Roll over image to zoom
SKU: 93637820
Grundfos Hydro MPC-E 2 x CRNE 10-1 Single Phase 2 x 0.75kW Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
For business parks adding tenancies faster than their mains can serve, a factory-assembled Hydro MPC-E 2 CRNE 10-1 package provides a well-matched solution, with two CRNE 10-1 pumps staged against the demand curve. Specify part number 93637820 and the whole set lands tested, assembled and ready for pipework.
Flow capacity reaches 523 L/min. Up to 14.2 metres of head is available to maintain pressure as demand changes. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 1 x 230 V at 50 Hz with a rated current of 6.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include high-rise developments, industry and irrigation schemes. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Each main pump is rated 0.75 kW (P2), so per-pump draw scales down as speed follows demand.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Two Grundfos CRNE 10-1 vertical multistage pumps run in parallel on one common base frame.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- A suction-side pressure sensor guards the pumps against dry running.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
What's Included
- 2 x Grundfos CRNE 10-1 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 523 L/Min |
| Max Head | 14 m |
| Power | 2 x 0.75 kW / 240v |
| Rated Current | 6.7 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C to 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which manufacturer warranty terms apply to the complete packaged booster set?
The complete factory package of the Grundfos Hydro MPC-E 2 CRNE 10-1 VN GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
How much fluid volume can this parallel multistage pump set discharge during high consumption periods?
Meeting high volumetric requirements, the Hydro MPC-E 2 CRNE 10-1 achieves a maximum water delivery capacity of 523 L/min through coordinated parallel pump operation.
How is electrical propulsion and variable speed control provided across the parallel pump set?
Mechanical drive on the Hydro-MPC-E-2-CRNE-10-1 features two inverter-controlled variable frequency drive MGE electric motors producing 0.75 kW per pump, powered by a 1 x 230 V connection for energy-optimised water delivery.
Which maximum dynamic head does this parallel booster set achieve during full duty pumping?
Discharge pressure performance allows the Hydro MPC E 2 CRNE 10 1 to achieve up to 14.2 m maximum dynamic head under a 16 bar rated system pressure.
Which manifold connection sizes and fluid isolation valves are factory fitted on this booster unit?
Interconnecting pipework on the 2 CRNE 10-1 (Hydro MPC-E) features factory-fitted R 2 1/2" stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us