Roll over image to zoom
SKU: 99221304
Grundfos MAGNA1 40-100 F Cast Iron Variable Speed Circulator Pump for Mixing Loops with Composite Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Capable of delivering 6.305 m of head at substantial flow rates, the Grundfos MAGNA1 40-100 F circulator pump is specified for air handling unit coils, multi-floor heating risers, and commercial heat recovery networks. It automatically modulates speed to deliver balanced differential pressure across the system.
The casing is cast from EN-GJL-200 iron with a 220 mm port-to-port dimension, holding a composite impeller, stainless rotor can, and air-cooled electronic module. Rated for 10 bar working pressure and liquid temperatures from -10°C to 110°C, the complete pump assembly weighs 16.3 kg.
The single-phase 230-240 V ECM motor has a maximum power input (P1) of 17 W to 370 W and operates from 17 W to a maximum electrical power input (P1) of 370 W at 1.65 A. Hydraulic performance achieves a flow rate of 12.77 m³/h (213 L/Min) with a maximum head of 10 m through DN 40 DIN flanged pipe ports.
Control options encompass three proportional pressure curves, three constant pressure curves, and three constant speeds. The unit holds an EEI rating of 0.19, IPX4D ingress protection, Class F insulation, and integrated fault signal relay contacts.
FEATURES
- 10 m maximum head overcomes elevated resistance across commercial heating coils
- High flow volume of 213 L/Min serves central plant distribution headers
- Permanent magnet motor design achieves an Energy Efficiency Index (EEI) of 0.19
- Operating power self-adjusts between 18 W and 370 W according to circuit demand
- Cast iron EN-GJL-200 housing rated for 10 bar maximum working pressure
- Composite impeller resists chemical corrosion in water-glycol heating mixtures
- Digital start/stop terminals and fault relay output facilitate BMS interlocks
SPECIFICATIONS
| Max Flow | 213 L/Min |
| Max Head | 10 m |
| Power | 0.27 kW / 240v |
| Rated Current | 1.65 Amps |
| Suitable For | Flanged Heating and Heat Pump Circuits |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to 110°C |
| Inlet Size | 40 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What fluid temperature limits and immersion depths are rated for this unit?
Tested for thermal durability, the Grundfos MAGNA1 40-100 F tolerates working fluid temperatures -10°C to 110°C.
What peak dynamic elevation does this pump develop?
Fluid elevation through vertical risers reaches up to 10 m with the MAGNA1 40-100 F under standard duty points.
How much water volume can this unit move through the pipework?
Discharge throughput on the MAGNA1-40-100-F reaches a maximum flow rate of approximately 213 L/Min under standard operating conditions.
How is the pump casing constructed to resist mechanical and fluid wear?
Wetted components on the MAGNA1 40 100 F are crafted from high-grade Cast Iron to maintain physical integrity and resist abrasive wear.
Does this pump run on standard household power or three-phase power?
Electrical power for the MAGNA1/40/100/F requires a 240v connection, driving an efficient 0.27 kW motor that draws 1.65 Amps.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us