Roll over image to zoom
SKU: 99221292
Grundfos MAGNA1 40-60 F Cast Iron Variable Speed Circulator Pump for Heat Pump Systems with Composite Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Designed for commercial hydronic manifolds and multi-zone heating systems, the Grundfos MAGNA1 40-60 F circulator pump delivers variable-speed flow across air handling units, underfloor headers, and secondary chiller circuits. Its onboard inverter continuously optimizes pump speed based on circuit demand.
The 220 mm port-to-port casing is manufactured from EN-GJL-200 cast iron, housing an engineered composite impeller and canned rotor assembly. Rated for 10 bar operating pressure, the unit withstands circulating water and glycol mixtures from -10°C to 110°C, weighing 9.57 kg.
A high-efficiency 1-phase 230-240 V ECM motor has a maximum power input (P1) of 12 W to 194 W with electrical power input (P1) operating from 12 W up to a peak of 194 W at 1.56 A maximum current. Output metrics achieve a flow rate of 9.78 m³/h (163 L/Min) with a maximum head of 6 m across DN 40 DIN flanged pipe ports.
The unit incorporates an intuitive push-button interface to select between proportional pressure, constant pressure, and fixed speed curves. Ingress protection is certified to IPX4D with Class F insulation, an EEI of 0.20, and an integrated fault signal relay.
FEATURES
- DN 40 flanged casing provides 163 L/Min maximum flow capacity for commercial manifolds
- Electronically commutated motor with integrated VFD achieves an EEI rating of 0.20
- Nine selectable operating modes accommodate radiator, underfloor, and constant flow
- Power consumption self-adjusts between 12 W and 194 W based on thermal demand
- Cast iron EN-GJL-200 housing built for 10 bar maximum system pressure
- Composite impeller offers chemical corrosion resistance in hydronic loops
- Built-in fault relay contact and external digital run input for BMS interface
SPECIFICATIONS
| Max Flow | 163 L/Min |
| Max Head | 6 m |
| Power | 0.14 kW / 240v |
| Rated Current | 1.56 Amps |
| Suitable For | Flanged Heating Surfaces and Mixing Loops |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to 110°C |
| Inlet Size | 40 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What materials are used to construct the pump casing and impeller?
Manufactured with quality materials, the Grundfos MAGNA1 40-60 F incorporates Cast Iron for dependable longevity and resistance to fluid erosion.
What electrical connection and motor power run this pump?
Under full load conditions, the motor in the MAGNA1 40-60 F delivers 0.14 kW on a 240v single-phase line drawing 1.56 Amps.
What fluid temperature limits and immersion depths are rated for this unit?
Tested for thermal durability, the MAGNA1-40-60-F tolerates working fluid temperatures -10°C to 110°C.
How much vertical head pressure can this pump generate?
Fluid elevation through vertical risers reaches up to 6 m with the MAGNA1 40 60 F under standard duty points.
How much water flow can this pump deliver per minute?
Discharge throughput on the MAGNA1/40/60/F reaches a maximum flow rate of approximately 163 L/Min under standard operating conditions.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us