and isolation valve components are supplied on this booster set?
Interconnecting pipework on the 2 CRIE 5-4 (Hydro MPC-E) features factory-fitted R 2" stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us