Roll over image to zoom
SKU: Z895-05/3A-3S
Lowara Z895-05/3A-3S Stainless Steel 37kW Deep Well 8" Submersible Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Agricultural supply infrastructure and municipal distribution projects utilize the Z895-05/3A-3S multistage submersible pump for high-capacity extraction. This model incorporates a 316 Stainless Steel motor configuration and belongs to the Z895 manufacturer series. It is designed for vertical borehole installation or horizontal deployment in pressure tanks provided motor immersion is maintained.
Manufactured from cast 304 Stainless Steel, the housing and suction support provide the necessary rigidity for borehole duty cycles. The internal hydraulic end features five stages with three reduced diameter impellers to process clean water with sand content up to 100 g/m³. The electric pump weighs 168.9 kg and is rated for liquids reaching a maximum temperature of 25°C.
The 37 kW motor operates on a 415v supply with a rated current of 81.8 Amps for borehole service. It achieves a maximum total head of 122.2 m and a maximum flow rate of 1966.7 L/Min at a speed of 2900 rpm. These capacities enable dedicated groundwater management for recreational complexes and industrial pressure maintenance infrastructure.
Thermal protection includes Class F insulation and an IP68 enclosure rating for submerged duty in borehole environments. The unit supports installation depths up to 350 meters and features double mechanical seals for shaft containment. Internal tolerances are managed by POM-C technopolymer wear rings and EPDM 70 bearing bushes which support the duplex shaft during continuous operation.
FEATURES
- EPDM 70 bearing bushes support the pump shaft assembly and handle the mechanical loads during rotation.
- A duplex stainless steel taperlock system secures the semi-axial impellers to the shaft for torque transfer.
- Stainless steel cable covers provide mechanical protection for the power leads along the pump casing.
- The integrated non-return valve features a stainless steel spring to prevent liquid backflow and water hammer.
- Internal technopolymer POM-C wear rings maintain hydraulic clearances and reduce internal friction.
- Mechanical connection of the 8-inch motor follows NEMA standards to allow for compatibility with industrial systems.
- A stainless steel suction strainer is fitted to exclude large solid particles from entering the hydraulic stages.
SPECIFICATIONS
| Max Flow | 1966 L/Min |
| Max Head | 122.2 m |
| Power | 37 kW / 415v |
| Rated Current | 81.8 Amps |
| Suitable For | Agricultural Water Transfer |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | Maximum 25°C |
| Outlet Size | 125 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Is the pump casing resistant to corrosion in underground water?
Long-term resistance against aggressive groundwater is ensured because the Z895 05 3A 3S utilizes AISI 304 stainless steel pump construction.
Is a three-phase power connection required to run this motor?
Driven by a robust 37 kW motor, the Z895 05 3A 3S operates on standard 380–415 V, 50 Hz, three-phase power infrastructure.
How is liquid backflow prevented when the motor stops?
The Z895 05 3A 3S supports horizontal installation in pipeline booster stations provided a 3-degree minimum tilt is maintained.
Is this deep-well pump capable of pushing water up steep elevations?
To achieve vertical dynamic lifts up to 122.2 m, the Z895 05 3A 3S utilizes a high-efficiency multi-stage hydraulic assembly designed for heavy duty.
What top outlet connection size is featured on this pump?
Outputting up to 1966.7 L/min through its Rp 5" delivery port, the Z895 05 3A 3S provides rapid fluid distribution for water networks.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us