Roll over image to zoom
SKU: Z895-02/2A-3
Lowara Z895-02/2A-3 Stainless Steel 15kW Deep Well 8" Submersible Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Pressure maintenance infrastructure for municipal and industrial complexes utilizes the Z895-02/2A-3 submersible electric pump. This multistage unit is part of the Z895range and provides robust lifting for pressure boosting and high-volume circulation loops. It allows for vertical installation in deep borehole wells or horizontal mounting in tanks where the motor remains at the lowest position.
Constructed from cast 304 Stainless Steel, the delivery head and suction support provide rigidity for borehole service. The two-stage hydraulic end uses reduced diameter impellers to process cleaner water containing up to 100 g/m³ of suspended sand. The assembly weighs 94.2 kg and is rated for liquids up to a maximum temperature of 25°C.
A 15 kW motor powers the hydraulic assembly on a 415v supply with a rated current of 32.1 Amps. The pump achieves a maximum total head of 45.6 m and a maximum flow rate of 1966.7 L/Min while operating at 2900 rpm. These performance values support intensive groundwater distribution and high-capacity fluid optimization in dedicated hydrotherapy systems and large irrigation networks.
Safety features include Class F motor insulation and an IP68 rating for submerged borehole duty. The unit supports immersion depths reaching 350 meters and incorporates double mechanical shaft seals in an oil chamber for fluid containment. Internal POM-C technopolymer wear rings and EPDM 70 bearing bushes support the duplex stainless steel shaft assembly and maintain efficiency.
FEATURES
- Internal technopolymer POM-C wear rings maintain hydraulic clearances and reduce internal friction.
- Stainless steel cable covers provide mechanical protection for the power leads along the pump casing.
- A duplex stainless steel taperlock system secures the semi-axial impellers to the shaft for torque transfer.
- The integrated non-return valve features a stainless steel spring to prevent liquid backflow and water hammer.
- EPDM 70 bearing bushes support the pump shaft assembly and handle the mechanical loads during rotation.
- Mechanical connection of the 8-inch motor follows NEMA standards to allow for compatibility with industrial systems.
- A stainless steel suction strainer is fitted to exclude large solid particles from entering the hydraulic stages.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much total vertical pressure does this borehole unit generate?
With a maximum dynamic head rating of 45.6 m, the Z895-02/2A-3 efficiently lifts groundwater from deep borehole shafts and elevates it to surface storage.
How much volumetric flow per minute is delivered by this unit?
To achieve peak water output reaching 1966.7 L/min, the Z895-02/2A-3 requires a matching Rp 5" delivery pipe connection.
How is the pump protected against corrosion in bore water?
Constructed with AISI 304 stainless steel pump construction, the Z895-02/2A-3 ensures long-term operational reliability underwater.
What voltage and frequency supply is needed for motor operation?
Operating on a 380–415 V, 50 Hz, three-phase power supply, the Z895-02/2A-3 is driven by a 13 kW motor for heavy-duty pumping.
Is a non-return check valve integrated into the pump outlet?
Integrated into the delivery casing of the Z895-02/2A-3 is a spring-loaded non-return valve that limits reverse liquid flow during shutdown.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us