Roll over image to zoom
SKU: ZN660/14
Lowara ZN660/14 Stainless Steel Deep Well 6" Submersible Bore Pump (Wet End Only) with Radial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
As a standalone hydraulic wet end, the Lowara ZN660/14 represents a technical solution within the Z6 Series range of submersible borehole pumps. Operating this wet end requires secure coupling with a compatible 22 kW electric motor of the appropriate power rating. Designed for secure installation inside standard 6-inch deep wells, the assembly operates inside standard casings. It is suitable for groundwater lowering and dewatering systems, municipal supply lines, and agricultural distribution projects.
To support long-term physical stability during operation, the structural sleeve and discharge head are engineered from cast AISI 316 Stainless Steel. The multi-stage centrifugal hydraulic assembly consists of 14 stages, each incorporating an AISI 316L stainless steel radial impeller. The integrated radial impellers are designed to limit abrasive wear from sand particles, supporting water containing up to 100 g/m³ of suspended sand.
Once paired with its designated 22 kW electric motor (nominal current rating of 47.3 Amps), the coupled assembly achieves up to 150 m maximum head. This multi-stage hydraulic wet end generates a maximum flow of 1,300 L/Min through its Rp 80 mm threaded connection. All performance parameters are in accordance with manufacturer technical specifications.
The pump has a maximum external diameter of 142 mm for installation inside standard 6-inch borehole wells. Maximum pump immersion depth is 300 m when used with C4S motors and 350 m when used with L6W motors. The lower support bracket incorporates a standard 6" NEMA-compliant mount for simple mechanical motor integration. Safe coupling requires correct mechanical alignment of the pump shaft and the motor shaft during mechanical coupling.
FEATURES
- Constructed entirely from AISI 316 Stainless Steel for corrosion protection and structural durability.
- Equipped with 14 multi-stage radial centrifugal impellers manufactured from AISI 316L stainless steel.
- Includes an integrated spring-loaded AISI 316 non-return valve in the discharge head to prevent backflow and maintain system pressure.
- Features a high-strength Duplex Stainless Steel pump shaft and sleeves.
- Equipped with a standard 6" NEMA-compliant motor support bracket and coupling for easy motor integration.
- ErP/Ecodesign compliant with a Minimum Efficiency Index (MEI) of 0.40 or higher, optimizing energy performance.
- Designed with a compact 142 mm maximum external diameter for secure installation inside 6-inch deep well boreholes.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What voltage and kilowatt power specifications are required to run this motor?
Powering the heavy-duty assembly of the ZN660/14 requires a 6-inch NEMA L6W motor of 22 kW supported by 380–415 V, 50 Hz, three-phase drawing 47.3 A.
Is a non-return valve integrated into the pump head and is horizontal mounting supported?
Piping system integrity is maintained by an integrated stainless steel non-return valve in the ZN660-14, which also permits horizontal installation at a minimum recommended 3° incline with the motor lowest.
Can this deep well water pump push water up from significant subterranean depths?
Overcoming tall vertical column drops, the ZN 660 14 generates a maximum dynamic head of approximately 150 m, maintaining flow across surface pipelines.
What size outlet connection is on this pump and what is the maximum discharge rate?
The top discharge connection utilizes standard Rp 3" (80 mm) sizing, allowing the ZN_660_14 to achieve a peak flow rate of approximately 1300 L/Min in standard 6-inch borehole installations.
What wear-resistant materials protect this submersible pump from borehole grit?
Preventing corrosion in harsh borehole installations, the ZN660/14 relies on AISI 316 stainless steel pump end, AISI 316L stainless steel impellers and diffusers with removable wear rings, Duplex UNS S 31803 shaft, and Duplex UNS S 32304 coupling and tolerates abrasive sand up to 100 g/m³.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us