Roll over image to zoom
SKU: 92801881
Grundfos Hydro MPC-E 3 x CRE 64-2-2 Three Phase 3 x 15kW Booster System with CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Processing plants and multi-storey carparks whose boosters never truly idle rely on booster systems with no tolerance for pressure variation, and the Hydro MPC-E 3 CRE 64-2-2 is engineered for exactly that duty. Quote part number 92801881 to have it arrive pre-configured and ready for the plant room.
Flow capacity reaches 5212 L/min. Up to 60 metres of head is available to maintain pressure as demand changes. A Grundfos CU 352 multi-pump controller in the dedicated cabinet handles setpoint control, cascade management and a full alarm picture across all three pumps.
Factory assembled on a common base, the set combines stainless steel pipework, two 200 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge. It connects to a 3 x 380-415 V supply at 60 Hz. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C. Inlet pressure is rated to 16 bar.
Expect it on water supply systems and commercial complexes sites, plus high-rise buildings duties. It provides clean-water pressure boosting for both new plant rooms and refits.
Features
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- At P2 each main pump is 36.46 kW, covering the duty without oversizing the frame.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Grundfos CU 352 controller offers setpoint, cascade and alarm management in one cabinet.
- A suction-side pressure sensor guards the pumps against dry running.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- The stainless steel manifold assembly is supplied with two 200 mm manifold connections.
- Each pump is driven by permanent magnet motors with frequency-controlled speed matching demand.
- Three Grundfos CRE 64-2 pumps share the boosting work in parallel.
What's Included
- 3 x Grundfos CRE 64-2 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- Grundfos CU 352 controller
- Dedicated MPC control cabinet
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 5212 L/Min |
| Max Head | 60 m |
| Power | 3 x 15 kW / 415v |
| Suitable For | Industrial Water Supply, High-Rise Boosting |
| Body Material | Cast Iron |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 200 mm |
| Outlet Size | 200 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which pipework connection sizing and manifold valves are integrated across this booster unit?
Header plumbing on the Grundfos Hydro MPC-E 3 CRE 64-2-2 provides DN200 stainless steel suction and discharge connections accompanied by isolating valves and discharge check valves.
What warranty coverage and service provisions back this multi pump booster unit?
Protection on the Hydro MPC-E 3 CRE 64-2-2 is provided by a comprehensive Grundfos two-year manufacturer warranty with extensive Australian technical service and spare parts support.
Which maximum flow rate does this variable speed booster assembly deliver into pressurised mains?
Under maximum network draw, the Hydro-MPC-E-3-CRE-64-2-2 supplies a peak fluid flow rate of up to 5212 L/min across its variable speed centrifugal stages.
What electrical motor power package drives each centrifugal stage in this booster system?
Propulsion across the Hydro MPC E 3 CRE 64 2 2 is supplied by three variable frequency drive MGE electric motors rated at 15 kW each, operating on a 3 x 380-415 V electrical supply with integrated frequency converters for precise pressure control.
Under high pressure demand, what vertical lift capability does this multi pump unit generate?
For vertical pressure boosting, the 3 CRE 64-2-2 (Hydro MPC-E) produces up to 60 m total elevation head with a 16 bar maximum working pressure envelope.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us