Roll over image to zoom
SKU: 99221306
Grundfos MAGNA1 40-150 F Cast Iron Variable Speed Circulator Pump for Heat Pump Systems with Composite Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Developing 8.707 m of head, the Grundfos MAGNA1 40-150 F circulator pump targets tall multi-storey heating risers, central plant distribution headers, and high-pressure-drop heat exchangers. Its onboard variable frequency drive delivers exact pressure control as circuit valves throttle.
Manufactured from EN-GJL-200 cast iron, the 250 mm port-to-port casing holds a precision composite impeller and air-cooled electronic power module. The assembly is rated for 10 bar working pressure and circulating temperatures from -10°C to 110°C, weighing 16 kg.
The 1-phase 230-240 V 50/60 Hz ECM motor has a maximum power input (P1) of 16 W to 615 W while electrical input power (P1) draws between 16 W and 615 W with a maximum current of 2.71 A. Hydraulic performance achieves a calculated flow rate of 15.74 m³/h (262 L/Min) against a maximum head of 8.707 m through DN 40 DIN flanged ports.
A single push-button interface configures nine operating modes including proportional pressure, constant pressure, and fixed speed curves. The motor features Class F insulation, an IPX4D splash-proof housing, an EEI of 0.18, and fault alarm relay terminals.
FEATURES
- 15 m maximum head overcomes high piping friction in tall commercial buildings
- Flow capacity of 262 L/Min serves central plant heating distribution
- Permanent magnet motor design achieves a low Energy Efficiency Index of 0.18
- Operating power self-adjusts from 28 W to 615 W based on variable circuit load
- Cast iron EN-GJL-200 pump casing rated for 10 bar maximum operational pressure
- Composite impeller provides longevity in closed-loop water and glycol mixtures
- Digital start/stop terminals and fault relay output facilitate BMS interlocks
SPECIFICATIONS
| Max Flow | 262 L/Min |
| Max Head | 15 m |
| Power | 0.47 kW / 240v |
| Rated Current | 2.71 Amps |
| Suitable For | Flanged Heating Surfaces and Chillers |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to 110°C |
| Inlet Size | 40 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much fluid can this pump evacuate during peak demand?
Discharge throughput on the Grundfos MAGNA1 40-150 F reaches a maximum flow rate of approximately 262 L/Min under standard operating conditions.
How is the pump casing constructed to resist mechanical and fluid wear?
Wetted components on the MAGNA1 40-150 F are crafted from high-grade Cast Iron to maintain physical integrity and resist abrasive wear.
How much electricity and current does this pump draw under load?
Electrical power for the MAGNA1-40-150-F requires a 240v connection, driving an efficient 0.47 kW motor that draws 2.71 Amps.
How deep can this pump be installed underwater in a wet well?
Liquid operating limits establish that the MAGNA1 40 150 F accommodates temperatures -10°C to 110°C during standard duties.
What total dynamic head can this pump overcome in vertical pipework?
Dynamic lift generated by the MAGNA1/40/150/F reaches a maximum elevation head of approximately 15 m across discharge lines.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us